mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-14 02:44:45 +00:00
bcm63xx: make smp kernels boot on older SoCs
Enhance BMIPS support so SMP kernels work on older chips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37099
This commit is contained in:
Jonas Gorski
parent
66f8f30f47
commit
e7d93889d7
@ -0,0 +1,67 @@
|
||||
From d55975b74389b2cf1a38732062ff89303940f6e1 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Sat, 29 Jun 2013 11:46:56 +0200
|
||||
Subject: [PATCH 01/10] MIPS: bmips: fix compilation for BMIPS5000
|
||||
|
||||
Replace the macro names in strings with actual macro invocation.
|
||||
|
||||
Fixes the following build error:
|
||||
|
||||
CC arch/mips/kernel/smp-bmips.o
|
||||
{standard input}: Assembler messages:
|
||||
{standard input}:951: Error: Unrecognized opcode `_ssnop'
|
||||
{standard input}:952: Error: Unrecognized opcode `_ssnop'
|
||||
(...)
|
||||
make[6]: *** [arch/mips/kernel/smp-bmips.o] Error 1
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/include/asm/bmips.h | 28 ++++++++++++++--------------
|
||||
1 file changed, 14 insertions(+), 14 deletions(-)
|
||||
|
||||
--- a/arch/mips/include/asm/bmips.h
|
||||
+++ b/arch/mips/include/asm/bmips.h
|
||||
@@ -70,15 +70,15 @@ static inline unsigned long bmips_read_z
|
||||
".set noreorder\n"
|
||||
"cache %1, 0(%2)\n"
|
||||
"sync\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
"mfc0 %0, $28, 3\n"
|
||||
- "_ssnop\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
".set pop\n"
|
||||
: "=&r" (ret)
|
||||
: "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset)
|
||||
@@ -92,13 +92,13 @@ static inline void bmips_write_zscm_reg(
|
||||
".set push\n"
|
||||
".set noreorder\n"
|
||||
"mtc0 %0, $28, 3\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
"cache %1, 0(%2)\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
- "_ssnop\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
+ __stringify(___ssnop) "\n"
|
||||
: /* no outputs */
|
||||
: "r" (data),
|
||||
"i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset)
|
||||
@ -0,0 +1,31 @@
|
||||
From 520f4bf75026cc60ba47946331966fb670b39cb0 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Thu, 27 Jun 2013 21:32:41 +0200
|
||||
Subject: [PATCH 02/10] MIPS: allow asm/cpu.h to be included from assembly
|
||||
|
||||
Add guards around the enum to allow including cpu.h from assembly.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/include/asm/cpu.h | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
--- a/arch/mips/include/asm/cpu.h
|
||||
+++ b/arch/mips/include/asm/cpu.h
|
||||
@@ -225,6 +225,8 @@
|
||||
|
||||
#define FPIR_IMP_NONE 0x0000
|
||||
|
||||
+#if !defined(__ASSEMBLY__)
|
||||
+
|
||||
enum cpu_type_enum {
|
||||
CPU_UNKNOWN,
|
||||
|
||||
@@ -277,6 +279,7 @@ enum cpu_type_enum {
|
||||
CPU_LAST
|
||||
};
|
||||
|
||||
+#endif /* !__ASSEMBLY */
|
||||
|
||||
/*
|
||||
* ISA Level encodings
|
||||
@ -0,0 +1,36 @@
|
||||
From 971b8b3d5101b3bb868e63f3eb96fe69b7110c61 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Thu, 27 Jun 2013 12:40:15 +0200
|
||||
Subject: [PATCH 03/10] MIPS: bmips: add macros for testing the current bmips
|
||||
CPU
|
||||
|
||||
Makes it easy to make code conditionally compiled for supported CPUs
|
||||
without directly relying on #ifdefs.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/include/asm/bmips.h | 11 +++++++++++
|
||||
1 file changed, 11 insertions(+)
|
||||
|
||||
--- a/arch/mips/include/asm/bmips.h
|
||||
+++ b/arch/mips/include/asm/bmips.h
|
||||
@@ -45,8 +45,19 @@
|
||||
#if !defined(__ASSEMBLY__)
|
||||
|
||||
#include <linux/cpumask.h>
|
||||
+#include <asm/cpu-features.h>
|
||||
#include <asm/r4kcache.h>
|
||||
|
||||
+#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
|
||||
+#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
|
||||
+ current_cpu_type() == CPU_BMIPS3300)
|
||||
+#define cpu_is_bmips4350() (IS_ENABLED(CONFIG_CPU_BMIPS4350) && \
|
||||
+ current_cpu_type() == CPU_BMIPS4350)
|
||||
+#define cpu_is_bmips4380() (IS_ENABLED(CONFIG_CPU_BMIPS4380) && \
|
||||
+ current_cpu_type() == CPU_BMIPS4380)
|
||||
+#define cpu_is_bmips5000() (IS_ENABLED(CONFIG_CPU_BMIPS5000) && \
|
||||
+ current_cpu_type() == CPU_BMIPS5000)
|
||||
+
|
||||
