Gabor Juhos
7afab49bc7
RB153 CF driver fixes
...
SVN-Revision: 9708
2007-12-11 16:46:55 +00:00
Gabor Juhos
bb6c1aa770
new experimental driver for the CF slot on the RouterBOARD 153
...
SVN-Revision: 9707
2007-12-11 09:00:06 +00:00
Florian Fainelli
71f1ca2cba
Replace deprecated DEBUG config symbol
...
SVN-Revision: 9706
2007-12-11 08:30:48 +00:00
John Crispin
6e2b3bc158
added CONFIG_DANUBE_PCI_HW_SWAP
...
SVN-Revision: 9705
2007-12-10 20:26:15 +00:00
John Crispin
f02869b17a
initial merge of danube, pci is still broken and the new dma code still needs to be tested, before the merge
...
SVN-Revision: 9704
2007-12-10 20:00:55 +00:00
Gabor Juhos
9b9b83976c
add support for GPIO IRQs
...
SVN-Revision: 9700
2007-12-10 14:05:01 +00:00
Florian Fainelli
cf1c2554e7
Enable SSB ohci driver ( #2828 )
...
SVN-Revision: 9699
2007-12-10 10:14:53 +00:00
Florian Fainelli
0d88baa016
Disable CONFIG_NETDEVICES_MULTIQUEUE for ar7 until we fix the race condition
...
SVN-Revision: 9698
2007-12-10 09:56:44 +00:00
Felix Fietkau
93575b53a7
Use $(CP) instead of $(INSTALL_BIN) for binaries.
...
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net>
SVN-Revision: 9694
2007-12-09 18:53:06 +00:00
Felix Fietkau
882f3e78ca
suppress bug after compiling last package in kamikaze SDK.
...
This patch corrects https://dev.openwrt.org/ticket/2508
An error was raised when no Config.in file was found in package/
Signed-off-by: Julien Pinon <julien.pinon@luceor.com>
SVN-Revision: 9692
2007-12-09 18:52:52 +00:00
Florian Fainelli
a86b7992f9
Forgot removing that file while applying patch from #2757
...
SVN-Revision: 9690
2007-12-09 17:52:27 +00:00
Florian Fainelli
17bd097fcc
Add bcm5354 patches from #2757
...
SVN-Revision: 9685
2007-12-09 16:11:52 +00:00
Florian Fainelli
dc36fccfdc
Add bcm5354 patch from #2754
...
SVN-Revision: 9684
2007-12-09 15:51:45 +00:00
Florian Fainelli
ab883d42a1
Fix missing return
...
SVN-Revision: 9683
2007-12-09 15:15:32 +00:00
Florian Fainelli
d37e090fe9
Setup MAC addresses for routerboards
...
SVN-Revision: 9682
2007-12-09 14:43:42 +00:00
Tim Yardley
2efb83ebcb
bump kernel to 2.6.23.9 for x86
...
SVN-Revision: 9675
2007-12-08 15:53:05 +00:00
Tim Yardley
59a715fdd5
updated layer7 to 2.15.. current is 2.16.1, i might bump again, this has been uncommitted for a bit
...
SVN-Revision: 9674
2007-12-08 15:52:26 +00:00
Rod Whitby
06b6aaae20
ixp4xx: Rename fsg3 subtarget to harddisk to better reflect the intention of the subtarget
...
SVN-Revision: 9670
2007-12-07 22:30:56 +00:00
Rod Whitby
610fcbfd85
ixp4xx: Split into two subtargets, one normal and one for boards which boot directly from attached storage (and therefore need most kernel modules compiled in)
...
SVN-Revision: 9669
2007-12-07 22:29:44 +00:00
Felix Fietkau
691be1ebe3
add missing kernel config symbol
...
SVN-Revision: 9668
2007-12-07 19:24:16 +00:00
Felix Fietkau
eeebde136d
Minor patch to the AR7 diag.sh to make the status LED a bit more useful. From the patch:
...
This setup gives us 3.5 distinguishable states:
- Solid OFF: Bootloader running, or kernel hung (timer task stalled)
- Solid ON: Kernel hung (timer task stalled)
- 5Hz blink: preinit
- Heartbeat: normal operation
Signed-off-by: oliver@opencloud.com
SVN-Revision: 9666
2007-12-07 00:03:14 +00:00
Felix Fietkau
f648fc7bc0
Reimplement rx ring with EOQ markers to avoid reset storms
...
Signed-off-by: oliver@opencloud.com
SVN-Revision: 9665
2007-12-07 00:03:10 +00:00
Felix Fietkau
6111ac6f94
Fix race between device reset and start_xmit
...
Signed-off-by: oliver@opencloud.com
SVN-Revision: 9664
2007-12-07 00:03:06 +00:00
Gabor Juhos
5a9fed951a
add copyright header to the USB driver's files
...
SVN-Revision: 9657
2007-12-05 09:32:04 +00:00
Felix Fietkau
5dc134c542
Fix VLYNQ device enable for DG834Gv1
...
