# SPDX-License-Identifier: GPL-2.0-only # # Copyright (C) 2012-2016 OpenWrt.org # Copyright (C) 2016 LEDE-project.org DTS_DIR := $(DTS_DIR)/marvell define Build/fortigate-header ( \ dd if=/dev/zero bs=384 count=1 2>/dev/null; \ datalen=$$(wc -c $@ | cut -d' ' -f1); \ datalen=$$(printf "%08x" $$datalen); \ datalen="$${datalen:6:2}$${datalen:4:2}$${datalen:2:2}$${datalen:0:2}"; \ printf $$(echo "00020000$${datalen}ffff0000ffff0000" | sed 's/../\\x&/g'); \ dd if=/dev/zero bs=112 count=1 2>/dev/null; \ cat $@; \ ) > $@.new mv $@.new $@ endef define Build/seil-header ( \ data_size_crc="$$(gzip -c $@ | tail -c8 | \ od -An -tx8 --endian little | tr -d ' \n')"; \ printf "SEIL2015"; \ printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \ dd bs=80 count=1 conv=sync 2>/dev/null; \ printf "$$(echo $${data_size_crc:8:8} | sed 's/../\\x&/g')"; \ printf "\x00\x00\x00\x01\x00\x00\x00\x09\x00\x00\x00\x63"; \ printf "$(REVISION)" | dd bs=32 count=1 conv=sync 2>/dev/null; \ printf "\x00\x00\x00\x00"; \ printf "$$(echo $${data_size_crc:0:8} | sed 's/../\\x&/g')"; \ cat $@; \ ) > $@.new mv $@.new $@ endef define Device/dsa-migration DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA endef define Device/kernel-size-migration DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \ Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required. endef define Device/buffalo_ls220de $(Device/NAND-128K) DEVICE_VENDOR := Buffalo DEVICE_MODEL := LinkStation LS220DE KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c 172 -x none KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-ubifs KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none DEVICE_DTS := armada-370-buffalo-ls220de DEVICE_PACKAGES := \ kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-linkstation-poweroff \ kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-fs-xfs \ mdadm mkf2fs e2fsprogs partx-utils endef TARGET_DEVICES += buffalo_ls220de define Device/buffalo_ls421de $(Device/NAND-128K) DEVICE_VENDOR := Buffalo DEVICE_MODEL := LinkStation LS421DE SUBPAGESIZE := KERNEL_SIZE := 33554432 FILESYSTEMS := squashfs ubifs KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2 KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none DEVICE_DTS := armada-370-buffalo-ls421de DEVICE_PACKAGES := \ kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \ kmod-linkstation-poweroff kmod-md-raid0 kmod-md-raid1 kmod-md-mod \ kmod-fs-xfs mkf2fs e2fsprogs partx-utils endef TARGET_DEVICES += buffalo_ls421de define Device/ctera_c200-v2 PAGESIZE := 2048 SUBPAGESIZE := 512 BLOCKSIZE := 128k DEVICE_VENDOR := Ctera DEVICE_MODEL := C200 DEVICE_VARIANT := V2 SOC := armada-370 KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware KERNEL_IN_UBI := KERNEL_SUFFIX := -factory.firm DEVICE_PACKAGES := \ kmod-gpio-button-hotplug kmod-hwmon-drivetemp kmod-hwmon-nct7802 \ kmod-rtc-s35390a kmod-usb3 kmod-usb-ledtrig-usbport IMAGES := sysupgrade.bin endef TARGET_DEVICES += ctera_c200-v2 define Device/cznic_turris-omnia DEVICE_VENDOR := CZ.NIC DEVICE_MODEL := Turris Omnia KERNEL_INSTALL := 1 SOC := armada-385 KERNEL := kernel-bin KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb DEVICE_PACKAGES := \ mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \ wpad-basic-mbedtls kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \ kmod-mt7915-firmware partx-utils kmod-i2c-mux-pca954x kmod-leds-turris-omnia IMAGES := sysupgrade.img.gz IMAGE/sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata SUPPORTED_DEVICES += armada-385-turris-omnia BOOT_SCRIPT := turris-omnia endef TARGET_DEVICES += cznic_turris-omnia define Device/fortinet DEVICE_VENDOR := Fortinet SOC := armada-385 KERNEL := kernel-bin | append-dtb KERNEL_SIZE := 6144k IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \ sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := kmod-hwmon-nct7802 endef define Device/fortinet_fg-30e $(Device/fortinet) DEVICE_MODEL := FortiGate 30E DEVICE_DTS := armada-385-fortinet-fg-30e KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FGT30E endef TARGET_DEVICES += fortinet_fg-30e define Device/fortinet_fg-50e $(Device/fortinet) DEVICE_MODEL := FortiGate 50E DEVICE_DTS := armada-385-fortinet-fg-50e KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FGT50E endef TARGET_DEVICES += fortinet_fg-50e define Device/fortinet_fg-51e $(Device/fortinet) DEVICE_MODEL := FortiGate 51E DEVICE_DTS := armada-385-fortinet-fg-51e KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FGT51E endef TARGET_DEVICES += fortinet_fg-51e define Device/fortinet_fg-52e $(Device/fortinet) DEVICE_MODEL := FortiGate 52E DEVICE_DTS := armada-385-fortinet-fg-52e KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FGT52E endef TARGET_DEVICES += fortinet_fg-52e define Device/fortinet_fwf-50e-2r $(Device/fortinet) DEVICE_MODEL := FortiWiFi 50E-2R DEVICE_DTS := armada-385-fortinet-fwf-50e-2r KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FW502R DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct \ wpad-basic-mbedtls endef TARGET_DEVICES += fortinet_fwf-50e-2r define Device/fortinet_fwf-51e $(Device/fortinet) DEVICE_MODEL := FortiWiFi 51E DEVICE_DTS := armada-385-fortinet-fwf-51e KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ gzip-filename FWF51E DEVICE_PACKAGES += kmod-ath9k wpad-basic-mbedtls endef TARGET_DEVICES += fortinet_fwf-51e define Device/globalscale_mirabox $(Device/NAND-512K) DEVICE_VENDOR := Globalscale DEVICE_MODEL := Mirabox SOC := armada-370 SUPPORTED_DEVICES += mirabox endef TARGET_DEVICES += globalscale_mirabox define Device/iij_sa-w2 DEVICE_VENDOR := IIJ DEVICE_MODEL := SA-W2 SOC := armada-380 KERNEL := kernel-bin | append-dtb | seil-header DEVICE_DTS := armada-380-iij-sa-w2 IMAGE_SIZE := 15360k IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-rootfs | pad-rootfs | check-size | append-metadata DEVICE_PACKAGES := kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \ wpad-basic-mbedtls endef TARGET_DEVICES += iij_sa-w2 define Device/iptime_nas1dual DEVICE_VENDOR := ipTIME DEVICE_MODEL := NAS1dual DEVICE_PACKAGES := kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb3 SOC := armada-385 KERNEL := kernel-bin | append-dtb | iptime-naspkg nas1dual KERNEL_SIZE := 6144k IMAGES := sysupgrade.bin IMAGE_SIZE := 64256k IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \ append-rootfs | pad-rootfs | check-size | append-metadata endef TARGET_DEVICES += iptime_nas1dual define Device/kobol_helios4 DEVICE_VENDOR := Kobol DEVICE_MODEL := Helios4 KERNEL_INSTALL := 1 KERNEL := kernel-bin DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils IMAGES := sdcard.img.gz IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata SOC := armada-388 UBOOT := helios4-u-boot-with-spl.kwb BOOT_SCRIPT := clearfog endef TARGET_DEVICES += kobol_helios4 define Device/linksys $(Device/NAND-128K) DEVICE_VENDOR := Linksys DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-mbedtls IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | pad-to $$$$(PAGESIZE) KERNEL_SIZE := 6144k endef define Device/linksys_wrt1200ac $(call Device/linksys) $(Device/dsa-migration) DEVICE_MODEL := WRT1200AC DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := Caiman DEVICE_DTS := armada-385-linksys-caiman DEVICE_PACKAGES += mwlwifi-firmware-88w8864 SUPPORTED_DEVICES += armada-385-linksys-caiman linksys,caiman endef TARGET_DEVICES += linksys_wrt1200ac define Device/linksys_wrt1900acs $(call Device/linksys) $(Device/dsa-migration) DEVICE_MODEL := WRT1900ACS DEVICE_VARIANT := v1 DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := WRT1900ACS DEVICE_ALT0_VARIANT := v2 DEVICE_ALT1_VENDOR := Linksys DEVICE_ALT1_MODEL := Shelby DEVICE_DTS := armada-385-linksys-shelby DEVICE_PACKAGES += mwlwifi-firmware-88w8864 SUPPORTED_DEVICES += armada-385-linksys-shelby linksys,shelby endef TARGET_DEVICES += linksys_wrt1900acs define Device/linksys_wrt1900ac-v1 $(call Device/linksys) $(Device/kernel-size-migration) DEVICE_MODEL := WRT1900AC DEVICE_VARIANT := v1 DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := Mamba DEVICE_DTS := armada-xp-linksys-mamba DEVICE_PACKAGES += mwlwifi-firmware-88w8864 KERNEL_SIZE := 4096k SUPPORTED_DEVICES += armada-xp-linksys-mamba linksys,mamba endef TARGET_DEVICES += linksys_wrt1900ac-v1 define Device/linksys_wrt1900ac-v2 $(call Device/linksys) $(Device/dsa-migration) DEVICE_MODEL := WRT1900AC DEVICE_VARIANT := v2 DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := Cobra DEVICE_DTS := armada-385-linksys-cobra DEVICE_PACKAGES += mwlwifi-firmware-88w8864 SUPPORTED_DEVICES += armada-385-linksys-cobra linksys,cobra