ar71xx: add kernel support for ZyXEL NBG 6716
With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40499
This commit is contained in:
Gabor Juhos
parent
9fbbd04f45
commit
a5e398abad
|
|
@ -59,6 +59,7 @@ CONFIG_ATH79_MACH_MYNET_REXT=y
|
|||
CONFIG_ATH79_MACH_MZK_W04NU=y
|
||||
CONFIG_ATH79_MACH_MZK_W300NH=y
|
||||
CONFIG_ATH79_MACH_NBG460N=y
|
||||
CONFIG_ATH79_MACH_NBG6716=y
|
||||
CONFIG_ATH79_MACH_OM2P=y
|
||||
CONFIG_ATH79_MACH_PB42=y
|
||||
CONFIG_ATH79_MACH_PB44=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,285 @@
|
|||
/*
|
||||
* ZyXEL NBG6716 board support
|
||||
*
|
||||
* Based on the Qualcomm Atheros AP135/AP136 reference board support code
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (c) 2013 Andre Valentin <avalentin@marcant.net>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/platform/ar934x_nfc.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "nvram.h"
|
||||
|
||||
#define NBG6716_GPIO_LED_INTERNET 18
|
||||
#define NBG6716_GPIO_LED_POWER 15
|
||||
#define NBG6716_GPIO_LED_USB0 4
|
||||
#define NBG6716_GPIO_LED_USB1 13
|
||||
#define NBG6716_GPIO_LED_WIFI2G 19
|
||||
#define NBG6716_GPIO_LED_WIFI5G 17
|
||||
#define NBG6716_GPIO_LED_WPS 21
|
||||
|
||||
#define NBG6716_GPIO_BTN_RESET 23
|
||||
#define NBG6716_GPIO_BTN_RFKILL 1
|
||||
#define NBG6716_GPIO_BTN_USB0 14
|
||||
#define NBG6716_GPIO_BTN_USB1 0
|
||||
#define NBG6716_GPIO_BTN_WPS 22
|
||||
|
||||
#define NBG6716_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define NBG6716_KEYS_DEBOUNCE_INTERVAL (3 * NBG6716_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define NBG6716_MAC0_OFFSET 0
|
||||
#define NBG6716_MAC1_OFFSET 6
|
||||
#define NBG6716_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define NBG6716_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct gpio_led nbg6716_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "zyxel:white:internet",
|
||||
.gpio = NBG6716_GPIO_LED_INTERNET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:power",
|
||||
.gpio = NBG6716_GPIO_LED_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:usb0",
|
||||
.gpio = NBG6716_GPIO_LED_USB0,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:usb1",
|
||||
.gpio = NBG6716_GPIO_LED_USB1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:wifi2g",
|
||||
.gpio = NBG6716_GPIO_LED_WIFI2G,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:wifi5g",
|
||||
.gpio = NBG6716_GPIO_LED_WIFI5G,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "zyxel:white:wps",
|
||||
.gpio = NBG6716_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "RESET button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = NBG6716_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "RFKILL button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RFKILL,
|
||||
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = NBG6716_GPIO_BTN_RFKILL,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "USB0 eject button",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_0,
|
||||
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = NBG6716_GPIO_BTN_USB0,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "USB1 eject button",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_1,
|
||||
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = NBG6716_GPIO_BTN_USB1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "WPS button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = NBG6716_GPIO_BTN_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
|
||||
static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
|
||||
static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
|
||||
|
||||
static struct ar8327_platform_data nbg6716_ar8327_data = {
|
||||
.pad0_cfg = &nbg6716_ar8327_pad0_cfg,
|
||||
.pad6_cfg = &nbg6716_ar8327_pad6_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.port6_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.led_cfg = &nbg6716_ar8327_led_cfg
|
||||
};
|
||||
|
||||
static struct mdio_board_info nbg6716_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &nbg6716_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void nbg6716_get_mac(const char *name, char *mac)
|
||||
{
|
||||
u8 *nvram = (u8 *) KSEG1ADDR(0x1f040000);
|
||||
int err;
|
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
|
||||
name, mac);
|
||||
if (err)
|
||||
pr_err("no MAC address found for %s\n", name);
|
||||
}
|
||||
|
||||
static void __init nbg6716_gmac_setup(void)
|
||||
{
|
||||
void __iomem *base;
|
||||
u32 t;
|
||||
|
||||
base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
|
||||
|
||||
t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
|
||||
|
||||
t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
|
||||
t |= QCA955X_ETH_CFG_RGMII_EN;
|
||||
|
||||
__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
|
||||
|
||||
iounmap(base);
|
||||
}
|
||||
|
||||
static void __init nbg6716_common_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg6716_leds_gpio),
|
||||
nbg6716_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(nbg6716_gpio_keys),
|
||||
nbg6716_gpio_keys);
|
||||
|
||||
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
||||
ath79_register_nfc();
|
||||
|
||||
ath79_register_usb();
|
||||
|
||||
nbg6716_get_mac("ethaddr=", tmpmac);
|
||||
|
||||
ath79_register_pci();
|
||||
|
||||
ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
nbg6716_gmac_setup();
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3);
|
||||
|
||||
mdiobus_register_board_info(nbg6716_mdio0_info,
|
||||
ARRAY_SIZE(nbg6716_mdio0_info));
|
||||
|
||||
/* GMAC0 is connected to the RMGII interface */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the SGMII interface */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ath79_register_eth(1);
|
||||
}
|
||||
|
||||
static void __init nbg6716_010_setup(void)
|
||||
{
|
||||
/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
|
||||
nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
|
||||
nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
|
||||
nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
|
||||
nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
|
||||
nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
|
||||
|
||||
/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
|
||||
nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
|
||||
nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
|
||||
nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
|
||||
|
||||
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
||||
|
||||
nbg6716_ar8327_led_cfg.open_drain = 0;
|
||||
nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
|
||||
nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
|
||||
nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
|
||||
nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
|
||||
|
||||
nbg6716_common_setup();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
|
||||
"Zyxel NBG6716",
|
||||
nbg6716_010_setup);
|
||||
|
||||
|
|
@ -82,7 +82,7 @@ CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
|
|||
# CONFIG_MICREL_PHY is not set
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_M25P80 is not set
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MYLOADER_PARTS is not set
|
||||
|
|
@ -104,6 +104,6 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|||
# CONFIG_SOC_AR71XX is not set
|
||||
# CONFIG_SOC_AR724X is not set
|
||||
# CONFIG_SOC_AR913X is not set
|
||||
# CONFIG_SPI_ATH79 is not set
|
||||
CONFIG_SPI_ATH79=y
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_UBIFS_FS is not set
|
||||
|
|
|
|||
|
|
@ -0,0 +1,37 @@
|
|||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -129,3 +129,4 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) +
|
||||
obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
|
||||
obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
|
||||
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
|
||||
+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -62,6 +62,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
|
||||
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
|
||||
ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
|
||||
+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
|
||||
ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
|
||||
ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
|
||||
ATH79_MACH_OM2P, /* OpenMesh OM2P */
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -889,6 +889,17 @@ config ATH79_MACH_NBG460N
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_NBG6716
|
||||
+ bool "Zyxel NBG6716 board support"
|
||||
+ select SOC_QCA955X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_SPI
|
||||
+ select ATH79_DEV_NFC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_CARAMBOLA2
|
||||
bool "8devices Carambola2 board"
|
||||
select SOC_AR933X
|
||||
Loading…
Reference in New Issue