ar71xx: add support for TP-LINK Archer C7 v4
TP-Link Archer C7 v4 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9561+QCA9888. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f040000 +$filesize 3. cp.b $fileaddr 0x9f040000 $filesize 4. reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau
parent
184c92e7fb
commit
9887afb1af
|
|
@ -58,7 +58,8 @@ sc1750|\
|
|||
sc450)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||
;;
|
||||
archer-c25-v1)
|
||||
archer-c25-v1|\
|
||||
archer-c7-v4)
|
||||
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
|
||||
|
|
@ -66,6 +67,12 @@ archer-c25-v1)
|
|||
ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
|
||||
case "$board" in
|
||||
archer-c7-v4)
|
||||
ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
|
||||
ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
|
|
|
|||
|
|
@ -428,6 +428,7 @@ ar71xx_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
|
||||
;;
|
||||
archer-c7-v4|\
|
||||
tl-wdr4300|\
|
||||
tl-wr1041n-v2)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
|
|||
|
|
@ -58,6 +58,7 @@ get_status_led() {
|
|||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c60-v1|\
|
||||
archer-c7-v4|\
|
||||
fritz300e|\
|
||||
gl-usb150|\
|
||||
mr12|\
|
||||
|
|
|
|||
|
|
@ -54,6 +54,7 @@ case "$FIRMWARE" in
|
|||
ath10kcal_extract "ART" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
|
||||
;;
|
||||
archer-c7-v4|\
|
||||
archer-c25-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c60-v1|\
|
||||
|
|
|
|||
|
|
@ -452,6 +452,9 @@ ar71xx_board_detect() {
|
|||
*"Archer C5")
|
||||
name="archer-c5"
|
||||
;;
|
||||
*"Archer C7 v4")
|
||||
name="archer-c7-v4"
|
||||
;;
|
||||
*"Archer C58 v1")
|
||||
name="archer-c58-v1"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -211,6 +211,7 @@ platform_check_image() {
|
|||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c60-v1|\
|
||||
archer-c7-v4|\
|
||||
bullet-m|\
|
||||
c-55|\
|
||||
carambola2|\
|
||||
|
|
|
|||
|
|
@ -1393,6 +1393,7 @@ config ATH79_MACH_ARCHER_C60_V1
|
|||
config ATH79_MACH_ARCHER_C7
|
||||
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
||||
select SOC_QCA955X
|
||||
select SOC_QCA956X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
|
|
|
|||
|
|
@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
|
|||
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
|
||||
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
|
||||
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
|
||||
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
|
||||
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
|
||||
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
|
||||
obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,260 @@
|
|||
|
||||
/*
|
||||
* Atheros ARCHER_C7 reference board support
|
||||
*
|
||||
* Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
|
||||
* Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/spi/spi_gpio.h>
|
||||
#include <linux/spi/74x164.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
|
||||
|
||||
#define ARCHER_C7_GPIO_SHIFT_OE 1
|
||||
#define ARCHER_C7_GPIO_SHIFT_SER 14
|
||||
#define ARCHER_C7_GPIO_SHIFT_SRCLK 15
|
||||
#define ARCHER_C7_GPIO_SHIFT_RCLK 16
|
||||
#define ARCHER_C7_GPIO_SHIFT_SRCLR 21
|
||||
|
||||
#define ARCHER_C7_GPIO_BTN_RESET 5
|
||||
#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
|
||||
|
||||
#define ARCHER_C7_GPIO_LED_WLAN5 9
|
||||
#define ARCHER_C7_GPIO_LED_POWER 6
|
||||
#define ARCHER_C7_GPIO_LED_USB1 7
|
||||
#define ARCHER_C7_GPIO_LED_USB2 8
|
||||
|
||||
#define ARCHER_C7_74HC_GPIO_BASE QCA956X_GPIO_COUNT
|
||||
#define ARCHER_C7_GPIO_LED_WPS (ARCHER_C7_74HC_GPIO_BASE + 0)
|
||||
#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 1)
|
||||
#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 2)
|
||||
#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 3)
|
||||
#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 4)
|
||||
#define ARCHER_C7_GPIO_LED_WAN_GREEN (ARCHER_C7_74HC_GPIO_BASE + 5)
|
||||
#define ARCHER_C7_GPIO_LED_WAN_AMBER (ARCHER_C7_74HC_GPIO_BASE + 6)
|
||||