extern struct plat_smp_ops bmips_smp_ops;
|
||||
extern char bmips_reset_nmi_vec;
|
||||
extern char bmips_reset_nmi_vec_end;
|
||||
@ -0,0 +1,482 @@
|
||||
From 12594762fcbec024cb424c9b77efb28402651667 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Thu, 27 Jun 2013 21:33:56 +0200
|
||||
Subject: [PATCH 04/10] MIPS: bmips: change compile time checks to runtime
|
||||
checks
|
||||
|
||||
Allow building for all bmips cpus at the same time by changing ifdefs
|
||||
to checks for the cpu type, or adding appropriate checks to the
|
||||
assembly.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/kernel/bmips_vec.S | 55 +++++++---
|
||||
arch/mips/kernel/smp-bmips.c | 241 ++++++++++++++++++++++--------------------
|
||||
2 files changed, 172 insertions(+), 124 deletions(-)
|
||||
|
||||
--- a/arch/mips/kernel/bmips_vec.S
|
||||
+++ b/arch/mips/kernel/bmips_vec.S
|
||||
@@ -13,6 +13,7 @@
|
||||
#include <asm/asm.h>
|
||||
#include <asm/asmmacro.h>
|
||||
#include <asm/cacheops.h>
|
||||
+#include <asm/cpu.h>
|
||||
#include <asm/regdef.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/stackframe.h>
|
||||
@@ -89,12 +90,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
|
||||
beqz k0, bmips_smp_entry
|
||||
|
||||
#if defined(CONFIG_CPU_BMIPS5000)
|
||||
+ mfc0 k0, CP0_PRID
|
||||
+ li k1, PRID_IMP_BMIPS5000
|
||||
+ andi k0, 0xff00
|
||||
+ bne k0, k1, 1f
|
||||
+
|
||||
/* if we're not on core 0, this must be the SMP boot signal */
|
||||
li k1, (3 << 25)
|
||||
mfc0 k0, $22
|
||||
and k0, k1
|
||||
bnez k0, bmips_smp_entry
|
||||
-#endif
|
||||
+1:
|
||||
+#endif /* CONFIG_CPU_BMIPS5000 */
|
||||
#endif /* CONFIG_SMP */
|
||||
|
||||
/* nope, it's just a regular NMI */
|
||||
@@ -137,7 +144,12 @@ bmips_smp_entry:
|
||||
xori k0, 0x04
|
||||
mtc0 k0, CP0_CONFIG
|
||||
|
||||
+ mfc0 k0, CP0_PRID
|
||||
+ andi k0, 0xff00
|
||||
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
|
||||
+ li k1, PRID_IMP_BMIPS43XX
|
||||
+ bne k0, k1, 2f
|
||||
+
|
||||
/* initialize CPU1's local I-cache */
|
||||
li k0, 0x80000000
|
||||
li k1, 0x80010000
|
||||
@@ -148,14 +160,21 @@ bmips_smp_entry:
|
||||
1: cache Index_Store_Tag_I, 0(k0)
|
||||
addiu k0, 16
|
||||
bne k0, k1, 1b
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
+
|
||||
+ b 3f
|
||||
+2:
|
||||
+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
|
||||
+#if defined(CONFIG_CPU_BMIPS5000)
|
||||
/* set exception vector base */
|
||||
+ li k1, PRID_IMP_BMIPS5000
|
||||
+ bne k0, k1, 3f
|
||||
+
|
||||
la k0, ebase
|
||||
lw k0, 0(k0)
|
||||
mtc0 k0, $15, 1
|
||||
BARRIER
|
||||
-#endif
|
||||
-
|
||||
+#endif /* CONFIG_CPU_BMIPS5000 */
|
||||
+3:
|
||||
/* jump back to kseg0 in case we need to remap the kseg1 area */
|
||||
la k0, 1f
|
||||
jr k0
|
||||
@@ -221,8 +240,18 @@ END(bmips_smp_int_vec)
|
||||
LEAF(bmips_enable_xks01)
|
||||
|
||||
#if defined(CONFIG_XKS01)
|
||||
-
|
||||
+ mfc0 t0, CP0_PRID
|
||||
+ andi t2, t0, 0xff00
|
||||
#if defined(CONFIG_CPU_BMIPS4380)
|
||||
+ li t1, PRID_IMP_BMIPS43XX
|
||||
+ bne t2, t1, 1f
|
||||
+
|
||||
+ andi t0, 0xff
|
||||
+ addiu t1, t0, -PRID_REV_BMIPS4380_HI
|
||||
+ bgtz t1, 2f
|
||||
+ addiu t0, -PRID_REV_BMIPS4380_LO
|
||||
+ bltz t0, 2f
|
||||
+
|
||||
mfc0 t0, $22, 3
|
||||
li t1, 0x1ff0
|
||||
li t2, (1 << 12) | (1 << 9)
|
||||
@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01)
|
||||
or t0, t2
|
||||
mtc0 t0, $22, 3
|
||||
BARRIER
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
+ b 2f
|
||||
+1:
|
||||
+#endif /* CONFIG_CPU_BMIPS4380 */
|
||||
+#if defined(CONFIG_CPU_BMIPS5000)
|
||||
+ li t1, PRID_IMP_BMIPS5000
|
||||
+ bne t2, t1, 2f
|
||||
+
|
||||
mfc0 t0, $22, 5
|
||||
li t1, 0x01ff
|
||||
li t2, (1 << 8) | (1 << 5)
|
||||
@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01)
|
||||
or t0, t2
|
||||
mtc0 t0, $22, 5
|
||||
BARRIER
|
||||
-#else
|
||||
-
|
||||
-#error Missing XKS01 setup
|
||||
-
|
||||
-#endif
|
||||
-
|
||||
+#endif /* CONFIG_CPU_BMIPS5000 */
|
||||
+2:
|
||||
#endif /* defined(CONFIG_XKS01) */
|
||||
|
||||
jr ra
|
||||
--- a/arch/mips/kernel/smp-bmips.c
|
||||
+++ b/arch/mips/kernel/smp-bmips.c
|
||||
@@ -49,8 +49,11 @@ cpumask_t bmips_booted_mask;
|
||||
unsigned long bmips_smp_boot_sp;
|
||||
unsigned long bmips_smp_boot_gp;
|
