RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for ZyXEL NWA1100-NH 

Specifications:
 * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz
 * 1x Gigabit Ethernet (AR8035), 802.3af PoE

Installation:
* OEM Web UI is at 192.168.1.2
  login as `admin` with password `1234`
* Flash factory-AASI.bin

The string `AASI` needs to be present within the file name of the uploaded
image to be accepted by the OEM Web-based updater, the factory image is
named accordingly to save the user from the hassle of manual renaming.

TFTP Recovery:
* Open the case, connect to TTL UART port (this is the official method
  described by Zyxel, the reset button is useless during power-on)
* Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage`
  and `mi124_f1e-jffs2` via tftp at 192.168.1.10
* Interrupt uboot countdown, execute commands
  `run lk`
  `run lf`
  to flash the kernel / filesystem accordingly

MAC addresses as verified by OEM firmware:
use   address   source
LAN   *:cc      mib0 0x30 ('eth0mac'), art 0x1002 (label)
2g    *:cd      mib0 0x4b ('wifi0mac')

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper 2022-08-07 00:59:06 +02:00 committed by Hauke Mehrtens
parent a6e0ca96da
commit a434795809
4 changed files with 58 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
target/linux/ath79/dts/ar9342_zyxel_nwa1100-nh.dts Normal file
View File

@ -0,0 +1,46 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9342_zyxel_nwa11xx.dtsi"
/ {
compatible = "zyxel,nwa1100-nh", "qca,ar9342";
model = "Zyxel NWA1100-NH";
aliases {
label-mac-device = &eth0;
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_red;
};
leds {
compatible = "gpio-leds";
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_red: status_red {
label = "red:status";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led_wlan_green: wlan_green {
label = "green:wlan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_lan_green: lan_green {
label = "green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_lan_amber: lan_amber {
label = "amber:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -484,6 +484,9 @@ zbtlink,zbt-wd323)
ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "orange:lan2" "switch0" "0x08"
;;
zyxel,nwa1100-nh)
ucidef_set_led_netdev "lan_data" "LAN_DATA" "amber:lan" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan" "eth0" "link"
esac
board_config_flush

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -110,6 +110,7 @@ ath79_setup_interfaces()
ubnt,unifi|\
wd,mynet-wifi-rangeextender|\
winchannel,wb2000|\
zyxel,nwa1100-nh|\
zyxel,nwa1121-ni|\
zyxel,nwa1123-ac|\
zyxel,nwa1123-ni)

8
target/linux/ath79/image/generic.mk
View File

@ -2708,6 +2708,14 @@ define Device/zyxel_nwa11xx
vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin
endef
define Device/zyxel_nwa1100-nh
$(Device/zyxel_nwa11xx)
DEVICE_MODEL := NWA1100
DEVICE_VARIANT := NH
ZYXEL_MODEL_STRING := AASI
endef
TARGET_DEVICES += zyxel_nwa1100-nh
define Device/zyxel_nwa1121-ni
$(Device/zyxel_nwa11xx)
DEVICE_MODEL := NWA1121