RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-14 10:54:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for RouterBOARD mAP

Browse Source 
The MikroTik mAP-2nd (sold as mAP) is an indoor 2.4Ghz AP with
802.3af/at PoE input and passive PoE passthrough.

See https://mikrotik.com/product/RBmAP2nD for more details.

Specifications:
 - SoC: QCA9533
 - RAM: 64MB
 - Storage: 16MB NOR
 - Wireless: QCA9533 802.11b/g/n 2x2
 - Ethernet: 2x 10/100 ports,
    802.3af/at PoE in port 1, 500 mA passive PoE out on port 2
 - 7 user-controllable LEDs

Note: the device is a tiny AP and does not distinguish between both
ethernet ports roles, so they are both assigned to lan.
With the current setup, ETH1 is connected to eth1 and ETH2 is connected
to eth0 via the embedded switch port 2.

Flashing:
 TFTP boot initramfs image and then perform sysupgrade. The "ETH1" port
 must be used to upload the TFTP image. Follow common MikroTik procedure
 as in https://openwrt.org/toh/mikrotik/common.

Tested-By: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
This commit is contained in:
Thibaut VARÈNE 2022-06-12 21:48:40 +02:00 committed by Koen Vandeputte
parent bb929a0f9c
commit e1223dbee3
5 changed files with 134 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

113
target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts Normal file
View File

@ -0,0 +1,113 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9533_mikrotik_routerboard-16m.dtsi"
/ {
compatible = "mikrotik,routerboard-map-2nd", "qca,qca9533";
model = "MikroTik RouterBOARD mAP-2nD (mAP)";
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
leds {
compatible = "gpio-leds";
power {
label = "green:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
eth_1 {
label = "green:eth_1";
gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>;
};
eth_2 {
label = "green:eth_2";
gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
};
poe_out {
label = "red:poe_out";
gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>;
};
led_user: user {
label = "green:user";
gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
};
wlan {
label = "green:wlan";
gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
ap_cap {
label = "green:ap_cap";
gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
usb_power {
gpio-export,name = "usb-power";
gpio-export,output = <1>;
gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>;
};
enable_poe_port5 {
gpio-export,name = "enable-poe";
gpio-export,output = <0>;
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pin_spi_cs1>;
gpio_ext: gpio_ext@1 {
compatible = "fairchild,74hc595";
reg = <1>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <25000000>;
};
};
&pinmux {
pin_spi_cs1: pinmux_spi_cs1 {
pinctrl-single,bits = <0x8 0x0a000000 0xff000000>;
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&usb0 {
status = "okay";
};
&usb_phy {
status = "okay";
};

9
target/linux/ath79/image/mikrotik.mk
View File

@ -85,6 +85,15 @@ define Device/mikrotik_routerboard-lhg-5nd
endef
TARGET_DEVICES += mikrotik_routerboard-lhg-5nd
define Device/mikrotik_routerboard-map-2nd
$(Device/mikrotik_nor)
SOC := qca9533
DEVICE_MODEL := RouterBOARD mAP-2nD (mAP)
DEVICE_PACKAGES += kmod-usb2 kmod-ledtrig-gpio
IMAGE_SIZE := 16256k
endef
TARGET_DEVICES += mikrotik_routerboard-map-2nd
define Device/mikrotik_routerboard-mapl-2nd
$(Device/mikrotik_nor)
SOC := qca9533

5
target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
View File

@ -28,6 +28,11 @@ mikrotik,routerboard-lhg-5nd)
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
;;
mikrotik,routerboard-map-2nd)
ucidef_set_led_netdev "eth_1" "eth_1" "green:eth_1" "eth1"
ucidef_set_led_switch "eth_2" "eth_2" "green:eth_2" "switch0" "0x4"
ucidef_set_led_gpio "poe" "poe" "red:poe_out" "14" "0"
;;
mikrotik,routerboard-wapr-2nd)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"

4
target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
View File

@ -30,6 +30,9 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
mikrotik,routerboard-map-2nd)
ucidef_set_interface_lan "eth0 eth1"
;;
mikrotik,routerboard-962uigs-5hact2hnt)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
@ -52,6 +55,7 @@ ath79_setup_macs()
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-map-2nd|\
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
mikrotik,routerboard-wap-2nd|\

3
target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -31,6 +31,9 @@ case "$FIRMWARE" in
mikrotik,routerboard-wapr-2nd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1)
;;
mikrotik,routerboard-map-2nd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 3)
;;
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2)