RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-22 14:43:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
01885bc6a3
openwrt/include/image-commands.mk
Maximilian Martin 906e2a1b99 ath79: Add support for MOXA AWK-1137C 
Device specifications:
======================

* Qualcomm/Atheros AR9344
* 128 MB of RAM
* 16 MB of SPI NOR flash
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4/5 GHz Wi-Fi
* 4x GPIO-LEDs (1x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* 2x fast ethernet
  - lan1
    + builtin switch port 1
    + used as WAN interface
  - lan2
    + builtin switch port 2
    + used as LAN interface
* 9-30V DC
* external antennas

Flashing instructions:
======================

Log in to https://192.168.127.253/
   Username: admin
   Password: moxa

Open Maintenance > Firmware Upgrade and install the factory image.

Serial console access:
======================

Connect a RS232-USB converter to the maintenance port.
   Pinout: (reset button left) [GND] [NC] [RX] [TX]

Firmware Recovery:
==================

When the WLAN and SYS LEDs are flashing, the device is in recovery mode.

Serial console access is required to proceed with recovery.

Download the original image from MOXA and rename it to 'awk-1137c.rom'.
Set up a TFTP server at 192.168.127.1 and connect to a lan port.

Follow the instructions on the serial console to start the recovery.

Signed-off-by: Maximilian Martin <mm@simonwunderlich.de>
2023-06-25 12:59:26 +02:00