#define ARCHER_C7_GPIO_LED_WLAN2 (ARCHER_C7_74HC_GPIO_BASE + 7)
|
||||
|
||||
#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define ARCHER_C7_MAC0_OFFSET 0
|
||||
#define ARCHER_C7_MAC1_OFFSET 6
|
||||
#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
#define ARCHER_C7_GPIO_MDC 3
|
||||
#define ARCHER_C7_GPIO_MDIO 4
|
||||
|
||||
static struct spi_gpio_platform_data archer_c7_v4_spi_data = {
|
||||
.sck = ARCHER_C7_GPIO_SHIFT_SRCLK,
|
||||
.miso = SPI_GPIO_NO_MISO,
|
||||
.mosi = ARCHER_C7_GPIO_SHIFT_SER,
|
||||
.num_chipselect = 1,
|
||||
};
|
||||
|
||||
static u8 archer_c7_v4_ssr_initdata __initdata = 0xff;
|
||||
|
||||
static struct gen_74x164_chip_platform_data archer_c7_v4_ssr_data = {
|
||||
.base = ARCHER_C7_74HC_GPIO_BASE,
|
||||
.num_registers = 1,
|
||||
.init_data = &archer_c7_v4_ssr_initdata,
|
||||
};
|
||||
|
||||
static struct platform_device archer_c7_v4_spi_device = {
|
||||
.name = "spi_gpio",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &archer_c7_v4_spi_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct spi_board_info archer_c7_v4_spi_info[] = {
|
||||
{
|
||||
.bus_num = 1,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 10000000,
|
||||
.modalias = "74x164",
|
||||
.platform_data = &archer_c7_v4_ssr_data,
|
||||
.controller_data = (void *) ARCHER_C7_GPIO_SHIFT_RCLK,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led archer_c7_v4_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "archer-c7-v4:green:power",
|
||||
.gpio = ARCHER_C7_GPIO_LED_POWER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:wps",
|
||||
.gpio = ARCHER_C7_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:wlan2g",
|
||||
.gpio = ARCHER_C7_GPIO_LED_WLAN2,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:wlan5g",
|
||||
.gpio = ARCHER_C7_GPIO_LED_WLAN5,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:lan1",
|
||||
.gpio = ARCHER_C7_GPIO_LED_LAN1,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:lan2",
|
||||
.gpio = ARCHER_C7_GPIO_LED_LAN2,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:lan3",
|
||||
.gpio = ARCHER_C7_GPIO_LED_LAN3,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:lan4",
|
||||
.gpio = ARCHER_C7_GPIO_LED_LAN4,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:wan",
|
||||
.gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:amber:wan",
|
||||
.gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:usb1",
|
||||
.gpio = ARCHER_C7_GPIO_LED_USB1,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "archer-c7-v4:green:usb2",
|
||||
.gpio = ARCHER_C7_GPIO_LED_USB2,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button archer_c7_v4_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "WPS and WIFI button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = ARCHER_C7_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg archer_c7_v4_ar8337_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_SGMII,
|
||||
.sgmii_delay_en = true,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data archer_c7_v4_ar8337_data = {
|
||||
.pad0_cfg = &archer_c7_v4_ar8337_pad0_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mdio_board_info archer_c7_v4_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &archer_c7_v4_ar8337_data,
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
static void __init archer_c7_v4_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1ff00008);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
spi_register_board_info(archer_c7_v4_spi_info,
|
||||
ARRAY_SIZE(archer_c7_v4_spi_info));
|
||||
|
||||
platform_device_register(&archer_c7_v4_spi_device);
|
||||
|
||||
gpio_request_one(ARCHER_C7_GPIO_SHIFT_OE,
|
||||
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
||||
"LED control");
|
||||
|
||||
gpio_request_one(ARCHER_C7_GPIO_SHIFT_SRCLR,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"LED reset");
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v4_leds_gpio),
|
||||
archer_c7_v4_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(archer_c7_v4_gpio_keys),
|
||||
archer_c7_v4_gpio_keys);
|
||||
|
||||
ath79_register_usb();
|
||||
|
||||
ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
