ath79: add support for TP-Link RE450 v3
TP-Link RE450 v3 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v2 besides a modified flash layout (hence I think force-flashing a RE450v2 image will lead to at least loss of MAC address). Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button- - possible UART header on PCB¹ Flash instruction: Apply factory image in OEM firmware web-gui. ¹ Didn't check to connect as I didn't even manage to connect on RE450v2 (AFAIU it requires disconnecting some resistors, which I was too much of a coward to do). But given the similarities to v2 I think it's the same or very similar procedure (and most likely also the only way to debrick). Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net> [remove dts-v1 and compatible in DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Andreas Wiese
Adrian Schmutzler
parent
7e513136c6
commit
c764c512ac
|
|
@ -1,194 +1,47 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
#include "qca9563_tplink_re450.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,re450-v2", "qca,qca9563";
|
||||
model = "TP-Link RE450 v2";
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
&partitions {
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
mdio-gpio0 = &mdio2;
|
||||
partition@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x5e0000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "tp-link:blue:power";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "tp-link:blue:wlan2g";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "tp-link:blue:wlan5g";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
lan_link {
|
||||
label = "tp-link:green:lan_link";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan_data {
|
||||
label = "tp-link:green:lan_data";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps_blue {
|
||||
label = "tp-link:blue:wps";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps_red {
|
||||
label = "tp-link:red:wps";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
partition@600000 {
|
||||
label = "partition-table";
|
||||
reg = <0x600000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
leds {
|
||||
label = "LED control button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
info: partition@610000 {
|
||||
label = "info";
|
||||
reg = <0x610000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
mdio2: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
partition@630000 {
|
||||
label = "config";
|
||||
reg = <0x630000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
|
||||
<&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
device_type = "ethernet-phy";
|
||||
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x5e0000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "partition-table";
|
||||
reg = <0x600000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
info: partition@610000 {
|
||||
label = "info";
|
||||
reg = <0x610000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@630000 {
|
||||
label = "config";
|
||||
reg = <0x630000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,53 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9563_tplink_re450.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,re450-v3", "qca,qca9563";
|
||||
model = "TP-Link RE450 v3";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
info: partition@20000 {
|
||||
label = "info";
|
||||
reg = <0x020000 0x002000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@22000 {
|
||||
label = "partition-table";
|
||||
reg = <0x022000 0x002000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@24000 {
|
||||
label = "info2";
|
||||
reg = <0x024000 0x00a000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2e000 {
|
||||
label = "config";
|
||||
reg = <0x02e000 0x022000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x050000 0x7a0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,154 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
mdio-gpio0 = &mdio2;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "tp-link:blue:power";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "tp-link:blue:wlan2g";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "tp-link:blue:wlan5g";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
lan_link {
|
||||
label = "tp-link:green:lan_link";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan_data {
|
||||
label = "tp-link:green:lan_data";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps_blue {
|
||||
label = "tp-link:blue:wps";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps_red {
|
||||
label = "tp-link:red:wps";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
leds {
|
||||
label = "LED control button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio2: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
|
||||
<&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
device_type = "ethernet-phy";
|
||||
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
|
@ -248,7 +248,8 @@ tplink,tl-wr902ac-v1)
|
|||
;;
|
||||
tplink,re355-v1|\
|
||||
tplink,re450-v1|\
|
||||
tplink,re450-v2)
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3)
|
||||
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
|
||||
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ ath79_setup_interfaces()
|
|||
tplink,re355-v1|\
|
||||
tplink,re450-v1|\
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3|\
|
||||
tplink,tl-wr902ac-v1|\
|
||||
ubnt,bullet-m-ar7240|\
|
||||
ubnt,bullet-m-ar7241|\
|
||||
|
|
|
|||
|
|
@ -118,7 +118,8 @@ case "$FIRMWARE" in
|
|||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
|
||||
;;
|
||||
tplink,re450-v2)
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -400,6 +400,18 @@ define Device/tplink_re450-v2
|
|||
endef
|
||||
TARGET_DEVICES += tplink_re450-v2
|
||||
|
||||
define Device/tplink_re450-v3
|
||||
$(Device/tplink-safeloader)
|
||||
SOC := qca9563
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_MODEL := RE450
|
||||
DEVICE_VARIANT := v3
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
||||
TPLINK_BOARD_ID := RE450-V3
|
||||
LOADER_TYPE := elf
|
||||
endef
|
||||
TARGET_DEVICES += tplink_re450-v3
|
||||
|
||||
define Device/tplink_tl-mr6400-v1
|
||||
$(Device/tplink-8mlzma)
|
||||
SOC := qca9531
|
||||
|
|
|
|||
|
|
@ -1728,7 +1728,46 @@ static struct device_info boards[] = {
|
|||
{"user-config", 0x630000, 0x10000},
|
||||
{"default-config", 0x640000, 0x10000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the RE450 v3 */
|
||||
{
|
||||
.id = "RE450-V3",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
|
||||
"{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
|
||||
.support_trail = '\x00',
|
||||
.soft_ver = NULL,
|
||||
|
||||
/* We're using a dynamic kernel/rootfs split here */
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x20000},
|
||||
{"default-mac", 0x20000, 0x00020},
|
||||
{"pin", 0x20020, 0x00020},
|
||||
{"product-info", 0x21000, 0x01000},
|
||||
{"partition-table", 0x22000, 0x02000},
|
||||
{"soft-version", 0x24000, 0x01000},
|
||||
{"support-list", 0x25000, 0x01000},
|
||||
{"profile", 0x26000, 0x08000},
|
||||
{"user-config", 0x2e000, 0x10000},
|
||||
{"default-config", 0x3e000, 0x10000},
|
||||
{"config-info", 0x4e000, 0x00400},
|
||||
{"firmware", 0x50000, 0x7a0000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue