diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 099aebcfa2..55fcec2661 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -118,7 +118,8 @@ domywifi,dw33d) glinet,gl-ar150) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000" ;; -huawei,ap5030dn) +huawei,ap5030dn|\ +huawei,ap6010dn) ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x20000" "0x20000" ;; netgear,wndr3700|\ diff --git a/target/linux/ath79/dts/ar9344_huawei_ap6010dn.dts b/target/linux/ath79/dts/ar9344_huawei_ap6010dn.dts new file mode 100644 index 0000000000..2f2e6e2331 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_huawei_ap6010dn.dts @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344.dtsi" + +#include +#include +#include + +/ { + model = "Huawei AP6010DN"; + compatible = "huawei,ap6010dn", "qca,ar9344"; + + chosen { + bootargs = "console=ttyS0,9600n8"; + }; + + aliases { + led-boot = &led_function_green; + led-failsafe = &led_function_red; + led-running = &led_function_green; + led-upgrade = &led_function_red; + label-mac-device = ð0; + }; + + leds { + compatible = "gpio-leds"; + + led_function_green: led-status-green { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + led_function_red: led-status-red { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + }; + + keys { + compatible = "gpio-keys"; + + restart { + label = "reset"; + linux,code = ; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&wdt_gpio15>; + + compatible = "linux,wdt-gpio"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + hw_algo = "toggle"; + hw_margin_ms = <100>; + always-running; + }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1e00000>; + compatible = "openwrt,uimage", "denx,uimage"; + }; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot-a"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "BootupA"; + reg = <0x80000 0x20000>; + }; + + partition@a0000 { + label = "BootupB"; + reg = <0xa0000 0x20000>; + }; + + partition@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + read-only; + }; + + partition@e0000 { + label = "BoardData"; + reg = <0xe0000 0x20000>; + read-only; + }; + + // In the vendor layout, there are the "SysImageA" (12 MiB) + // and the "ConfigA" (3 MiB) partitions here. + fwconcat0: partition@100000 { + label = "fwconcat0"; + reg = <0x100000 0xf00000>; + }; + + partition@1000000 { + label = "u-boot-b"; + reg = <0x1000000 0x80000>; + read-only; + }; + + partition@1080000 { + label = "ResultA"; + reg = <0x1080000 0x20000>; + read-only; + }; + + partition@10a0000 { + label = "ResultB"; + reg = <0x10a0000 0x20000>; + read-only; + }; + + // In the vendor layout, there are the "SysImageB" (12 MiB) + // and the "ConfigB" (3 MiB) partitions here. + fwconcat1: partition@10c0000 { + label = "fwconcat1"; + reg = <0x10c0000 0xf00000>; + }; + + art: partition@1fc0000 { + label = "art"; + reg = <0x1fc0000 0x40000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_2005b: macaddr@2005b { + compatible = "mac-base"; + reg = <0x2005b 0x6>; + #nvmem-cell-cells = <1>; + }; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + cal_art_5000: cal@5000 { + reg = <0x5000 0x844>; + }; + }; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&macaddr_art_2005b 1>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0 { + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + gpio-controller; + #gpio-cells = <2>; + + nvmem-cells = <&macaddr_art_2005b 2>, <&cal_art_5000>; + nvmem-cell-names = "mac-address", "calibration"; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_art_2005b 0>; + nvmem-cell-names = "mac-address"; + + pll-data = <0x06000000 0x04000101 0x0c001313>; + phy-mode = "rgmii-id"; + phy-handle = <&phy>; + + gmac-config { + device = <&gmac>; + rgmii-gmac0 = <1>; + rxdv-delay = <3>; + rxd-delay = <3>; + }; +}; + +&mdio0 { + status = "okay"; + + phy: ethernet-phy@18 { + reg = <0x4>; + }; +}; + +&pinmux { + wdt_gpio15: pinmux_wdt_gpio15 { + pinctrl-single,bits = <0xc 0x0 0xFF000000>; + }; +}; + +&wdt { + status = "disabled"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 7905d6e496..ccb296a62a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -52,6 +52,7 @@ ath79_setup_interfaces() glinet,gl-ar300m-lite|\ glinet,gl-usb150|\ hak5,wifi-pineapple-nano|\ + huawei,ap6010dn|\ meraki,mr16|\ netgear,ex7300|\ netgear,ex7300-v2|\ diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 076a785cbf..c61c48b00e 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -68,7 +68,8 @@ platform_do_upgrade() { ROOTFS_FILE="root.squashfs" platform_do_upgrade_failsafe_datachk "$1" ;; - huawei,ap5030dn) + huawei,ap5030dn|\ + huawei,ap6010dn) # Store beginning address of the "firmware" partition # as KernelA address and KernelB address, each to BootupA & BootupB # This is the address from which the bootloader will try to load the kernel. diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index f6dba8604d..00aa688156 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1806,6 +1806,21 @@ define Device/huawei_ap5030dn endef TARGET_DEVICES += huawei_ap5030dn +define Device/huawei_ap6010dn + SOC := ar9344 + DEVICE_VENDOR := Huawei + DEVICE_MODEL := AP6010DN + LOADER_TYPE := bin + LOADER_FLASH_OFFS := 0x111DC0 + KERNEL_SIZE := 15360k + IMAGE_SIZE := 30720k + COMPILE := loader-$(1).bin + COMPILE/loader-$(1).bin := loader-okli-compile | pad-to 64k | uImage none + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | uImage none +endef +TARGET_DEVICES += huawei_ap6010dn + define Device/iodata_etg3-r SOC := ar9342 DEVICE_VENDOR := I-O DATA diff --git a/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h b/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h index e7d7683973..9dc7c0f817 100644 --- a/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h +++ b/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h @@ -670,6 +670,7 @@ #define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) #define AR934X_GPIO_OUT_GPIO 0x00 +#define AR934X_GPIO_OUTSEL_CLK_OBS4 0x14 #define QCA955X_GPIO_OUTSEL_CLK_OBS5 0x54 diff --git a/target/linux/ath79/image/lzma-loader/src/board.c b/target/linux/ath79/image/lzma-loader/src/board.c index 13926e9b1e..04aa348b1f 100644 --- a/target/linux/ath79/image/lzma-loader/src/board.c +++ b/target/linux/ath79/image/lzma-loader/src/board.c @@ -182,34 +182,40 @@ static inline void mr18_init(void) static inline void mr18_init(void) { } #endif -#ifdef CONFIG_BOARD_HUAWEI_AP5030DN -static inline void ap5030dn_init(void) +#if defined(CONFIG_BOARD_HUAWEI_AP5030DN) || defined(CONFIG_BOARD_HUAWEI_AP6010DN) +static inline void huawei_ap_init(void) { - const unsigned int ap5030dn_watchdog_gpio = 15; + const unsigned int watchdog_gpio = 15; unsigned int gpiobase, reg; gpiobase = KSEG1ADDR(AR71XX_GPIO_BASE); - printf("Huawei AP5030DN\n"); + printf("Huawei AP\n"); reg = READREG(gpiobase + AR71XX_GPIO_REG_OE); WRITEREG(gpiobase + AR71XX_GPIO_REG_OE, - reg & ~(1 << ap5030dn_watchdog_gpio)); + reg & ~(1 << watchdog_gpio)); /* Set GPIO15 MUX to output CLK_OBS5 (= CPU_CLK/4) - * to keep the watchdog happy until wdt-gpio takes over + * or CLK_OBS4 (= AHB_CLK/2) to keep the watchdog happy + * until wdt-gpio takes over */ reg = READREG(gpiobase + AR934X_GPIO_REG_OUT_FUNC3); +#if defined(CONFIG_BOARD_HUAWEI_AP5030DN) WRITEREG(gpiobase + AR934X_GPIO_REG_OUT_FUNC3, reg | (QCA955X_GPIO_OUTSEL_CLK_OBS5 << 24)); +#else if defined(CONFIG_BOARD_HUAWEI_AP6010DN) + WRITEREG(gpiobase + AR934X_GPIO_REG_OUT_FUNC3, + reg | (AR934X_GPIO_OUTSEL_CLK_OBS4 << 24)); +#endif } #else -static inline void ap5030dn_init(void) { } +static inline void huawei_ap_init(void) {} #endif void board_init(void) { tlwr1043nd_init(); mr18_init(); - ap5030dn_init(); + huawei_ap_init(); }