This patch allows VLYNQ devices on the DG834Gv1 to be successfully
enabled.
Currently the "__vlynq_enable_device" function attempts to set the VLYNQ
device clock divisor to values from 1 through 8 until a link is
successfully established. On the DG834Gv1 (but not the DG834Gv2),
setting the VLYNQ device clock divisor to 1 (full rate) results in all
further VLYNQ operations failing (including software reset), so the
device is never enabled. This patches changes the function to only
attempt divisors 2 through 8, and hence the device is successfully
enabled.
Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com>
---------
SVN-Revision: 9656
2007-12-04 12:49:54 +00:00
Gabor Juhos
bb44c9a6de
switch to 2.6.23.9
...
SVN-Revision: 9629
2007-11-29 08:51:59 +00:00
Travis Kemen
38101a0cdc
add support for the PCEngines Alix
...
SVN-Revision: 9611
2007-11-28 04:07:24 +00:00
Travis Kemen
be9bf2bf40
add txpower patches and add uci configuration file From: Vasilis T. (aka Acinonyx)
...
SVN-Revision: 9610
2007-11-28 03:44:18 +00:00
Felix Fietkau
0795035b35
ps3: use readable video mode descriptions in readme
...
The ps3 video modes can be specified as readable names (eg "720p"), so
use those instead.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9605
2007-11-28 02:36:06 +00:00
Felix Fietkau
c690518fea
ps3: build-in ps3 system manager
...
This changes the ps3 kernel config to build-in the System Manager
module, which is required for proper shutdown and reboot.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9604
2007-11-28 02:36:03 +00:00
Gabor Juhos
3faf84682b
add Edimax BR-61x4WG board support to the LED driver, thanks to scream_ ( closes : #2756 )
...
SVN-Revision: 9600
2007-11-26 19:02:12 +00:00
Gabor Juhos
717ff24d47
more USB driver fixes, now it passes usbtests 1-14
...
SVN-Revision: 9599
2007-11-26 08:49:58 +00:00
Felix Fietkau
679089c6a8
work around kernel config issues with sound modules
...
SVN-Revision: 9598
2007-11-25 17:15:30 +00:00
Gabor Juhos
4263fdd731
fix USB driver to compile with ADMH_VERBOSE_DEBUG defined
...
SVN-Revision: 9593
2007-11-23 18:11:49 +00:00
Gabor Juhos
5a1a5dcf58
USB driver updates, the driver passes usbtests 1-10 now
...
SVN-Revision: 9592
2007-11-23 15:53:35 +00:00
Gabor Juhos
60898bc0c5
disable INITRAMFS_EXTRA_FILES, in initramfs it cause errors
...
SVN-Revision: 9591
2007-11-23 14:58:55 +00:00
Florian Fainelli
84b2bcb5be
Fix build on non-SMP machines of the remote GDB debugging ( #2666 )
...
SVN-Revision: 9571
2007-11-16 07:39:48 +00:00
Florian Fainelli
edea76ab77
Fix tx stats ( #2705 )
...
SVN-Revision: 9570
2007-11-16 07:31:28 +00:00
Felix Fietkau
6874422e54
fix wl-700gE ide init (patch by biblbroks, fixes #2686 )
...
SVN-Revision: 9560
2007-11-16 03:11:30 +00:00
Felix Fietkau
1a92f058ca
add lzma compressed initramfs for bcm947xx
...
SVN-Revision: 9559
2007-11-16 03:11:27 +00:00
Felix Fietkau
ba85de21e9
add missing config symbols for ide on broadcom 4780
...
SVN-Revision: 9558
2007-11-16 03:11:24 +00:00
Felix Fietkau
6954e434f9
fix initramfs images
...
SVN-Revision: 9557
2007-11-16 03:11:21 +00:00
Felix Fietkau
bf0dd24627
create broadcom initramfs images and move the lzma decompressor area a bit further
...
SVN-Revision: 9556
2007-11-16 03:11:17 +00:00
Gabor Juhos
ba82fbff75
more USB driver changes
...
SVN-Revision: 9550
2007-11-15 09:16:47 +00:00
Felix Fietkau
dfa7618bd6
fix the image builder
...
SVN-Revision: 9549
2007-11-14 23:11:07 +00:00
Florian Fainelli
72f30a2ea0
Add bcm5354 fixes from #2611
...
SVN-Revision: 9547
2007-11-13 07:38:39 +00:00
Gabor Juhos
3e64dbb862
make build of the images a bit quiet
...
SVN-Revision: 9544
2007-11-12 15:19:41 +00:00
Gabor Juhos
c80fbd4dc9
USB driver cleanups, no it is still not finished
...
SVN-Revision: 9543
2007-11-12 13:55:06 +00:00
Gabor Juhos
2e0b2d53d7
fix an unbalanced spinlock issue
...
SVN-Revision: 9540
2007-11-11 17:56:32 +00:00
Felix Fietkau
1eb35dd1c8
add b43 fixes from #2677
...
SVN-Revision: 9535
2007-11-11 11:44:59 +00:00