mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-28 01:22:42 +00:00
mediatek/filogic: add OpenWrt One support
Specification: - MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX) - 1GB RAM - 16MB NOR - 128MB NAND - 3 LEDs (red, green, blue, white) - 2 buttons (reset, user defined) - 1 2.5Gbit WAN port (Airoha EN8811h) - 1 1Gbit LAN ports - 1 single lane M.2 SSD slot - 1 mikroBus socket - externel HW WDT (25s refresh time) - i2c RTC (with battery backup) Serial Interface - UBS-C CDC-ACM - 3 Pins GND, RX, TX - Settings: 115200, 8N1 MAC addresses are not populated on the early samples. Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin
parent
47d308a46c
commit
dd58ad968a
457
target/linux/mediatek/dts/mt7981b-openwrt-one.dts
Normal file
457
target/linux/mediatek/dts/mt7981b-openwrt-one.dts
Normal file
@ -0,0 +1,457 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OpenWrt One";
|
||||
compatible = "openwrt,one", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_status_white;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
rootdisk = <&ubi_fit_volume>;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
user {
|
||||
label = "user";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led_status_white: led-0 {
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
pwms = <&pwm 0 10000>;
|
||||
linux,default-trigger = "pattern";
|
||||
led-pattern = <0 500 25 500>;
|
||||
};
|
||||
|
||||
led_status_green: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
pwms = <&pwm 1 10000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
gpio-0 {
|
||||
gpio-export,name = "mikrobus-reset";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-1 {
|
||||
gpio-export,name = "watchdog-enable";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-2 {
|
||||
gpio-export,name = "usb-enable";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-watchdog {
|
||||
compatible = "linux,wdt-gpio";
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
hw_algo = "toggle";
|
||||
hw_margin_ms = <25000>;
|
||||
always-running;
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-handle = <&phy15>;
|
||||
phy-mode = "2500base-x";
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_factory_a>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
phy15: phy@f {
|
||||
reg = <0xf>;
|
||||
|
||||
airoha,pnswap-rx;
|
||||
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <20000>;
|
||||
|
||||
phy-mode = "2500base-x";
|
||||
full-duplex;
|
||||
pause;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
|
||||
spi1_flash_pins: spi1-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi1_1";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI1_CS";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
|
||||
spi2_flash_pins: spi2-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi2";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_pins: i2c-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c0_0";
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_0_tx_rx";
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0_0", "pwm1_1";
|
||||
};
|
||||
};
|
||||
|
||||
pcie_pins: pcie-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie_pereset";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_pins>;
|
||||
status = "okay";
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
cs-gpios = <0>, <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <52000000>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x100000 0x7F00000>;
|
||||
compatible = "linux,ubi";
|
||||
|
||||
volumes {
|
||||
ubi_fit_volume: ubi-volume-fit {
|
||||
volname = "fit";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_flash_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2-nor";
|
||||
reg = <0x00000 0x40000>;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0xc0000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x24 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
macaddr_factory_a: macaddr@a {
|
||||
compatible = "mac-base";
|
||||
reg = <0x2a 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "fip-nor";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "recovery";
|
||||
reg = <0x180000 0xc80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
phys = <&u2port0 PHY_TYPE_USB2>;
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
mediatek,u3p-dis-msk = <0x01>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sgmiisys0 {
|
||||
/delete-node/ mediatek,pnswap;
|
||||
};
|
||||
@ -59,6 +59,12 @@ openembed,som7981)
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
;;
|
||||
openwrt,one)
|
||||
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
|
||||
ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
;;
|
||||
routerich,ax3000)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
||||
|
||||
@ -59,7 +59,8 @@ mediatek_setup_interfaces()
|
||||
glinet,gl-mt3000|\
|
||||
glinet,gl-x3000|\
|
||||
glinet,gl-xe3000|\
|
||||
openembed,som7981)
|
||||
openembed,som7981|\
|
||||
openwrt,one)
|
||||
ucidef_set_interfaces_lan_wan eth1 eth0
|
||||
;;
|
||||
dlink,aquila-pro-ai-m30-a1)
|
||||
|
||||
@ -31,6 +31,9 @@ case "$FIRMWARE" in
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
openwrt,one)
|
||||
caldata_extract "factory" 0x0 0x1000
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
|
||||
@ -86,6 +86,7 @@ platform_do_upgrade() {
|
||||
bananapi,bpi-r4-poe|\
|
||||
mediatek,mt7988a-rfb|\
|
||||
jdcloud,re-cp-03|\
|
||||
openwrt,one|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088|\
|
||||
|
||||
@ -951,6 +951,54 @@ define Device/openembed_som7981
|
||||
endef
|
||||
TARGET_DEVICES += openembed_som7981
|
||||
|
||||
define Build/append-openwrt-one-eeprom
|
||||
dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
|
||||
endef
|
||||
|
||||
define Device/openwrt_one
|
||||
DEVICE_VENDOR := OpenWrt
|
||||
DEVICE_MODEL := One
|
||||
DEVICE_DTS := mt7981b-openwrt-one
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_DTC_FLAGS := --pad 4096
|
||||
DEVICE_DTS_LOADADDR := 0x43f00000
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h
|
||||
KERNEL_LOADADDR := 0x44000000
|
||||
KERNEL := kernel-bin | gzip
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
KERNEL_INITRAMFS_SUFFIX := .itb
|
||||
KERNEL_IN_UBI := 1
|
||||
UBOOTENV_IN_UBI := 1
|
||||
IMAGES := sysupgrade.itb
|
||||
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
||||
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
||||
ARTIFACTS := \
|
||||
nor-preloader.bin nor-bl31-uboot.fip \
|
||||
snand-preloader.bin snand-bl31-uboot.fip \
|
||||
factory.ubi snand-factory.bin nor-factory.bin
|
||||
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4
|
||||
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor
|
||||
ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4
|
||||
ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand
|
||||
ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb
|
||||
ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
|
||||
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
|
||||
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
|
||||
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
|
||||
ubinize-image fit squashfs-sysupgrade.itb
|
||||
ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \
|
||||
append-openwrt-one-eeprom | pad-to 1024k | \
|
||||
mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
|
||||
append-image-stage initramfs.itb
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \
|
||||
$(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
|
||||
endef
|
||||
TARGET_DEVICES += openwrt_one
|
||||
|
||||
define Device/qihoo_360t7
|
||||
DEVICE_VENDOR := Qihoo
|
||||
DEVICE_MODEL := 360T7
|
||||
|
||||
Loading…
Reference in New Issue
Block a user