define Build/dongwon-header head -c 4 $@ > $@.tmp head -c 8 /dev/zero >> $@.tmp tail -c +9 $@ >> $@.tmp ( \ header_crc="$$(head -c 68 $@.tmp | gzip -c | \ tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \ printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \ dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \ ) mv $@.tmp $@ endef # attention: only zlib compression is allowed for the boot fs define Build/zyxel-buildkerneljffs mkdir -p $@.tmp/boot cp $@ $@.tmp/boot/vmlinux.lzma.uImage $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \ -o $@ \ -d $@.tmp rm -rf $@.tmp endef define Build/zyxel-factory let \ maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \ let size="$$(stat -c%s $@)"; \ if [ $$size -lt $$maxsize ]; then \ $(STAGING_DIR_HOST)/bin/mkrasimage \ -b $(RAS_BOARD) \ -v $(RAS_VERSION) \ -r $@ \ -s $$maxsize \ -o $@.new \ -l 131072 \ && mv $@.new $@ ; \ fi endef define Device/8dev_rambutan SOC := qca9557 DEVICE_VENDOR := 8devices DEVICE_MODEL := Rambutan DEVICE_PACKAGES := kmod-usb2 BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_SIZE := 4096k KERNEL_IN_UBI := 1 IMAGES := factory.bin sysupgrade.tar IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata IMAGE/factory.bin := append-ubi endef TARGET_DEVICES += 8dev_rambutan define Device/aerohive_hiveap-121 SOC := ar9344 DEVICE_VENDOR := Aerohive DEVICE_MODEL := HiveAP 121 DEVICE_PACKAGES := kmod-usb2 BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 116m KERNEL_SIZE := 5120k UBINIZE_OPTS := -E 5 SUPPORTED_DEVICES += hiveap-121 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += aerohive_hiveap-121 define Device/domywifi_dw33d SOC := qca9558 DEVICE_VENDOR := DomyWifi DEVICE_MODEL := DW33D DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \ kmod-ath10k-ct ath10k-firmware-qca988x-ct KERNEL_SIZE := 5120k IMAGE_SIZE := 98304k BLOCKSIZE := 128k PAGESIZE := 2048 UBINIZE_OPTS := -E 5 IMAGES += factory.bin IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size endef TARGET_DEVICES += domywifi_dw33d define Device/dongwon_dw02-412h SOC := qca9557 DEVICE_VENDOR := Dongwon T&I DEVICE_MODEL := DW02-412H DEVICE_ALT0_VENDOR := KT DEVICE_ALT0_MODEL := GiGA WiFi home DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct KERNEL_SIZE := 8192k BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL := $$(KERNEL) | dongwon-header KERNEL_INITRAMFS := $$(KERNEL) UBINIZE_OPTS := -E 5 IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef define Device/dongwon_dw02-412h-64m $(Device/dongwon_dw02-412h) DEVICE_VARIANT := (64M) DEVICE_ALT0_VARIANT := (64M) IMAGE_SIZE := 49152k endef TARGET_DEVICES += dongwon_dw02-412h-64m define Device/dongwon_dw02-412h-128m $(Device/dongwon_dw02-412h) DEVICE_VARIANT := (128M) DEVICE_ALT0_VARIANT := (128M) IMAGE_SIZE := 114688k endef TARGET_DEVICES += dongwon_dw02-412h-128m define Device/glinet_gl-ar300m-common-nand SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR300M DEVICE_PACKAGES := kmod-usb2 KERNEL_SIZE := 4096k IMAGE_SIZE := 16000k PAGESIZE := 2048 VID_HDR_OFFSET := 2048 endef define Device/glinet_gl-ar300m-nand $(Device/glinet_gl-ar300m-common-nand) DEVICE_VARIANT := NAND BLOCKSIZE := 128k IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata SUPPORTED_DEVICES += glinet,gl-ar300m-nor endef TARGET_DEVICES += glinet_gl-ar300m-nand define Device/glinet_gl-ar300m-nor $(Device/glinet_gl-ar300m-common-nand) DEVICE_VARIANT := NOR SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m endef TARGET_DEVICES += glinet_gl-ar300m-nor define Device/glinet_gl-ar750s-common SOC := qca9563 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR750S DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \ kmod-usb-storage block-mount IMAGE_SIZE := 16000k endef define Device/glinet_gl-ar750s-nor-nand $(Device/glinet_gl-ar750s-common) DEVICE_VARIANT := NOR/NAND KERNEL_SIZE := 4096k IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata SUPPORTED_DEVICES += glinet,gl-ar750s-nor endef TARGET_DEVICES += glinet_gl-ar750s-nor-nand define Device/glinet_gl-ar750s-nor $(Device/glinet_gl-ar750s-common) DEVICE_VARIANT := NOR SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand endef TARGET_DEVICES += glinet_gl-ar750s-nor define Device/glinet_gl-e750 SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-E750 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 SUPPORTED_DEVICES += gl-e750 KERNEL_SIZE := 4096k IMAGE_SIZE := 131072k PAGESIZE := 2048 VID_HDR_OFFSET := 2048 BLOCKSIZE := 128k IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += glinet_gl-e750 define Device/glinet_gl-xe300 SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-XE300 DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \ kmod-usb-net-qmi-wwan uqmi KERNEL_SIZE := 4096k IMAGE_SIZE := 131072k PAGESIZE := 2048 VID_HDR_OFFSET := 2048 BLOCKSIZE := 128k IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += glinet_gl-xe300 define Device/glinet_gl-x1200-common SOC := qca9563 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-X1200 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct-htt kmod-usb2 \ kmod-usb-storage block-mount kmod-usb-net-qmi-wwan uqmi IMAGE_SIZE := 16000k endef define Device/glinet_gl-x1200-nor-nand $(Device/glinet_gl-x1200-common) DEVICE_VARIANT := NOR/NAND KERNEL_SIZE := 4096k IMAGE_SIZE := 131072k PAGESIZE := 2048 VID_HDR_OFFSET := 2048 BLOCKSIZE := 128k IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += glinet_gl-x1200-nor-nand define Device/glinet_gl-x1200-nor $(Device/glinet_gl-x1200-common) DEVICE_VARIANT := NOR endef TARGET_DEVICES += glinet_gl-x1200-nor define Device/linksys_ea4500-v3 SOC := qca9558 DEVICE_VENDOR := Linksys DEVICE_MODEL := EA4500 DEVICE_VARIANT := v3 DEVICE_PACKAGES := kmod-usb2 BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_SIZE := 4096k IMAGE_SIZE := 81920k IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata LINKSYS_HWNAME := EA4500V3 IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME) UBINIZE_OPTS := -E 5 endef TARGET_DEVICES += linksys_ea4500-v3 # fake rootfs is mandatory, pad-offset 64 equals (1 * uimage_header) define Device/netgear_ath79_nand DEVICE_VENDOR := NETGEAR DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport KERNEL_SIZE := 4096k BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 25600k KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \ pad-offset $$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC) IMAGES := sysupgrade.bin factory.img IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | check-size | netgear-dni IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata UBINIZE_OPTS := -E 5 endef define Device/netgear_pgzng1 SOC := ar9344 DEVICE_MODEL := PGZNG1 DEVICE_VENDOR := NETGEAR DEVICE_ALT0_MODEL := Pulse Gateway DEVICE_ALT0_VENDOR := ADT DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio \ kmod-leds-pca955x kmod-rtc-isl1208 kmod-spi-dev KERNEL_SIZE := 5120k IMAGE_SIZE := 83968k PAGESIZE := 2048 BLOCKSIZE := 128k IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += netgear_pgzng1 define Device/netgear_r6100 SOC := ar9344 DEVICE_MODEL := R6100 UIMAGE_MAGIC := 0x36303030 NETGEAR_BOARD_ID := R6100 NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2 $(Device/netgear_ath79_nand) DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += netgear_r6100 define Device/netgear_wndr3700-v4 SOC := ar9344 DEVICE_MODEL := WNDR3700 DEVICE_VARIANT := v4 UIMAGE_MAGIC := 0x33373033 NETGEAR_BOARD_ID := WNDR3700v4 NETGEAR_HW_ID := 29763948+128+128 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr3700-v4 define Device/netgear_wndr4300 SOC := ar9344 DEVICE_MODEL := WNDR4300 UIMAGE_MAGIC := 0x33373033 NETGEAR_BOARD_ID := WNDR4300 NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4300 define Device/netgear_wndr4300sw SOC := ar9344 DEVICE_MODEL := WNDR4300SW UIMAGE_MAGIC := 0x33373033 NETGEAR_BOARD_ID := WNDR4300SW NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4300sw define Device/netgear_wndr4300tn SOC := ar9344 DEVICE_MODEL := WNDR4300TN UIMAGE_MAGIC := 0x33373033 NETGEAR_BOARD_ID := WNDR4300TN NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4300tn define Device/netgear_wndr4300-v2 SOC := qca9563 DEVICE_MODEL := WNDR4300 DEVICE_VARIANT := v2 UIMAGE_MAGIC := 0x27051956 NETGEAR_BOARD_ID := WNDR4500series NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4300-v2 define Device/netgear_wndr4500-v3 SOC := qca9563 DEVICE_MODEL := WNDR4500 DEVICE_VARIANT := v3 UIMAGE_MAGIC := 0x27051956 NETGEAR_BOARD_ID := WNDR4500series NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4500-v3 define Device/zte_mf28x_common SOC := qca9563 DEVICE_VENDOR := ZTE DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_SIZE := 4096k IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef define Device/zte_mf281 $(Device/zte_mf28x_common) DEVICE_MODEL := MF281 KERNEL_SIZE := 6144k IMAGE_SIZE := 29696k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \ kmod-usb-acm comgt-ncm endef TARGET_DEVICES += zte_mf281 define Device/zte_mf286 $(Device/zte_mf28x_common) DEVICE_MODEL := MF286 DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \ kmod-usb-serial-option uqmi endef TARGET_DEVICES += zte_mf286 define Device/zte_mf286a $(Device/zte_mf28x_common) DEVICE_MODEL := MF286A DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \ kmod-usb-serial-option uqmi endef TARGET_DEVICES += zte_mf286a define Device/zte_mf286r $(Device/zte_mf28x_common) DEVICE_MODEL := MF286R DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \ comgt-ncm endef TARGET_DEVICES += zte_mf286r define Device/zyxel_nbg6716 SOC := qca9558 DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NBG6716 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \ ath10k-firmware-qca988x-ct RAS_BOARD := NBG6716 RAS_ROOTFS_SIZE := 29696k RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)" KERNEL_SIZE := 4096k BLOCKSIZE := 128k PAGESIZE := 2048 LOADER_TYPE := bin KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \ zyxel-buildkerneljffs | check-size 4096k IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \ sysupgrade-tar rootfs=$$$$@ | append-metadata IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \ pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ zyxel-factory UBINIZE_OPTS := -E 5 endef TARGET_DEVICES += zyxel_nbg6716 define Device/zyxel_emg2926_q10a $(Device/zyxel_nbg6716) DEVICE_MODEL := EMG2926-Q10A RAS_BOARD := AAVK-EMG2926Q10A endef TARGET_DEVICES += zyxel_emg2926_q10a