ar71xx: create wndr3700 network config from uci-defaults

Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373
This commit is contained in:
Luka Perkov 2014-01-23 11:33:42 +00:00
parent d66d2ad104
commit cbc892a549
3 changed files with 40 additions and 97 deletions

View File

@ -1,77 +0,0 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0.1
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
option ip6assign 60
config interface wan
option ifname eth1
option proto dhcp
config interface wan6
option ifname @wan
option proto dhcpv6
config globals globals
option ula_prefix auto
config switch
option name rtl8366s
option reset 1
option enable_vlan 1
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
option blinkrate 2
config switch_vlan
option device rtl8366s
option vlan 1
option ports "0 1 2 3 5t"
config switch_port
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
option device rtl8366s
option port 1
option led 6
config switch_port
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
option device rtl8366s
option port 2
option led 9
config switch_port
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
# To toggle the use of green or orange LEDs for the WAN port,
# see the LED setting for wndr3700:green:wan in /etc/config/system.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
option device rtl8366s
option port 5
option led 2

View File

@ -1,20 +0,0 @@
#!/bin/sh /etc/rc.common
#
# Copyright (C) 2009 OpenWrt.org
#
START=05
start() {
. /lib/ar71xx.sh
local board=$(ar71xx_board_name)
[ ! -d /etc/defconfig/$board ] && return 0
for f in $( ls /etc/defconfig/$board ); do
if [ ! -e /etc/config/$f ]; then
cp /etc/defconfig/$board/$f /etc/config/
fi
done
}

View File

@ -321,6 +321,46 @@ ew-dorin-router)
ucidef_add_switch_vlan "switch0" "1" "0 2 3"
;;
wndr3700)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
uci set network.@switch[-1].blinkrate='2'
ucidef_add_switch_port "switch0" "1"
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
uci set network.@switch_port[-1].led='6'
ucidef_add_switch_port "switch0" "2"
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
uci set network.@switch_port[-1].led='9'
ucidef_add_switch_port "switch0" "5"
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
# To toggle the use of green or orange LEDs for the WAN port,
# see the LED setting for wndr3700:green:wan in /etc/config/system.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
uci set network.@switch_port[-1].led='2'
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;