||||
|
||||
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
|
||||
+static void bmips5000_send_ipi_single(int cpu, unsigned int action);
|
||||
static void bmips_send_ipi_single(int cpu, unsigned int action);
|
||||
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
|
||||
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
|
||||
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
|
||||
|
||||
/* SW interrupts 0,1 are used for interprocessor signaling */
|
||||
#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
|
||||
@@ -65,48 +68,49 @@ static void __init bmips_smp_setup(void)
|
||||
{
|
||||
int i, cpu = 1, boot_cpu = 0;
|
||||
|
||||
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
|
||||
- /* arbitration priority */
|
||||
- clear_c0_brcm_cmt_ctrl(0x30);
|
||||
-
|
||||
- /* NBK and weak order flags */
|
||||
- set_c0_brcm_config_0(0x30000);
|
||||
-
|
||||
- /* Find out if we are running on TP0 or TP1 */
|
||||
- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
|
||||
-
|
||||
- /*
|
||||
- * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
|
||||
- * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
|
||||
- * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
|
||||
- *
|
||||
- * If booting from TP1, leave the existing CMT interrupt routing
|
||||
- * such that TP0 responds to SW1 and TP1 responds to SW0.
|
||||
- */
|
||||
- if (boot_cpu == 0)
|
||||
- change_c0_brcm_cmt_intr(0xf8018000,
|
||||
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
|
||||
+ /* arbitration priority */
|
||||
+ clear_c0_brcm_cmt_ctrl(0x30);
|
||||
+
|
||||
+ /* NBK and weak order flags */
|
||||
+ set_c0_brcm_config_0(0x30000);
|
||||
+
|
||||
+ /* Find out if we are running on TP0 or TP1 */
|
||||
+ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
|
||||
+
|
||||
+ /*
|
||||
+ * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
|
||||
+ * thread
|
||||
+ * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
|
||||
+ * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
|
||||
+ *
|
||||
+ * If booting from TP1, leave the existing CMT interrupt routing
|
||||
+ * such that TP0 responds to SW1 and TP1 responds to SW0.
|
||||
+ */
|
||||
+ if (boot_cpu == 0)
|
||||
+ change_c0_brcm_cmt_intr(0xf8018000,
|
||||
(0x02 << 27) | (0x03 << 15));
|
||||
- else
|
||||
- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
|
||||
-
|
||||
- /* single core, 2 threads (2 pipelines) */
|
||||
- max_cpus = 2;
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
- /* enable raceless SW interrupts */
|
||||
- set_c0_brcm_config(0x03 << 22);
|
||||
-
|
||||
- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
|
||||
- change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
|
||||
+ else
|
||||
+ change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
|
||||
|
||||
- /* N cores, 2 threads per core */
|
||||
- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
|
||||
-
|
||||
- /* clear any pending SW interrupts */
|
||||
- for (i = 0; i < max_cpus; i++) {
|
||||
- write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
|
||||
- write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
|
||||
+ /* single core, 2 threads (2 pipelines) */
|
||||
+ max_cpus = 2;
|
||||
+ } else if (cpu_is_bmips5000()) {
|
||||
+ /* enable raceless SW interrupts */
|
||||
+ set_c0_brcm_config(0x03 << 22);
|
||||
+
|
||||
+ /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
|
||||
+ change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
|
||||
+
|
||||
+ /* N cores, 2 threads per core */
|
||||
+ max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
|
||||
+
|
||||
+ /* clear any pending SW interrupts */
|
||||
+ for (i = 0; i < max_cpus; i++) {
|
||||
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
|
||||
+ write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
|
||||
+ }
|
||||
}
|
||||
-#endif
|
||||
|
||||
if (!bmips_smp_enabled)
|
||||
max_cpus = 1;
|
||||
@@ -134,6 +138,15 @@ static void __init bmips_smp_setup(void)
|
||||
*/
|
||||
static void bmips_prepare_cpus(unsigned int max_cpus)
|
||||
{
|
||||
+ irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
|
||||
+
|
||||
+ if (cpu_is_bmips4350() || cpu_is_bmips4380())
|
||||
+ bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
|
||||
+ else if (cpu_is_bmips5000())
|
||||
+ bmips_ipi_interrupt = bmips5000_ipi_interrupt;
|
||||
+ else
|
||||
+ return;
|
||||
+
|
||||
if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
|
||||
"smp_ipi0", NULL))
|
||||
panic("Can't request IPI0 interrupt\n");
|
||||
@@ -168,26 +181,26 @@ static void bmips_boot_secondary(int cpu
|
||||
|
||||
pr_info("SMP: Booting CPU%d...\n", cpu);
|
||||
|
||||
- if (cpumask_test_cpu(cpu, &bmips_booted_mask))
|
||||
+ if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
|
||||
bmips_send_ipi_single(cpu, 0);
|
||||
- else {
|
||||
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
|
||||
- /* Reset slave TP1 if booting from TP0 */
|
||||
- if (cpu_logical_map(cpu) == 0)
|
||||
- set_c0_brcm_cmt_ctrl(0x01);
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
- if (cpu & 0x01)
|
||||
- write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
|
||||
- else {
|
||||
- /*
|
||||
- * core N thread 0 was already booted; just
|
||||
- * pulse the NMI line
|
||||
- */
|
||||
- bmips_write_zscm_reg(0x210, 0xc0000000);
|
||||
- udelay(10);
|
||||
- bmips_write_zscm_reg(0x210, 0x00);
|
||||
+ } else {
|
||||
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
|
||||
+ /* Reset slave TP1 if booting from TP0 */
|
||||
+ if (cpu_logical_map(cpu) == 0)
|
||||
+ set_c0_brcm_cmt_ctrl(0x01);
|
||||
+ } else if (cpu_is_bmips5000()) {
|
||||
+ if (cpu & 0x01)
|
||||
+ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
|
||||
+ else {
|
||||
+ /*
|
||||
+ * core N thread 0 was already booted; just
|
||||
+ * pulse the NMI line
|
||||
+ */
|
||||
+ bmips_write_zscm_reg(0x210, 0xc0000000);
|
||||
+ udelay(10);
|
||||
+ bmips_write_zscm_reg(0x210, 0x00);
|
||||
+ }
|
||||
}
|
||||
-#endif
|
||||
cpumask_set_cpu(cpu, &bmips_booted_mask);
|
||||
}
|
||||
}
|
||||
@@ -199,20 +212,21 @@ static void bmips_init_secondary(void)
|
||||
{
|
||||
/* move NMI vector to kseg0, in case XKS01 is enabled */
|
||||
|
||||
-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
|
||||
- void __iomem *cbr = BMIPS_GET_CBR();
|
||||
- unsigned long old_vec;
|
||||
-
|
||||
- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
-
|
||||
- clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
- write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
|
||||
- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
|
||||
+ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
|
||||
+ void __iomem *cbr = BMIPS_GET_CBR();
|
||||
+ unsigned long old_vec;
|
||||
+
|
||||
+ old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
+ __raw_writel(old_vec & ~0x20000000,
|
||||
+ cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
+
|
||||
+ clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
|
||||
+ } else if (cpu_is_bmips5000()) {
|
||||
+ write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
|
||||
+ (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
|
||||
|
||||
- write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
|
||||
-#endif
|
||||
+ write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
|
||||
+ }
|
||||
}
|
||||
|
||||
/*
|
||||
@@ -237,8 +251,6 @@ static void bmips_cpus_done(void)
|
||||
{
|
||||
}
|
||||
|
||||
-#if defined(CONFIG_CPU_BMIPS5000)
|
||||
-
|
||||
/*
|
||||
* BMIPS5000 raceless IPIs
|
||||
*
|
||||
@@ -247,12 +259,12 @@ static void bmips_cpus_done(void)
|
||||
* IPI1 is used for SMP_CALL_FUNCTION
|
||||
*/
|
||||
|
||||
-static void bmips_send_ipi_single(int cpu, unsigned int action)
|
||||
+static void bmips5000_send_ipi_single(int cpu, unsigned int action)
|
||||
{
|
||||
write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
|
||||
}
|
||||
|
||||
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
|
||||
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
int action = irq - IPI0_IRQ;
|
||||
|
||||
@@ -266,8 +278,6 @@ static irqreturn_t bmips_ipi_interrupt(i
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
-#else
|
||||
-
|
||||
/*
|
||||
* BMIPS43xx racey IPIs
|
||||
*
|
||||
@@ -281,7 +291,7 @@ static irqreturn_t bmips_ipi_interrupt(i
|
||||
static DEFINE_SPINLOCK(ipi_lock);
|
||||
static DEFINE_PER_CPU(int, ipi_action_mask);
|
||||
|
||||
-static void bmips_send_ipi_single(int cpu, unsigned int action)