635 lines
19 KiB
Makefile
Raw Blame History

# Build commands that can be called from Device/* templates
IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)
define ModelNameLimit16
$(shell printf %.16s "$(word 2, $(subst _, ,$(1)))")
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define Build/append-dtb
cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef
define Build/append-dtb-elf
$(TARGET_CROSS)objcopy \
--set-section-flags=.appended_dtb=alloc,contents \
--update-section \
.appended_dtb=$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef
define Build/append-kernel
dd if=$(IMAGE_KERNEL) >> $@
endef
define Build/package-kernel-ubifs
mkdir $@.kernelubifs
cp $@ $@.kernelubifs/kernel
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
$(KERNEL_UBIFS_OPTS) \
-r $@.kernelubifs $@
rm -r $@.kernelubifs
endef
define Build/append-image
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
ifdef IB
define Build/append-image-stage
dd if=$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1) >> $@
endef
else
define Build/append-image-stage
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
mkdir -p "$(STAGING_DIR_IMAGE)"
dd if="$@.stripmeta" of="$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1)"
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
endif
compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')
legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
device 1.0. Please wipe config during upgrade (force required) or reinstall. \
$(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)
metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
"metadata_version": "1.1", \
"compat_version": "$(call json_quote,$(compat_version))", \
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
"target": "$(call json_quote,$(TARGETID))", \
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
define Build/append-metadata
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
ucert -A -c "$@.ucert" -x "$@.sig" ;\
fwtool -S "$@.ucert" "$@" ;\
}
endef
define Build/append-rootfs
dd if=$(IMAGE_ROOTFS) >> $@
endef
define Build/append-squashfs-fakeroot-be
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs3-lzma \
$@.fakefs $@.fakesquashfs \
-noappend -root-owned -be -nopad -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
cat $@.fakesquashfs >> $@
endef
define Build/append-squashfs4-fakeroot
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs4 \
$@.fakefs $@.fakesquashfs \
-nopad -noappend -root-owned
cat $@.fakesquashfs >> $@
endef
define Build/append-string
echo -n $(1) >> $@
endef
define Build/append-md5sum-ascii-salted
cp $@ $@.salted
echo -ne $(1) >> $@.salted
$(STAGING_DIR_HOST)/bin/mkhash md5 $@.salted | head -c32 >> $@
rm $@.salted
endef
define Build/append-ubi
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
$(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
--rootfs $(IMAGE_ROOTFS) \
$@.tmp \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/ubinize-kernel
cp $@ $@.tmp
sh $(TOPDIR)/scripts/ubinize-image.sh \
--kernel $@.tmp \
$@ \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
rm $@.tmp
endef
define Build/append-uboot
dd if=$(UBOOT_PATH) >> $@
endef
# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
$(eval type=$(word 1,$(1)))
$(eval magic=$(word 2,$(1)))
touch $@.fakehdr
$(STAGING_DIR_HOST)/bin/mkimage \
-A $(LINUX_KARCH) -O linux -T $(type) -C none \
-n '$(VERSION_DIST) fake $(type)' \
$(if $(magic),-M $(magic)) \
-d $@.fakehdr \
-s \
$@.fakehdr
cat $@.fakehdr >> $@
endef
define Build/buffalo-dhp-image
$(STAGING_DIR_HOST)/bin/mkdhpimg $@ $@.new
mv $@.new $@
endef
define Build/buffalo-enc
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval args=$(wordlist 3,$(words $(1)),$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-enc \
-p $(product) -v $(version) $(args) \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/buffalo-enc-tag
$(call Build/buffalo-enc,'' '' -S 152 $(1))
endef
define Build/buffalo-tag-dhp
$(eval product=$(word 1,$(1)))
$(eval region=$(word 2,$(1)))
$(eval language=$(word 3,$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-tag \
-d 0x01000000 -w 1 \
-a $(BUFFALO_TAG_PLATFORM) \
-v $(BUFFALO_TAG_VERSION) -m $(BUFFALO_TAG_MINOR) \
-b $(product) -p $(product) \
-r $(region) -r $(region) -l $(language) \
-I $@ -o $@.new
mv $@.new $@
endef
define Build/check-size
@imagesize="$$(stat -c%s $@)"; \
limitsize="$$(($(subst k,* 1024,$(subst m, * 1024k,$(if $(1),$(1),$(IMAGE_SIZE))))))"; \
[ $$limitsize -ge $$imagesize ] || { \
$(call ERROR_MESSAGE, WARNING: Image file $@ is too big: $$imagesize > $$limitsize); \
rm -f $@; \
}
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
define Build/edimax-header
$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/elecom-product-header
$(eval product=$(word 1,$(1)))
$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
( \
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
dd if=$(fw); \
) > $(fw).new
mv $(fw).new $(fw)
endef
define Build/elecom-wrc-gs-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval hash_opt=$(word 3,$(1)))
$(MKHASH) md5 $(hash_opt) $@ >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/elx-header
$(eval hw_id=$(word 1,$(1)))
$(eval xor_pattern=$(word 2,$(1)))
( \
echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
dd bs=42 count=1 conv=sync; \
hw_id="$(hw_id)"; \
echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
dd bs=20 count=1 conv=sync; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=8 count=1 conv=sync; \
echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=58 count=1 conv=sync; \
) > $(KDIR)/tmp/$(DEVICE_NAME).header
$(call Build/xor-image,-p $(xor_pattern) -x)
cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
mv $@.new $@
rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
endef
define Build/eva-image
$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
mv $@.new $@
endef
define Build/initrd_compression
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_BZIP2),.bzip2) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_GZIP),.gzip) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZ4),.lz4) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA),.lzma) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZO),.lzo) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_XZ),.xz) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
endef
define Build/fit
$(TOPDIR)/scripts/mkits.sh \
-D $(DEVICE_NAME) -o $@.its -k $@ \
-C $(word 1,$(1)) \
$(if $(word 2,$(1)),\
$(if $(findstring 11,$(if $(DEVICE_DTS_OVERLAY),1)$(if $(findstring $(KERNEL_BUILD_DIR)/image-,$(word 2,$(1))),,1)), \
-d $(KERNEL_BUILD_DIR)/image-$$(basename $(word 2,$(1))), \
-d $(word 2,$(1)))) \
$(if $(findstring with-rootfs,$(word 3,$(1))),-r $(IMAGE_ROOTFS)) \
$(if $(findstring with-initrd,$(word 3,$(1))), \
