RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-01-04 13:42:24 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for Netgear WNDR4500 v3

Browse Source 
This patch introduces support for Netgear WNDR4500v3. Router
is very similar to WNDR4300v2 and is based on the same PCB.

Information gathered from various Internet sources (including
https://patchwork.ozlabs.org/patch/809227/) shows following
differences to WNDR4300v2:

 * two USB 2.0 ports with separate LEDs
 * USB LEDs soldered to secondary pads
 * WPS and RFKILL buttons soldered to secondary pads
 * described as N900 device with 3x3:3 MIMO for 2.4GHz radio
 * power supply requirement is DC 12V 2.5A
 * vendor HW ID suffix differs in one digit
 * bigger chassis

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
This commit is contained in:
Michal Cieslakiewicz 2019-12-22 21:55:54 +01:00 committed by John Crispin
parent 37a36a588a
commit a736f39432
6 changed files with 63 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
package/boot/uboot-envtools/files/ath79
View File

@ -27,6 +27,7 @@ librerouter,librerouter-v1|\
netgear,ex6400|\
netgear,ex7300|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3|\
netgear,wnr1000-v2|\
netgear,wnr2000-v3|\
netgear,wnr2200-8m|\

41
target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts Normal file
View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9563_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr4500-v3", "qca,qca9563";
model = "Netgear WNDR4500 v3";
};
&leds {
usb1_green {
label = "netgear:green:usb1";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
usb2_green {
label = "netgear:green:usb2";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
};
};
&usb_phy1 {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

11
target/linux/ath79/image/nand.mk
View File

@ -165,6 +165,17 @@ define Device/netgear_wndr4300-v2
endef
TARGET_DEVICES += netgear_wndr4300-v2
define Device/netgear_wndr4500-v3
SOC := qca9563
DEVICE_MODEL := WNDR4500
DEVICE_VARIANT := v3
NETGEAR_KERNEL_MAGIC := 0x27051956
NETGEAR_BOARD_ID := WNDR4500series
NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
$(Device/netgear_ath79_nand)
endef
TARGET_DEVICES += netgear_wndr4500-v3
define Device/zyxel_nbg6716
SOC := qca9558
DEVICE_VENDOR := ZyXEL

3
target/linux/ath79/nand/base-files/etc/board.d/01_leds
View File

@ -14,7 +14,8 @@ glinet,gl-ar300m-nor)
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20"
;;
esac

6
target/linux/ath79/nand/base-files/etc/board.d/02_network
View File

@ -18,7 +18,8 @@ ath79_setup_interfaces()
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@ -39,7 +40,8 @@ ath79_setup_macs()
case "$board" in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
wan_mac=$(mtd_get_mac_binary caldata 0x6)
;;
zyxel,nbg6716)

6
target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -11,7 +11,8 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x1000 0x440
;;
zyxel,nbg6716)
@ -27,7 +28,8 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x5000 0x440
;;
*)