|
||||
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
@@ -292,7 +302,7 @@ static void bmips_send_ipi_single(int cp
|
||||
spin_unlock_irqrestore(&ipi_lock, flags);
|
||||
}
|
||||
|
||||
-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
|
||||
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
unsigned long flags;
|
||||
int action, cpu = irq - IPI0_IRQ;
|
||||
@@ -311,7 +321,13 @@ static irqreturn_t bmips_ipi_interrupt(i
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
-#endif /* BMIPS type */
|
||||
+static void bmips_send_ipi_single(int cpu, unsigned int action)
|
||||
+{
|
||||
+ if (cpu_is_bmips4350() || cpu_is_bmips4380())
|
||||
+ bmips43xx_send_ipi_single(cpu, action);
|
||||
+ else if (cpu_is_bmips5000())
|
||||
+ bmips5000_send_ipi_single(cpu, action);
|
||||
+}
|
||||
|
||||
static void bmips_send_ipi_mask(const struct cpumask *mask,
|
||||
unsigned int action)
|
||||
@@ -421,43 +437,44 @@ void __cpuinit bmips_ebase_setup(void)
|
||||
|
||||
BUG_ON(ebase != CKSEG0);
|
||||
|
||||
-#if defined(CONFIG_CPU_BMIPS4350)
|
||||
- /*
|
||||
- * BMIPS4350 cannot relocate the normal vectors, but it
|
||||
- * can relocate the BEV=1 vectors. So CPU1 starts up at
|
||||
- * the relocated BEV=1, IV=0 general exception vector @
|
||||
- * 0xa000_0380.
|
||||
- *
|
||||
- * set_uncached_handler() is used here because:
|
||||
- * - CPU1 will run this from uncached space
|
||||
- * - None of the cacheflush functions are set up yet
|
||||
- */
|
||||
- set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
|
||||
- &bmips_smp_int_vec, 0x80);
|
||||
- __sync();
|
||||
- return;
|
||||
-#elif defined(CONFIG_CPU_BMIPS4380)
|
||||
- /*
|
||||
- * 0x8000_0000: reset/NMI (initially in kseg1)
|
||||
- * 0x8000_0400: normal vectors
|
||||
- */
|
||||
- new_ebase = 0x80000400;
|
||||
- cbr = BMIPS_GET_CBR();
|
||||
- __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
|
||||
- __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
-#elif defined(CONFIG_CPU_BMIPS5000)
|
||||
- /*
|
||||
- * 0x8000_0000: reset/NMI (initially in kseg1)
|
||||
- * 0x8000_1000: normal vectors
|
||||
- */
|
||||
- new_ebase = 0x80001000;
|
||||
- write_c0_brcm_bootvec(0xa0088008);
|
||||
- write_c0_ebase(new_ebase);
|
||||
- if (max_cpus > 2)
|
||||
- bmips_write_zscm_reg(0xa0, 0xa008a008);
|
||||
-#else
|
||||
- return;
|
||||
-#endif
|
||||
+ if (cpu_is_bmips4350()) {
|
||||
+ /*
|
||||
+ * BMIPS4350 cannot relocate the normal vectors, but it
|
||||
+ * can relocate the BEV=1 vectors. So CPU1 starts up at
|
||||
+ * the relocated BEV=1, IV=0 general exception vector @
|
||||
+ * 0xa000_0380.
|
||||
+ *
|
||||
+ * set_uncached_handler() is used here because:
|
||||
+ * - CPU1 will run this from uncached space
|
||||
+ * - None of the cacheflush functions are set up yet
|
||||
+ */
|
||||
+ set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
|
||||
+ &bmips_smp_int_vec, 0x80);
|
||||
+ __sync();
|
||||
+ return;
|
||||
+ } else if (cpu_is_bmips4380()) {
|
||||
+ /*
|
||||
+ * 0x8000_0000: reset/NMI (initially in kseg1)
|
||||
+ * 0x8000_0400: normal vectors
|
||||
+ */
|
||||
+ new_ebase = 0x80000400;
|
||||
+ cbr = BMIPS_GET_CBR();
|
||||
+ __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
|
||||
+ __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
|
||||
+ } else if (cpu_is_bmips5000()) {
|
||||
+ /*
|
||||
+ * 0x8000_0000: reset/NMI (initially in kseg1)
|
||||
+ * 0x8000_1000: normal vectors
|
||||
+ */
|
||||
+ new_ebase = 0x80001000;
|
||||
+ write_c0_brcm_bootvec(0xa0088008);
|
||||
+ write_c0_ebase(new_ebase);
|
||||
+ if (max_cpus > 2)
|
||||
+ bmips_write_zscm_reg(0xa0, 0xa008a008);
|
||||
+ } else {
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
board_nmi_handler_setup = &bmips_nmi_handler_setup;
|
||||
ebase = new_ebase;
|
||||
}
|
||||
@ -0,0 +1,126 @@
|
||||
From 1ecac776e6c652e3059d4f4d9dd8369e89ebef81 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Thu, 27 Jun 2013 23:57:20 +0200
|
||||
Subject: [PATCH 05/10] MIPS: bmips: merge CPU options into one option
|
||||
|
||||
Instead of treating each flavour as an exclusive CPU to select, make
|
||||
BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
|
||||
flavours to include support.
|
||||
|
||||
Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
|
||||
and BMISP5000.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/Kconfig | 77 +++++++++++++++++++++++++----------------------------
|
||||
1 file changed, 36 insertions(+), 41 deletions(-)
|
||||
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -130,6 +130,7 @@ config BCM63XX
|
||||
select DMA_NONCOHERENT
|
||||
select IRQ_CPU
|
||||
select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_CPU_BMIPS
|
||||
select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
|
||||
select NR_CPUS_DEFAULT_2
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
@@ -1454,41 +1455,21 @@ config CPU_CAVIUM_OCTEON
|
||||
can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
|
||||
Full details can be found at http://www.caviumnetworks.com.
|
||||
|
||||
-config CPU_BMIPS3300
|
||||
- bool "BMIPS3300"
|
||||
- depends on SYS_HAS_CPU_BMIPS3300
|
||||
- select CPU_BMIPS
|
||||
- help
|
||||
- Broadcom BMIPS3300 processors.
|
||||
-
|
||||
-config CPU_BMIPS4350
|
||||
- bool "BMIPS4350"
|
||||
- depends on SYS_HAS_CPU_BMIPS4350
|
||||
- select CPU_BMIPS
|
||||
- select SYS_SUPPORTS_SMP
|
||||
- select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
- help
|
||||
- Broadcom BMIPS4350 ("VIPER") processors.
|
||||
-
|
||||
-config CPU_BMIPS4380
|
||||
- bool "BMIPS4380"
|
||||
- depends on SYS_HAS_CPU_BMIPS4380
|
||||
- select CPU_BMIPS
|
||||
- select SYS_SUPPORTS_SMP
|
||||
- select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
- help
|
||||
- Broadcom BMIPS4380 processors.
|
||||
-
|
||||
-config CPU_BMIPS5000
|
||||
- bool "BMIPS5000"
|
||||
- depends on SYS_HAS_CPU_BMIPS5000
|
||||
- select CPU_BMIPS
|
||||
- select CPU_SUPPORTS_HIGHMEM
|
||||
- select MIPS_CPU_SCACHE
|
||||
- select SYS_SUPPORTS_SMP
|
||||
- select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
+config CPU_BMIPS
|
||||
+ bool "Broadcom BMIPS"
|
||||
+ depends on SYS_HAS_CPU_BMIPS
|
||||
+ select CPU_MIPS32
|
||||
+ select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
|
||||
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
|
||||
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4380
|
||||
+ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
|
||||
+ select CPU_SUPPORTS_32BIT_KERNEL
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select IRQ_CPU
|
||||
+ select SWAP_IO_SPACE
|
||||
+ select WEAK_ORDERING
|
||||
help
|
||||
- Broadcom BMIPS5000 processors.
|
||||
+ Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
|
||||
|
||||
config CPU_XLR
|
||||
bool "Netlogic XLR SoC"
|
||||
@@ -1569,14 +1550,25 @@ config CPU_LOONGSON1
|
||||
select CPU_SUPPORTS_32BIT_KERNEL
|
||||
select CPU_SUPPORTS_HIGHMEM
|
||||
|
||||
-config CPU_BMIPS
|
||||
+config CPU_BMIPS3300
|
||||
bool
|
||||
- select CPU_MIPS32
|
||||
- select CPU_SUPPORTS_32BIT_KERNEL
|
||||
- select DMA_NONCOHERENT
|
||||
- select IRQ_CPU
|
||||
- select SWAP_IO_SPACE
|
||||
- select WEAK_ORDERING
|
||||
+
|
||||
+config CPU_BMIPS4350
|
||||
+ bool
|
||||
+ select SYS_SUPPORTS_SMP
|
||||
+ select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
+
|
||||
+config CPU_BMIPS4380
|
||||
+ bool
|
||||
+ select SYS_SUPPORTS_SMP
|
||||
+ select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
+
|
||||
+config CPU_BMIPS5000
|
||||
+ bool
|
||||
+ select CPU_SUPPORTS_HIGHMEM
|
||||
+ select MIPS_CPU_SCACHE
|
||||
+ select SYS_SUPPORTS_SMP
|
||||
+ select SYS_SUPPORTS_HOTPLUG_CPU
|
||||
|
||||
config SYS_HAS_CPU_LOONGSON2E
|
||||
bool
|
||||
@@ -1650,6 +1642,9 @@ config SYS_HAS_CPU_SB1
|
||||
config SYS_HAS_CPU_CAVIUM_OCTEON
|
||||
bool
|
||||
|
||||
+config SYS_HAS_CPU_BMIPS
|
||||
+ bool
|
||||
+
|
||||
config SYS_HAS_CPU_BMIPS3300
|
||||
bool
|
||||
|
||||
@ -0,0 +1,72 @@
|
||||
From 9d1e9d7abd2f2d067169fb0c62e34cf080bbd7a1 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Sun, 23 Jun 2013 12:25:49 +0200
|
||||
Subject: [PATCH 06/10] MIPS: BCM63XX: let the individual SoCs select the
|
||||
appropriate CPUs
|
||||
|
||||
Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
|
||||
option for its embedded processor, so support will be conditionally
|
||||
included.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
|
||||
fix bmips selection
|
||||
---
|
||||
arch/mips/Kconfig | 1 -
|
||||
arch/mips/bcm63xx/Kconfig | 8 ++++++++
|
||||
2 files changed, 8 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -131,7 +131,6 @@ config BCM63XX
|
||||
select IRQ_CPU
|
||||
select SYS_HAS_CPU_MIPS32_R1
|
||||
select SYS_HAS_CPU_BMIPS
|
||||
- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
