Some new targets were added, but we did not add them to the labeler.
Add them now.
Link: https://github.com/openwrt/openwrt/pull/16454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Version 5 of this action updated the runtime to Node.js 20.
All scripts are now run with Node.js 20 instead of Node.js 16
and are affected by any breaking changes between Node.js 16 and 20.
* adapt the labeler configuration to the new format
Follow-up to #16251 this was reverted with b870c16534
Link: https://github.com/openwrt/openwrt/pull/16451
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16451
Signed-off-by: Robert Marko <robimarko@gmail.com>
* Version 5 of this action updated the runtime to Node.js 20. All scripts are now run with Node.js 20 instead of Node.js 16 and are affected by any breaking changes between Node.js 16 and 20.
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16251
Signed-off-by: Robert Marko <robimarko@gmail.com>
octeontx is currently stuck on kernel 5.15 since using 6.1 breaks booting,
and unfortunately nobody has stepped up to fix this issue.
Gateworks who were primary users have supported the removal.
Link: https://github.com/openwrt/openwrt/pull/15686
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is needed to boot the BCM6238-based Inteno XG6846.
Currently this is restricted to the XG6846 board.
Reviewed-by: Paul Donald <newtwen+github@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Upstream Linux community has discontinued support for the target.
Maintaining support for it downstream would require too much effort.
Moreover, it seems that the supported hardware is no longer deemed worthy
of it.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add labels to bug-report issue to better identify type.
Also introduce label to-triage to better handle issue by CI actions.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Blank issue might be used by devs to create tracking issue or by
advanced user to report more strange issue.
These kind of issue won't be parsed and won't be tagged. Normally bBug
report should be used for 99% of the cases.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ath25 has been on life support for the last couple of releases, eventually
leading to marking it as source-only in 2023.
It has been basically only touched to do a kernel bump so that we can make
the new OpenWrt release which was a challenge due to small RAM amount.
However, with the attempt of kernel 6.1 update it turns out that kernel
cannot even finish booting due to RAM constraints, so its time to let this
target go.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use shared workflow in actions-shared-workflows instead of keeping the
workflow in openwrt main branch to make it easier to maintain and update
without bloating the main repository commit history.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add issue labeler action. This action will parse BUG issue from the
template and will make validation on the insert data.
The action will:
- Tag the issue with SNAPSHOT or release based on the provided release
- Tag the issue with the reported tag
- Tag the issue with the image kind (Official or Self Built)
- Validate the reported version exist
- Validate the reported release exist
- Validate the reported device exist
Will also tag the issue with useful tag or flag the issue as invalid.
Will also comment the issue with the invalid info provided.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add release info to BUG template. Having the reported release is an
additional info to better bisect the bug and what release is affected.
This is also useful in preparation for action that will parse BUG
template and add tag and do validations.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Implement a GitHub Actions workflow for automated project releases.
The workflow triggers on Git tags, ensuring that a GitHub release is
created whenever a new tag is pushed.
That new release is going to be created in draft and pre-release mode
and needs to be manually promoted to the proper release, once its
decided, that its good enough and prepared.
This is a start of a streamlined and consistent release process for
GitHub, reducing manual intervention.
Acked-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
I recently added support for the NorthStar ARM BCM53xx SoCs
to the upstream U-Boot. This is a back port on top of the
2023.04 version already imported to OpenWrt with the 5 necessary
upstream patches.
This is needed to create a small U-Boot for the BCM53xx-based
D-Link DIR-890L and I think also the DIR-885L, so that a
recent (bigger) kernel can be loaded and executed from the
SEAMA partitions on these devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Provide new required secret for S3 endpoint and bucket name to permit an
easier migration to new services.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop unused reusable workflow and dockerfiles now that we moved them to
a dedicated repository.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Migrate each workflow to use reusable workflow from dedicated repo to
skip pushing CI related commits to openwrt and better track versioning
of CI workflow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Currently, ipq807x only covers Qualcomm IPQ807x SoC-s.
However, Qualcomm also has IPQ60xx and IPQ50xx SoC-s under the AX WiSoC-s
and they share a lot of stuff with IPQ807x, especially IPQ60xx so to avoid
duplicating kernel patches and everything lets make a common target with
per SoC subtargets.
Start doing that by renaming ipq807x to qualcommax so that dependencies
on ipq807x target can be updated.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that we build also core packages, we need more host tools. Compile
all of them to reduce compile time on other actions.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support to label-kernel for compiling testing kernel version and
check patches. To trigger this special build appent :testing to the
normal label.
Example:
- ci:kernel:ipq806x:generic:testing
Test will fail if the requested target doesn't have a defined kernel
testing version.