|
||||
ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
mdiobus_register_board_info(archer_c7_v4_mdio0_info,
|
||||
ARRAY_SIZE(archer_c7_v4_mdio0_info));
|
||||
|
||||
ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
|
||||
ath79_register_pci();
|
||||
|
||||
/* GMAC0 is connected to an AR8337 switch */
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth0_data.speed = SPEED_1000;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_register_eth(0);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V4, "ARCHER-C7-V4", "TP-LINK Archer C7 v4",
|
||||
archer_c7_v4_setup);
|
||||
|
|
@ -49,6 +49,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
|
||||
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
|
||||
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
|
||||
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
|
||||
ATH79_MACH_ARDUINO_YUN, /* Yun */
|
||||
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
|
||||
ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
|
||||
|
|
|
|||
|
|
@ -200,7 +200,20 @@ define Device/tl-wdr7500-v3
|
|||
DEVICE_PROFILE := ARCHERC7
|
||||
TPLINK_HWID := 0x75000003
|
||||
endef
|
||||
TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 archer-c7-v2-il tl-wdr7500-v3
|
||||
|
||||
define Device/archer-c7-v4
|
||||
$(Device/archer-cxx)
|
||||
DEVICE_TITLE := TP-LINK Archer C7 v4
|
||||
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
||||
BOARDNAME := ARCHER-C7-V4
|
||||
TPLINK_BOARD_ID := ARCHER-C7-V4
|
||||
IMAGE_SIZE := 15104k
|
||||
LOADER_TYPE := elf
|
||||
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,1536k(kernel),13568k(rootfs),960k(config)ro,64k(art)ro,15104k@0x40000(firmware)
|
||||
SUPPORTED_DEVICES := archer-c7-v4
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 archer-c7-v2-il tl-wdr7500-v3 archer-c7-v4
|
||||
|
||||
define Device/cpe510-520-v1
|
||||
DEVICE_TITLE := TP-LINK CPE510/520 v1
|
||||
|
|
|
|||
|
|
@ -485,6 +485,49 @@ static struct device_info boards[] = {
|
|||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the C7 */
|
||||
{
|
||||
.id = "ARCHER-C7-V4",
|
||||
.support_list =
|
||||
"SupportList:\n"
|
||||
"{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
|
||||
"{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
|
||||
"{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
|
||||
.support_trail = '\x00',
|
||||
.soft_ver = "soft_ver:1.0.0\n",
|
||||
|
||||
/**
|
||||
We use a bigger os-image partition than the stock images (and thus
|
||||
smaller file-system), as our kernel doesn't fit in the stock firmware's
|
||||
1MB os-image.
|
||||
*/
|
||||
.partitions = {
|
||||
{"factory-boot", 0x00000, 0x20000},
|
||||
{"fs-uboot", 0x20000, 0x20000},
|
||||
{"os-image", 0x40000, 0x180000}, /* Stock: base 0x40000 size 0x120000 */
|
||||
{"file-system", 0x1c0000, 0xd40000}, /* Stock: base 0x160000 size 0xda0000 */
|
||||
{"default-mac", 0xf00000, 0x00200},
|
||||
{"pin", 0xf00200, 0x00200},
|
||||
{"device-id", 0xf00400, 0x00100},
|
||||
{"product-info", 0xf00500, 0x0fb00},
|
||||
{"soft-version", 0xf10000, 0x00100},
|
||||
{"extra-para", 0xf11000, 0x01000},
|
||||
{"support-list", 0xf12000, 0x0a000},
|
||||
{"profile", 0xf1c000, 0x04000},
|
||||
{"default-config", 0xf20000, 0x10000},
|
||||
{"user-config", 0xf30000, 0x40000},
|
||||
{"qos-db", 0xf70000, 0x40000},
|
||||
{"certificate", 0xfb0000, 0x10000},
|
||||
{"partition-table", 0xfc0000, 0x10000},
|
||||
{"log", 0xfd0000, 0x20000},
|
||||
{"radio", 0xff0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the C9 */
|
||||
{
|
||||
.id = "ARCHERC9",
|
||||
|
|
@ -1214,6 +1257,9 @@ static void build_image(const char *output,
|
|||
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
|
||||
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
|
||||
parts[5] = put_data("extra-para", mdat, 11);
|
||||
} else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0) {
|
||||
const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
|
||||
parts[5] = put_data("extra-para", mdat, 11);
|
||||
}
|
||||
|
||||
size_t len;
|
||||
|
|
|
|||
Loading…
Reference in New Issue