mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-18 12:54:39 +00:00
ramips: add support for TP-Link Archer A6 v3
The patch adds support for the TP-Link Archer A6 v3
The router is sold in US and India with FCC ID TE7A6V3
Specification
-------------
MediaTek MT7621 SOC
RAM: 128MB DDR3
SPI Flash: W25Q128 (16MB)
Ethernet: MT7530 5x 1000Base-T
WiFi 5GHz: Mediatek MT7613BE
WiFi 2.4GHz: Mediatek MT7603E
UART/Serial: 115200 8n1
Device Configuration & Serial Port Pins
---------------------------------------
ETH Ports: LAN4 LAN3 LAN2 LAN1 WAN
_______________________
| |
Serial Pins: | VCC GND TXD RXD |
|_____________________|
LEDs: Power Wifi2G Wifi5G LAN WAN
Build Output
------------
The build will generate following set of files
[1] openwrt-ramips-mt7621-tplink_archer-a6-v3-initramfs-kernel.bin
[2] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-factory.bin
[3] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-sysupgrade.bin
How to Use - Flashing from TP-Link Web Interface
------------------------------------------------
* Go to "Advanced/System Tools/Firmware Update".
* Click "Browse" and upload the OpenWrt factory image: factory.bin[2]
* Click the "Upgrade" button, and select "Yes" when prompted.
TFTP Booting
------------
Setup a TFTP boot server with address 192.168.0.5.
While starting U-boot press '4' key to stop autoboot.
Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin
From u-boot command prompt run tftpboot followed by bootm.
Recovery
--------
Archer A6 V3 has recovery page activated if SPI booting from flash fails.
Recovery page can be activated from serial console only.
Press 'x' while u-boot is starting
Note: TFTP boot can be activated only from u-boot serial console.
Device recovery address: 192.168.0.1
Thanks to: Frankis for Randmon MAC address fix.
Signed-off-by: Vinay Patil <post2vinay@gmail.com>
[remove superfluous factory image definition, whitespacing]
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
Vinay Patil
David Bauer
parent
91abeebd3b
commit
f8f8935adb
188
target/linux/ramips/dts/mt7621_tplink_archer-a6-v3.dts
Normal file
188
target/linux/ramips/dts/mt7621_tplink_archer-a6-v3.dts
Normal file
@ -0,0 +1,188 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,archer-a6-v3", "mediatek,mt7621-soc";
|
||||
model = "TP-Link Archer A6 v3";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
label = "orange:wan";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "green:lan";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi5g {
|
||||
label = "green:wifi5g";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wifi2g {
|
||||
label = "green:wifi2g";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan_green {
|
||||
label = "green:wan";
|
||||
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "firmware";
|
||||
compatible = "denx,uimage";
|
||||
reg = <0x40000 0xf60000>;
|
||||
};
|
||||
|
||||
config: partition@fa0000 {
|
||||
label = "config";
|
||||
reg = <0xfa0000 0x50000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
radio: partition@ff0000 {
|
||||
label = "radio";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart2", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&radio 0x0>;
|
||||
mtd-mac-address = <&config 0x8>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&radio 0x8000>;
|
||||
mtd-mac-address = <&config 0x8>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
mtd-mac-address = <&config 0x8>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1132,6 +1132,19 @@ define Device/totolink_x5000r
|
||||
endef
|
||||
TARGET_DEVICES += totolink_x5000r
|
||||
|
||||
define Device/tplink_archer-a6-v3
|
||||
$(Device/dsa-migration)
|
||||
$(Device/tplink-safeloader)
|
||||
DEVICE_MODEL := Archer A6
|
||||
DEVICE_VARIANT := V3
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
|
||||
kmod-mt7663-firmware-ap kmod-mt7663-firmware-sta
|
||||
TPLINK_BOARD_ID := ARCHER-A6-V3
|
||||
KERNEL := $(KERNEL_DTB) | uImage lzma
|
||||
IMAGE_SIZE := 15744k
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-a6-v3
|
||||
|
||||
define Device/tplink_eap235-wall-v1
|
||||
$(Device/dsa-migration)
|
||||
$(Device/tplink-safeloader)
|
||||
|
||||
@ -78,6 +78,10 @@ netgear,r6800)
|
||||
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
|
||||
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
|
||||
;;
|
||||
tplink,archer-a6-v3)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
||||
;;
|
||||
tplink,re350-v1)
|
||||
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "blue:wifi2G" "wlan0"
|
||||
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "blue:wifi5G" "wlan1"
|
||||
|
||||
@ -1061,7 +1061,44 @@ static struct device_info boards[] = {
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
/** Firmware layout for the Archer A6 v3 */
|
||||
{
|
||||
.id = "ARCHER-A6-V3",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\n"
|
||||
"{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
|
||||
"{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
|
||||
.part_trail = 0x00,
|
||||
.soft_ver = "soft_ver:1.0.5\n",
|
||||
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x40000},
|
||||
{"firmware", 0x40000, 0xf60000},
|
||||
{"default-mac", 0xfa0000, 0x00200},
|
||||
{"pin", 0xfa0200, 0x00100},
|
||||
{"device-id", 0xfa0300, 0x00100},
|
||||
{"product-info", 0xfa0400, 0x0fc00},
|
||||
{"default-config", 0xfb0000, 0x08000},
|
||||
{"ap-def-config", 0xfb8000, 0x08000},
|
||||
{"user-config", 0xfc0000, 0x0a000},
|
||||
{"ag-config", 0xfca000, 0x04000},
|
||||
{"certificate", 0xfce000, 0x02000},
|
||||
{"ap-config", 0xfd0000, 0x06000},
|
||||
{"router-config", 0xfd6000, 0x06000},
|
||||
{"favicon", 0xfdc000, 0x02000},
|
||||
{"logo", 0xfde000, 0x02000},
|
||||
{"partition-table", 0xfe0000, 0x00800},
|
||||
{"soft-version", 0xfe0800, 0x00100},
|
||||
{"support-list", 0xfe0900, 0x00200},
|
||||
{"profile", 0xfe0b00, 0x03000},
|
||||
{"extra-para", 0xfe3b00, 0x00100},
|
||||
{"radio", 0xff0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
/** Firmware layout for the C60v1 */
|
||||
{
|
||||
.id = "ARCHER-C60-V1",
|
||||
@ -2826,7 +2863,8 @@ static void build_image(const char *output,
|
||||
parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof, file_system_partition);
|
||||
|
||||
/* Some devices need the extra-para partition to accept the firmware */
|
||||
if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 ||
|
||||
if (strcasecmp(info->id, "ARCHER-A6-V3") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-A7-V5") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-C2-V3") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-C7-V4") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-C7-V5") == 0 ||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user