mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-22 14:43:30 +00:00
03d66d6b8f
Globalscale SheevaPlug: * Marvell Kirkwood 88F6281 * 512 MB SDRAM * 512 MB Flash * Gigabit Network * USB 2.0 * SD slot * Serial console The device is supported in mainline uboot/linux the commit adds only some openwrt config for building an image. Installation: 1 - Update uboot: setenv ipaddr '192.168.0.111' setenv serverip '192.168.0.1' tftpboot u-boot.kwb nand erase 0x0 0x100000 nand write 0x800000 0x0 0x100000 reset 2 - Install OpenWRT: setenv ethaddr 00:50:43:01:xx:xx saveenv setenv ipaddr '192.168.0.111' setenv serverip '192.168.0.1' tftpboot openwrt-kirkwood-globalscale_sheevaplug-squashfs-factory.bin nand erase.part ubi nand write 0x800000 ubi 0x600000 reset Signed-off-by: BERENYI Balazs <balazs@wee.hu> Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> [add vendor name for uboot-kirkwood, merge patches, copy to 5.10, add AUTORELEASE for uboot-kirkwood, refresh patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
48 lines
1.1 KiB
Diff
48 lines
1.1 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
|
|
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
|
|
@@ -78,13 +78,8 @@
|
|
};
|
|
|
|
partition@100000 {
|
|
- label = "uImage";
|
|
- reg = <0x0100000 0x400000>;
|
|
- };
|
|
-
|
|
- partition@500000 {
|
|
- label = "root";
|
|
- reg = <0x0500000 0x1fb00000>;
|
|
+ label = "ubi";
|
|
+ reg = <0x0100000 0x1ff00000>;
|
|
};
|
|
};
|
|
|
|
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
|
|
@@ -13,6 +13,13 @@
|
|
model = "Globalscale Technologies SheevaPlug";
|
|
compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_health;
|
|
+ led-failsafe = &led_health;
|
|
+ led-running = &led_health;
|
|
+ led-upgrade = &led_health;
|
|
+ };
|
|
+
|
|
ocp@f1000000 {
|
|
mvsdio@90000 {
|
|
pinctrl-0 = <&pmx_sdio>;
|
|
@@ -28,10 +35,10 @@
|
|
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
|
|
pinctrl-names = "default";
|
|
|
|
- health {
|
|
+ led_health: health {
|
|
label = "sheevaplug:blue:health";
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
|
- default-state = "keep";
|
|
+ default-state = "on";
|
|
};
|
|
|
|
misc {
|