|
||||
select NR_CPUS_DEFAULT_2
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
--- a/arch/mips/bcm63xx/Kconfig
|
||||
+++ b/arch/mips/bcm63xx/Kconfig
|
||||
@@ -3,33 +3,41 @@ menu "CPU support"
|
||||
|
||||
config BCM63XX_CPU_3368
|
||||
bool "support 3368 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6328
|
||||
bool "support 6328 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6338
|
||||
bool "support 6338 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS3300
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6345
|
||||
bool "support 6345 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS3300
|
||||
|
||||
config BCM63XX_CPU_6348
|
||||
bool "support 6348 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS3300
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6358
|
||||
bool "support 6358 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6362
|
||||
bool "support 6362 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
|
||||
config BCM63XX_CPU_6368
|
||||
bool "support 6368 CPU"
|
||||
+ select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
endmenu
|
||||
|
||||
@ -0,0 +1,42 @@
|
||||
From aa15ac91faccc3bf01a29670b1f9ae1945cea056 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Sun, 23 Jun 2013 14:04:51 +0200
|
||||
Subject: [PATCH 07/10] MIPS: bmips: add a helper function for registering smp
|
||||
ops
|
||||
|
||||
Add a helper similar to the generic register_XXX_smp_ops() for bmips.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/include/asm/bmips.h | 13 +++++++++++++
|
||||
1 file changed, 13 insertions(+)
|
||||
|
||||
--- a/arch/mips/include/asm/bmips.h
|
||||
+++ b/arch/mips/include/asm/bmips.h
|
||||
@@ -47,6 +47,7 @@
|
||||
#include <linux/cpumask.h>
|
||||
#include <asm/cpu-features.h>
|
||||
#include <asm/r4kcache.h>
|
||||
+#include <asm/smp-ops.h>
|
||||
|
||||
#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
|
||||
#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
|
||||
@@ -59,6 +60,18 @@
|
||||
current_cpu_type() == CPU_BMIPS5000)
|
||||
|
||||
extern struct plat_smp_ops bmips_smp_ops;
|
||||
+
|
||||
+static inline int register_bmips_smp_ops(void)
|
||||
+{
|
||||
+#ifdef CONFIG_CPU_BMIPS
|
||||
+ register_smp_ops(&bmips_smp_ops);
|
||||
+
|
||||
+ return 0;
|
||||
+#else
|
||||
+ return -ENODEV;
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
extern char bmips_reset_nmi_vec;
|
||||
extern char bmips_reset_nmi_vec_end;
|
||||
extern char bmips_smp_movevec;
|
||||
@ -0,0 +1,26 @@
|
||||
From c489eace9492d1b8bedb314bdef169e719161bff Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Fri, 28 Jun 2013 00:08:16 +0200
|
||||
Subject: [PATCH 08/10] MIPS: BCM63XX: always register bmips smp ops
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/bcm63xx/prom.c | 6 +++---
|
||||
1 file changed, 3 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/arch/mips/bcm63xx/prom.c
|
||||
+++ b/arch/mips/bcm63xx/prom.c
|
||||
@@ -59,10 +59,10 @@ void __init prom_init(void)
|
||||
/* do low level board init */
|
||||
board_prom_init();
|
||||
|
||||
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
|
||||
- /* set up SMP */
|
||||
- register_smp_ops(&bmips_smp_ops);
|
||||
+ /* set up SMP */
|
||||
+ register_bmips_smp_ops();
|
||||
|
||||
+ if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
|
||||
/*
|
||||
* BCM6328 might not have its second CPU enabled, while BCM6358
|
||||
* needs special handling for its shared TLB, so disable SMP
|
||||
@ -0,0 +1,21 @@
|
||||
From 3a862fd3cc4f477ad2232370abfceca1ec2145ae Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Fri, 28 Jun 2013 00:10:07 +0200
|
||||
Subject: [PATCH 09/10] MIPS: BCM63XX: change the guard to a BMIPS4350 check
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/bcm63xx/prom.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/mips/bcm63xx/prom.c
|
||||
+++ b/arch/mips/bcm63xx/prom.c
|
||||
@@ -62,7 +62,7 @@ void __init prom_init(void)
|
||||
/* set up SMP */
|
||||
register_bmips_smp_ops();
|
||||
|
||||
- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
|
||||
+ if (cpu_is_bmips4350()) {
|
||||
/*
|
||||
* BCM6328 might not have its second CPU enabled, while BCM6358
|
||||
* needs special handling for its shared TLB, so disable SMP
|
||||
@ -0,0 +1,36 @@
|
||||
From 32d4b03c0aedb96022e86a67a560f6eaf488200a Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jogo@openwrt.org>
|
||||
Date: Fri, 28 Jun 2013 00:25:13 +0200
|
||||
Subject: [PATCH 10/10] MIPS: BCM63XX: disable SMP also on BCM3368
|
||||
|
||||
BCM3368 has the same shared TLB as BCM6358.
