openwrt/target/linux/mediatek/patches-6.6/410-bt-mtk-serial-fix.patch

34 lines
1.1 KiB
Diff

--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -86,6 +86,7 @@ struct serial8250_config {
* STOP PARITY EPAR SPAR WLEN5 WLEN6
*/
#define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */
+#define UART_CAP_NMOD BIT(19) /* UART doesn't do termios */
#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -287,7 +287,7 @@ static const struct serial8250_config ua
.tx_loadsz = 16,
.fcr = UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_NMOD,
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
@@ -2774,6 +2774,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;
+ if (up->capabilities & UART_CAP_NMOD) {
+ termios->c_cflag = 0;
+ return;
+ }
+
if (up->capabilities & UART_CAP_MINI) {
termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
if ((termios->c_cflag & CSIZE) == CS5 ||