// SPDX-License-Identifier: GPL-2.0-or-later #include "bcm6318.dtsi" / { model = "Comtrend AR-5315u"; compatible = "comtrend,ar-5315u", "brcm,bcm6318"; aliases { led-boot = &led_power_green; led-failsafe = &led_power_red; led-running = &led_power_green; led-upgrade = &led_power_green; }; keys { compatible = "gpio-keys-polled"; poll-interval = <100>; wps { label = "wps"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; reset { label = "reset"; gpios = <&gpio 33 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; }; bcm43217-sprom { compatible = "brcm,bcma-sprom"; pci-bus = <1>; pci-dev = <0>; nvmem-cells = <&macaddr_cfe_6a0 1>; nvmem-cell-names = "mac-address"; brcm,sprom = "brcm/bcm43217-sprom.bin"; brcm,sprom-fixups = <6 0x1c00>, <65 0x1255>, <97 0xfe55>, <98 0x171d>, <99 0xfa42>, <113 0xfeb7>, <114 0x18cd>, <115 0xfa4f>, <162 0x6444>, <170 0x6444>, <172 0x6444>; }; }; &ehci { status = "okay"; }; ðernet { status = "okay"; nvmem-cells = <&macaddr_cfe_6a0 0>; nvmem-cell-names = "mac-address"; }; &hsspi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <62500000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; reg = <0>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { reg = <0x000000 0x010000>; label = "cfe"; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_cfe_6a0: macaddr@6a0 { compatible = "mac-base"; reg = <0x6a0 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@10000 { compatible = "brcm,bcm963xx-imagetag"; reg = <0x010000 0xfe0000>; label = "firmware"; }; partition@ff0000 { reg = <0xff0000 0x010000>; label = "nvram"; }; }; }; }; &leds { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds &pinctrl_ephy0_act_led &pinctrl_ephy1_act_led &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; led@0 { reg = <0>; active-low; function = LED_FUNCTION_WPS; color = ; }; led_power_green: led@1 { reg = <1>; active-low; function = LED_FUNCTION_POWER; color = ; }; led@2 { reg = <2>; active-low; function = LED_FUNCTION_USB; color = ; }; led@4 { /* EPHY0 Act */ reg = <4>; brcm,hardware-controlled; brcm,link-signal-sources = <4>; }; led@5 { /* EPHY1 Act */ reg = <5>; brcm,hardware-controlled; brcm,link-signal-sources = <5>; }; led@6 { /* EPHY2 Act */ reg = <6>; brcm,hardware-controlled; brcm,link-signal-sources = <6>; }; led@7 { /* EPHY3 Act */ reg = <7>; brcm,hardware-controlled; brcm,link-signal-sources = <7>; }; led@8 { reg = <8>; active-low; label = "green:internet"; }; led@9 { reg = <9>; active-low; label = "red:internet"; }; led@10 { reg = <10>; active-low; label = "green:dsl"; }; led_power_red: led@11 { reg = <11>; active-low; function = LED_FUNCTION_POWER; color = ; panic-indicator; }; }; &ohci { status = "okay"; }; &pcie { status = "okay"; }; &pinctrl { pinctrl_leds: leds { function = "led"; pins = "gpio0", "gpio1", "gpio2", "gpio8", "gpio9", "gpio10", "gpio11"; }; }; &switch0 { ports { port@0 { reg = <0>; label = "lan4"; phy-handle = <&phy1>; phy-mode = "mii"; }; port@1 { reg = <1>; label = "lan3"; phy-handle = <&phy2>; phy-mode = "mii"; }; port@2 { reg = <2>; label = "lan2"; phy-handle = <&phy3>; phy-mode = "mii"; }; port@3 { reg = <3>; label = "lan1"; phy-handle = <&phy4>; phy-mode = "mii"; }; }; }; &uart0 { status = "okay"; }; &usbh { status = "okay"; };