endef TARGET_DEVICES += linksys_wrt1900ac-v2 define Device/linksys_wrt3200acm $(call Device/linksys) $(Device/dsa-migration) DEVICE_MODEL := WRT3200ACM DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := Rango DEVICE_DTS := armada-385-linksys-rango DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964 SUPPORTED_DEVICES += armada-385-linksys-rango linksys,rango endef TARGET_DEVICES += linksys_wrt3200acm define Device/linksys_wrt32x $(call Device/linksys) $(Device/kernel-size-migration) DEVICE_MODEL := WRT32X DEVICE_ALT0_VENDOR := Linksys DEVICE_ALT0_MODEL := Venom DEVICE_DTS := armada-385-linksys-venom DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964 KERNEL_SIZE := 6144k KERNEL := kernel-bin | append-dtb SUPPORTED_DEVICES += armada-385-linksys-venom linksys,venom endef TARGET_DEVICES += linksys_wrt32x define Device/marvell_a370-db $(Device/NAND-512K) DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada 370 Development Board (DB-88F6710-BP-DDR3) DEVICE_DTS := armada-370-db SUPPORTED_DEVICES += armada-370-db endef TARGET_DEVICES += marvell_a370-db define Device/marvell_a370-rd $(Device/NAND-512K) DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada 370 RD (RD-88F6710-A1) DEVICE_DTS := armada-370-rd SUPPORTED_DEVICES += armada-370-rd endef TARGET_DEVICES += marvell_a370-rd define Device/marvell_a385-db-ap $(Device/NAND-256K) DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP) DEVICE_DTS := armada-385-db-ap IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | pad-to $$$$(PAGESIZE) KERNEL_SIZE := 8192k SUPPORTED_DEVICES += armada-385-db-ap endef TARGET_DEVICES += marvell_a385-db-ap define Device/marvell_a388-rd DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada 388 RD (RD-88F6820-AP) DEVICE_DTS := armada-388-rd IMAGES := firmware.bin IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd endef TARGET_DEVICES += marvell_a388-rd define Device/marvell_axp-db $(Device/NAND-512K) DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada XP Development Board (DB-78460-BP) DEVICE_DTS := armada-xp-db SUPPORTED_DEVICES += armada-xp-db endef TARGET_DEVICES += marvell_axp-db define Device/marvell_axp-gp $(Device/NAND-512K) DEVICE_VENDOR := Marvell DEVICE_MODEL := Armada Armada XP GP (DB-MV784MP-GP) DEVICE_DTS := armada-xp-gp SUPPORTED_DEVICES += armada-xp-gp endef TARGET_DEVICES += marvell_axp-gp define Device/plathome_openblocks-ax3-4 DEVICE_VENDOR := Plat'Home DEVICE_MODEL := OpenBlocks AX3 DEVICE_VARIANT := 4 ports SOC := armada-xp SUPPORTED_DEVICES += openblocks-ax3-4 BLOCKSIZE := 128k PAGESIZE := 1 IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi endef TARGET_DEVICES += plathome_openblocks-ax3-4 define Device/solidrun_clearfog-base-a1 DEVICE_VENDOR := SolidRun DEVICE_MODEL := ClearFog Base KERNEL_INSTALL := 1 KERNEL := kernel-bin DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils IMAGES := sdcard.img.gz IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro UBOOT := clearfog-u-boot-with-spl.kwb BOOT_SCRIPT := clearfog SUPPORTED_DEVICES += armada-388-clearfog-base DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Ethernet interface rename has been dropped endef TARGET_DEVICES += solidrun_clearfog-base-a1 define Device/solidrun_clearfog-pro-a1 $(Device/dsa-migration) DEVICE_VENDOR := SolidRun DEVICE_MODEL := ClearFog Pro KERNEL_INSTALL := 1 KERNEL := kernel-bin DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils IMAGES := sdcard.img.gz IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base UBOOT := clearfog-u-boot-with-spl.kwb BOOT_SCRIPT := clearfog SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro endef TARGET_DEVICES += solidrun_clearfog-pro-a1 define Device/synology_ds213j DEVICE_VENDOR := Synology DEVICE_MODEL := DS213j KERNEL_SIZE := 6912k IMAGE_SIZE := 7168k FILESYSTEMS := squashfs ubifs KERNEL := kernel-bin | append-dtb | uImage none KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none DEVICE_DTS := armada-370-synology-ds213j IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ check-size | append-metadata DEVICE_PACKAGES := \ kmod-rtc-s35390a kmod-hwmon-gpiofan kmod-hwmon-drivetemp \ kmod-md-raid0 kmod-md-raid1 kmod-md-mod e2fsprogs mdadm \ -ppp -kmod-nft-offload -firewall4 -dnsmasq -odhcpd-ipv6only endef TARGET_DEVICES += synology_ds213j