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
-i $(KERNEL_BUILD_DIR)/initrd.cpio$(strip $(call Build/initrd_compression)))) \
-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
$(if $(DEVICE_DTS_LOADADDR),-s $(DEVICE_DTS_LOADADDR)) \
$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new
@mv $@.new $@
endef
define Build/libdeflate-gzip
$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip
$(STAGING_DIR_HOST)/bin/gzip -f -9n -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip-filename
@mkdir -p $@.tmp
@cp $@ $@.tmp/$(word 1,$(1))
$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $@.tmp/$(word 1,$(1)) $(word 2,$(1)))
$(STAGING_DIR_HOST)/bin/gzip -f -9 -N -c $@.tmp/$(word 1,$(1)) $(word 2,$(1)) > $@.new
@mv $@.new $@
@rm -rf $@.tmp
endef
define Build/install-dtb
$(call locked, \
$(foreach dts,$(DEVICE_DTS), \
$(CP) \
$(DTS_DIR)/$(dts).dtb \
$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
), \
install-dtb-$(IMG_PREFIX) \
)
endef
define Build/iptime-crc32
$(STAGING_DIR_HOST)/bin/iptime-crc32 $(1) $@ $@.new
mv $@.new $@
endef
define Build/iptime-naspkg
$(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ $@.new
mv $@.new $@
endef
define Build/jffs2
rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \
cp $@ $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$(1) && \
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad \
$(if $(CONFIG_BIG_ENDIAN),--big-endian,--little-endian) \
--squash-uids -v -e $(patsubst %k,%KiB,$(BLOCKSIZE)) \
-o $@.new \
-d $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 \
2>&1 1>/dev/null | awk '/^.+$$$$/' && \
$(STAGING_DIR_HOST)/bin/padjffs2 $@.new -J $(patsubst %k,,$(BLOCKSIZE))
-rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/
@mv $@.new $@
endef
define Build/kernel2minor
$(eval temp_file := $(shell mktemp))
cp $@ $(temp_file)
kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
mv $(temp_file).new $@
rm -f $(temp_file)
endef
define Build/kernel-bin
rm -f $@
cp $< $@
endef
define Build/linksys-image
$(TOPDIR)/scripts/linksys-image.sh \
"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
$@ $@.new
mv $@.new $@
endef
define Build/lzma
$(call Build/lzma-no-dict,-lc1 -lp2 -pb2 $(1))
endef
define Build/lzma-no-dict
$(STAGING_DIR_HOST)/bin/lzma e $@ $(1) $@.new
@mv $@.new $@
endef
define Build/moxa-encode-fw
$(TOPDIR)/scripts/moxa-encode-fw.py \
--input $@ \
--output $@ \
--magic $(MOXA_MAGIC) \
--hwid $(MOXA_HWID) \
--buildid 00000000
endef
define Build/netgear-chk
$(STAGING_DIR_HOST)/bin/mkchkimg \
-o $@.new \
-k $@ \
-b $(NETGEAR_BOARD_ID) \
$(if $(NETGEAR_REGION),-r $(NETGEAR_REGION),)
mv $@.new $@
endef
define Build/netgear-dni
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(NETGEAR_BOARD_ID) -v $(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-r "$(1)" \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/netgear-encrypted-factory
$(TOPDIR)/scripts/netgear-encrypted-factory.py \
--input-file $@ \
--output-file $@ \
--model $(NETGEAR_ENC_MODEL) \
--region $(NETGEAR_ENC_REGION) \
--version V1.0.0.0.$(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
--encryption-block-size 0x20000 \
--openssl-bin "$(STAGING_DIR_HOST)/bin/openssl" \
--key 6865392d342b4d212964363d6d7e7765312c7132613364316e26322a5a5e2538 \
--iv 4a253169516c38243d6c6d2d3b384145
endef
define Build/openmesh-image
$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
"$@-fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
"$(call param_get_default,rootfs,$(1),$@)"
$(TOPDIR)/scripts/combined-ext-image.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
"$@-fwupgrade.cfg" "fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
define Build/pad-extra
dd if=/dev/zero bs=$(1) count=1 >> $@
endef
define Build/pad-offset
let \
size="$$(stat -c%s $@)" \
pad="$(subst k,* 1024,$(word 1, $(1)))" \
offset="$(subst k,* 1024,$(word 2, $(1)))" \
pad="(pad - ((size + offset) % pad)) % pad" \
newsize='size + pad'; \
dd if=$@ of=$@.new bs=$$newsize count=1 conv=sync
mv $@.new $@
endef
define Build/pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \
$(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256)
endef
define Build/pad-to
$(call Image/pad-to,$@,$(1))
endef
define Build/patch-cmdline
$(STAGING_DIR_HOST)/bin/patch-cmdline $@ '$(CMDLINE)'
endef
# Convert a raw image into a $1 type image.
# E.g. | qemu-image vdi <optional extra arguments to qemu-img binary>
define Build/qemu-image
if command -v qemu-img; then \
qemu-img convert -f raw -O $1 $@ $@.new; \
mv $@.new $@; \
else \
echo "WARNING: Install qemu-img to create VDI/VMDK images" >&2; exit 1; \
fi
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nor
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ \
-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
mv $@.seama $@
endef
define Build/seama-seal
$(STAGING_DIR_HOST)/bin/seama -i $@ -s $@.seama \
-m "signature=$(SEAMA_SIGNATURE)"
mv $@.seama $@
endef
define Build/senao-header
$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
mv $@.new $@
endef
define Build/sysupgrade-tar
sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
--kernel $(call param_get_default,kernel,$(1),$(IMAGE_KERNEL)) \
--rootfs $(call param_get_default,rootfs,$(1),$(IMAGE_ROOTFS)) \
$@
endef
define Build/tplink-safeloader
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_ID) \
-V $(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v1-header
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V $(REVISION) \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/tplink-v1-image
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
-N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v2-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/tplink-v2-image
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1)
cat $@.new >> $@
rm -rf $@.new
endef
define Build/uImage
$(if $(UIMAGE_TIME),SOURCE_DATE_EPOCH="$(UIMAGE_TIME)") \
mkimage \
-A $(LINUX_KARCH) \
-O linux \
-T kernel \
-C $(word 1,$(1)) \
-a $(KERNEL_LOADADDR) \
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
$(wordlist 2,$(words $(1)),$(1)) \
-d $@ $@.new
mv $@.new $@
endef
define Build/xor-image
$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
mv $@.xor $@
endef
define Build/zip
rm -rf $@.tmp
mkdir $@.tmp
mv $@ $@.tmp/$(word 1,$(1))
TZ=UTC $(STAGING_DIR_HOST)/bin/zip -j -X \
$(wordlist 2,$(words $(1)),$(1)) \
$@ $@.tmp/$(if $(word 1,$(1)),$(word 1,$(1)),$$(basename $@))
rm -rf $@.tmp
endef
define Build/zyxel-ras-image
let \
newsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
$(STAGING_DIR_HOST)/bin/mkrasimage \
-b $(RAS_BOARD) \
-v $(RAS_VERSION) \
-r $@ \
-s $$newsize \
-o $@.new \
$(if $(findstring separate-kernel,$(word 1,$(1))),-k $(IMAGE_KERNEL)) \
&& mv $@.new $@
endef
Reference in New Issue View Git Blame Copy Permalink