Also add support for testing all target and subtarget. To trigger this
some special pattern are added:
- ci:kernel:all:all
Trigger test for all target and subtarget
- ci:kernel:all:first
Trigger test for all target and the first subtarget in alphabetical
order for the target.
With these special case :testing can also be used and every target and
subtarget that supports kernel testing version will be selected:
- ci:kernel:all:all:testing
Trigger test for all target and subtarget that have a kernel testing
version defined.
- ci:kernel:all:first:testing
Trigger test for all target and the first subtarget in alphabetical
order for the target that, if they have a kernel testing version
defined.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CDNs are known to ship outdated or corrupted files, if it unpacks
correctly, it necessarily doesn't mean, that we're using the desired
content. So lets fix it by checking the tarball as well.
I'm adding GPG checking explicitly, its not needed, but just double
checking, that everything is working as expected on build
infrastructure.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Its being used by buildbot workers, adds g++-multilib to fix node
cross-compilation from a 64-bit build machine to 32-bit host.
References: https://github.com/openwrt/buildbot/pull/7
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Add support for getting ccache cache from S3.
ccache is archieved in a tar and downloaded from S3 Cloud Storage.
For push events, ccache is then uplodaed back to S3 to refresh and have
a ccache cache always fresh.
An additional workflow is added to upload files to an S3 Cloud Storage
from artifacts uplodaed to github. The minio tool is used to upload
files to S3.
If the ccache can't be downloaded from s3, we fallback to github cache
system.
Also limit s3 upload to the openwrt repository since external fork won't
have (obviously) the required secrtes to upload data to the S3 Cloud
Storage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Limit ccache cache save/delete only on push events. Saving ccache
cache for pull request will result in bloat and refreshing ccache is not
possible due to security measure on enforcing read permission on
pull_request events.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CCache cache is currently broken due to a funny bug in ccache compiler
type detection. It seems ccache compiler type detection is very fragile
and with the use of external toolchain doesn't correctly detect the
type.
The type detected is set to other instead of gcc resulting in ccache
complaining for unsupported compiler options.
To handle this problem, force the compiler type to gcc to make ccache
correctly work and speedup compilation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add new input to define custom ccache cache type. This is useful to use
a different ccache cache for some special workflow that may do more test
than simple kernel compilation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add option to disable use of ccache. This can be useful for some
sensible test that should not use ccache as they can cause side effects
of any sort. (example Coverity Scan)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Github Actions cache doesn't permit to overwrite cache if it does
already exist. As a trick to refresh and have fresh ccache pool,
delete the ccache cache if it does exist with the help of Github REST
API. An additional permission is needed to access this API. Add this
permittion to each user of the build workflow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Split caching ccache in separate restore and save jobs to always refresh
the ccache across different runs. Currently if a key is restored, cache
is not saved resulting in a less useful ccache that benefits from
multiple runs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop redundant generare ccache hash job as that can be done by
integrated github expressions to generate an hash.
The only change is that the integrated way generate a sha256 hash
instead of an md5 sum.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Use toolchain container for label workflow to skip downloading external
toolchain from openwrt servers.
Fixes: 0fe5776f4a ("CI: build: Add support to use container included external toolchain")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Don't add "" in target and subtarget for label workflow from label
detection as it does cause problem in build workflow on container
target/subtarget matching.
Fixes: bf8187d5dc ("CI: use split target and subtarget in label workflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Commit 1cb8cdb ("ci: use new buildbot worker images with Debian 11")
introduced new Git version with strict rules for owner of the git
directory.
To handle this and not cause major change, just move the parsing before
the change of ownership of the openwrt directory permitting the correct
run of git fetch command with the same user that did the repository
checkout.
Fixes: 1cb8cdb ("ci: use new buildbot worker images with Debian 11")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Commit bf8187d5dc ("CI: use split target and subtarget in label
workflow") didn't correctly output subtarget resulting in calling with
an empty subtarget. Fix this and correctly output generated subtarget.
Fixes: bf8187d5dc ("CI: use split target and subtarget in label workflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
With eecc6e4811 ("CI: rework build workflow to have split target and
subtarget directly") target and subtarget are split in 2 different
variables. Label workflow were not aligned to this change and are
currently broken.
Fix them and correctly pass split target and subtarget.
Fixes: eecc6e4811 ("CI: rework build workflow to have split target and subtarget directly")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Due to problem with migrating from master to main as the default branch
and downstream project still requiring the master branch to be present,
we currently have for push events double CI runs, one for main and one
for master. To solve this ignore any push event to the master branch for
every workflow that react on push events.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support to use container included external toolchain and skip
redownloading external sdk for each test.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Hauke Mehrtens
Goetz Goerisch
Robert Marko
Linus Walleij
Nick Hainke
Christian Marangi
Paul Spooren
Petr Štetiar
Piotr Dymacz
Mathew McBride