Commit Graph

30 Commits

Author SHA1 Message Date
Alberto Bursi f013cc4b26 uboot-mvebu: add uboot for helios 4
add u-boot for Helios 4 NAS

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
2020-07-17 11:00:33 +02:00
Jakov Petrina b1cfbff0a7 mvebu: uDPU: switch default kernel and U-Boot PHY mode
Certain SFP modules (most notably Nokia GPON ones) first check
connectivity on 1000base-x, and switch to 2500base-x afterwards. This
is considered a quirk so the phylink switches the interface to
2500base-x as well.

However, after power-cycling the uDPU device, network interface/SFP module
will not work correctly until the module is re-seated. This patch
resolves this issue by forcing the interface to be brought up in
2500base-x mode by default.

Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-05-09 14:34:23 +02:00
Tomasz Maciej Nowak af878339ae uboot-mvebu: point to UBOOT_CONFIG when setting options
The BUILD_VARIANT might differ from UBOOT_CONFIG, so point to a file we
are actually changing. Being here let's call 'Build/Configure/U-Boot'
definition, instead of definig the same command. This'll be more future
proof, if U-Boot configuration procedure will change.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-03-01 21:36:00 +01:00
Vladimir Vid e7a96acf1b uboot-mvebu: add uDPU board
* add u-boot support for uDPU
* add line to copy u-boot binary to STAGING_DIR_IMAGE, this can later be used
as BL33 variable required for ATF build
* add patch to increase max gunzip size in mvebu_armada-37xx.h which is
required for booting the itb recovery images

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-11-21 07:32:41 +01:00
Vladimir Vid b2fdfe0727 uboot-mvebu: add support for Macronix mx25u12835f flash
Some of A3700 boards use mx25u12835f, specifically uDPU and ESPRESSObin v7.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-11-01 21:19:40 +01:00
Vladimir Vid 026714613d u-boot-mvebu: bump to 2019.04
Some devices and packages require newer version of u-boot to work
properly, update u-boot to keep up with 4.19 kernel.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
[re-added missing commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-28 21:43:27 +02:00
Tomasz Maciej Nowak a39d2a8053 mvebu: align device names to vendor_device format
Add vendors in device names and also rename few device names, for easier
identyfying potential firmware to flash. The vendor and device string is
mainly derived from model/compatipble string in dts from particular
device, but since not all devices are well described, some of the renames
follow marketing names.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-05-11 23:11:04 +02:00
Jo-Philipp Wich 01c2ce3c7d uboot-mvebu: fix build on hosts lacking pkg-config
The uboot-mvebu package incorrectly used the host pkg-config for the tool
build parts, which broke the build on systems lacking pkg-config and only
worked by accident on those that have it installed.

Export the host-build specific environment variables for the uboot build
to redirect pkg-config invocations to our staged host build pkg-config in
buildroot.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-23 09:05:55 +02:00
Hauke Mehrtens 9bfca30826 uboot-mvebu: Fix build with libressl 2.7.2
When libressl was linked the libpthread was missing, add it in addition.

Fixes: 2c192b6916 ("tools/libressl: update to version 2.7.2")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-29 10:13:14 +02:00
Josua Mayer dff904a955 u-boot-mvebu: update to 2018.03
This release brings various improvements to clearfog support, such as distro-boot.
Obsoletes:
0002-clearfog-reset-usom-onboard-1512-phy.patch
0003-clearfog-enable-distro-boot-code.patch

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2018-03-31 16:12:40 +02:00
Josua Mayer 0a3e07b2f5 u-boot-mvebu: set configuration options in Makefile
CONFIG_* variables can easily be set by overriding Build/Configure.
so set NET_RANDOM_ETHADDR=y and CMD_SETEXPR=y here.

This replaces the following patches:
0001-clearfog-generate-random-MAC-address.patch
0004-clearfog-enable-setexpr-command-by-default.patch

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2018-03-31 16:12:39 +02:00
Hauke Mehrtens be3da900cd mvebu: Add subtarget for Cortex A9 build
This is in preparation for adding a subtarget for the Cortex A53 later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-10 01:15:21 +01:00
Alexandru Ardelean a6f79f5e5e uboot-mvebu: fix build ; use the build's tools/libressl
Since I have no openssl-dev on my machine, I first
get this error:

```
tools/kwbimage.c:21:10: fatal error: openssl/bn.h: No such file or directory
 #include <openssl/bn.h>
```

After removing the UBOOT_MAKE_FLAGS the next error is:
```
tools/kwbimage.c:40:6: error: conflicting types for ‘EVP_MD_CTX_cleanup’
 void EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx)
```

After removing the OpenSSL patches the next error is:
```
  HOSTLD  tools/dumpimage
/usr/bin/ld: cannot find -lssl
/usr/bin/ld: cannot find -lcrypto
collect2: error: ld returned 1 exit status
scripts/Makefile.host:108: recipe for target 'tools/dumpimage' failed
make[5]: *** [tools/dumpimage] Error 1

```

So, the final part is to add the build system's
HOST_LDFLAGS to the UBOOT_MAKE_FLAGS.
(which was done in the previous commit)

Then the image builds.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2018-02-10 20:52:31 +01:00
Marko Ratkaj 56348c95e9 uboot-mvebu: add OpenSSL compat patches
Fixes the following build issue: "undefined reference to `EVP_MD_CTX_create'"

From: Jelle van der Waa <jelle@vdwaa.nl>

The rsa_st struct has been made opaque in 1.1.x, add forward compatible
code to access the n, e, d members of rsa_struct.

EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be
called to reinitialise an already created structure.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:33 +02:00
Marko Ratkaj 49e6e9ca39 uboot-mvebu: fix SETEXPR redefinition warning
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:32 +02:00
Marko Ratkaj ad0e107c23 uboot-mvebu: add missing UBOOT_MAKE_FLAGS variable
This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 22:38:29 +02:00
Josua Mayer e2814f6416 u-boot-mvebu: clearfog: enable setexpr command
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer c4f9474059 u-boot-mvebu: clearfog: implement distro-boot
Add a patchfile that implements distro-boot and is meant to go upstream
Also make the other patches git-am'able for easier maintenance.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer 86c4144571 u-boot-mvebu: update to 2017.03
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Marko Ratkaj ee1cee2cac mvebu: add ClearFog Base support
Add support for SolidRun ClearFog Base board.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj ec4a8c6dee mvebu: ClearFog renamed upstream to ClearFog Pro
The conventional model is now known as the "Clearfog Pro"

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Jo-Philipp Wich 237bd36135 mvebu: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing u-boot images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Felix Fietkau 366c33962c uboot-mvebu: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau d4ce3e8692 uboot-mvebu: enable loader with the default profile
Fixes build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 18:39:44 +01:00
Felix Fietkau 720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Jonas Gorski c4823622d8 uboot-mvebu: reset the 88E1512 PHY to make the wan port work
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:03:18 +02:00
Jonas Gorski d8075b15d0 uboot-mvebu: make hidden and be m for clearfog to fix IB failing to add it
Uboot-mvebu isn't a real package, which will break the image builder
when it tries to install it during the packing step. Instead of cleafog
selecting it through its default packages, make it default to m if the
clearfog profile is selected.

This will ensure it is always build, but never added to the rootfs. This
fixes creating images for clearfog with IB.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:48:18 +02:00
Jonas Gorski bc1f006b4e uboot-mvebu: also install into KDIR to ensure it packaged in IB
The clearfog image requires u-boot, so package it into KDIR to make sure
it is available in imageBuilder.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:47:36 +02:00
Felix Fietkau 7130833a27 mvebu: fix boot script for booting from mmc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:53 +02:00
Luka Perkov d1aa4bfe1d uboot-mvebu: add package
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>

SVN-Revision: 49088
2016-03-25 12:07:03 +00:00