|
||||
|
||||
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
---
|
||||
arch/mips/bcm63xx/prom.c | 8 ++++----
|
||||
1 file changed, 4 insertions(+), 4 deletions(-)
|
||||
|
||||
--- a/arch/mips/bcm63xx/prom.c
|
||||
+++ b/arch/mips/bcm63xx/prom.c
|
||||
@@ -64,9 +64,9 @@ void __init prom_init(void)
|
||||
|
||||
if (cpu_is_bmips4350()) {
|
||||
/*
|
||||
- * BCM6328 might not have its second CPU enabled, while BCM6358
|
||||
- * needs special handling for its shared TLB, so disable SMP
|
||||
- * for now.
|
||||
+ * BCM6328 might not have its second CPU enabled, while BCM3368
|
||||
+ * and BCM6358 need special handling for their shared TLB, so
|
||||
+ * disable SMP for now.
|
||||
*/
|
||||
if (BCMCPU_IS_6328()) {
|
||||
reg = bcm_readl(BCM_6328_OTP_BASE +
|
||||
@@ -74,7 +74,7 @@ void __init prom_init(void)
|
||||
|
||||
if (reg & OTP_6328_REG3_TP1_DISABLED)
|
||||
bmips_smp_enabled = 0;
|
||||
- } else if (BCMCPU_IS_6358()) {
|
||||
+ } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
|
||||
bmips_smp_enabled = 0;
|
||||
}
|
||||
|
||||
@ -16,8 +16,8 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
||||
|
||||
--- a/arch/mips/bcm63xx/Kconfig
|
||||
+++ b/arch/mips/bcm63xx/Kconfig
|
||||
@@ -5,9 +5,16 @@ config BCM63XX_CPU_3368
|
||||
bool "support 3368 CPU"
|
||||
@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
|
||||
+config BCM63XX_OHCI
|
||||
@ -28,29 +28,33 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
||||
+
|
||||
config BCM63XX_CPU_6328
|
||||
bool "support 6328 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
+ select BCM63XX_OHCI
|
||||
|
||||
config BCM63XX_CPU_6338
|
||||
bool "support 6338 CPU"
|
||||
@@ -19,18 +26,22 @@ config BCM63XX_CPU_6345
|
||||
config BCM63XX_CPU_6348
|
||||
@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
|
||||
bool "support 6348 CPU"
|
||||
select SYS_HAS_CPU_BMIPS3300
|
||||
select HW_HAS_PCI
|
||||
+ select BCM63XX_OHCI
|
||||
|
||||
config BCM63XX_CPU_6358
|
||||
bool "support 6358 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
+ select BCM63XX_OHCI
|
||||
|
||||
config BCM63XX_CPU_6362
|
||||
bool "support 6362 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
+ select BCM63XX_OHCI
|
||||
|
||||
config BCM63XX_CPU_6368
|
||||
bool "support 6368 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
+ select BCM63XX_OHCI
|
||||
endmenu
|
||||
@ -19,7 +19,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
||||
|
||||
--- a/arch/mips/bcm63xx/Kconfig
|
||||
+++ b/arch/mips/bcm63xx/Kconfig
|
||||
@@ -11,10 +11,17 @@ config BCM63XX_OHCI
|
||||
@@ -12,11 +12,18 @@ config BCM63XX_OHCI
|
||||
select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
|
||||
select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
|
||||
|
||||
@ -31,26 +31,29 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
||||
+
|
||||
config BCM63XX_CPU_6328
|
||||
bool "support 6328 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
select BCM63XX_OHCI
|
||||
+ select BCM63XX_EHCI
|
||||
|
||||
config BCM63XX_CPU_6338
|
||||
bool "support 6338 CPU"
|
||||
@@ -32,16 +39,19 @@ config BCM63XX_CPU_6358
|
||||
bool "support 6358 CPU"
|
||||
@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
select BCM63XX_OHCI
|
||||
+ select BCM63XX_EHCI
|
||||
|
||||
config BCM63XX_CPU_6362
|
||||
bool "support 6362 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
select BCM63XX_OHCI
|
||||
+ select BCM63XX_EHCI
|
||||
|
||||
config BCM63XX_CPU_6368
|
||||
bool "support 6368 CPU"
|
||||
select SYS_HAS_CPU_BMIPS4350
|
||||
select HW_HAS_PCI
|
||||
select BCM63XX_OHCI
|
||||
+ select BCM63XX_EHCI
|
||||
Loading…
Reference in New Issue
Block a user