mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-01-02 04:12:29 +00:00
ath79: add support for Trendnet TEW-823DRU
Trendnet TEW-823DRU is a dual-band AC1750 router. The router is based on Qualcomm/Atheros QCA9558 + QCA9880. Specification: 720 MHz CPU 256 MB of RAM 16 MB of FLASH 3T3R 2.4 GHz 3T3R 5 GHz 5x 10/100/1000 Mbps Ethernet Firmware can be flashed from the web interface. Tested on 3 routers with no issues. Signed-off-by: Pramod Pancha <pancha@vill.com> [whitespace fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Pramod Pancha
Petr Štetiar
parent
6fde0b735c
commit
8e384ba830
@ -193,6 +193,9 @@ tplink,tl-wr842n-v2)
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
trendnet,tew-823dru)
|
||||
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
|
||||
;;
|
||||
ubnt,bullet-m|\
|
||||
ubnt,bullet-m-xw|\
|
||||
ubnt,nanostation-m|\
|
||||
|
||||
@ -64,7 +64,8 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
|
||||
;;
|
||||
buffalo,bhr-4grv2)
|
||||
buffalo,bhr-4grv2|\
|
||||
trendnet,tew-823dru)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
|
||||
;;
|
||||
@ -363,6 +364,10 @@ ath79_setup_macs()
|
||||
base_mac=$(mtd_get_mac_binary u-boot 130048)
|
||||
wan_mac=$(macaddr_add "$base_mac" 1)
|
||||
;;
|
||||
trendnet,tew-823dru)
|
||||
lan_mac=$(mtd_get_mac_text mac 4)
|
||||
wan_mac=$(mtd_get_mac_text mac 24)
|
||||
;;
|
||||
ubnt,routerstation|\
|
||||
ubnt,routerstation-pro)
|
||||
wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
|
||||
|
||||
@ -34,6 +34,14 @@ case "$board" in
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
trendnet,tew-823dru)
|
||||
# set the 2.4G interface mac address to LAN MAC
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
|
||||
# set the 5G interface mac address to WAN MAC + 1
|
||||
[ "$PHYNBR" -eq 0 ] && \
|
||||
macaddr_add "$(mtd_get_mac_text mac 24)" 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
|
||||
216
target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
Normal file
216
target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
Normal file
@ -0,0 +1,216 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9557.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "trendnet,tew-823dru", "qca,qca9558";
|
||||
model = "TRENDNET TEW-823DRU";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &system;
|
||||
led-failsafe = &system;
|
||||
led-running = &system;
|
||||
led-upgrade = &system;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_orange {
|
||||
label = "trendnet:orange:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
system: power_green {
|
||||
label = "trendnet:green:power";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
planet_green {
|
||||
label = "trendnet:green:planet";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
planet_orange {
|
||||
label = "trendnet:orange:planet";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "nvram";
|
||||
reg = <0x030000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x040000 0xef0000>;
|
||||
};
|
||||
|
||||
partition@f30000 {
|
||||
label = "lang";
|
||||
reg = <0xf30000 0x030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f60000 {
|
||||
label = "my-dlink";
|
||||
reg = <0xf60000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
mac: partition@fe0000 {
|
||||
label = "mac";
|
||||
reg = <0xfe0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
|
||||
0x10 0x81000080 /* POWER_ON_STRIP */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6 STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&phy0>;
|
||||
pll-data = <0x56000000 0x00000101 0x00001616>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-enabled = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x03000101 0x00000101 0x00001616>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
@ -775,6 +775,22 @@ define Device/rosinson_wr818
|
||||
endef
|
||||
TARGET_DEVICES += rosinson_wr818
|
||||
|
||||
define Device/trendnet_tew-823dru
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_VENDOR := Trendnet
|
||||
DEVICE_MODEL := TEW-823DRU
|
||||
DEVICE_VARIANT := v1.0R
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
||||
SUPPORTED_DEVICES += tew-823dru
|
||||
IMAGE_SIZE := 15296k
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
|
||||
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
||||
append-string 00AP135AR9558-RT-131129-00 | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
endef
|
||||
TARGET_DEVICES += trendnet_tew-823dru
|
||||
|
||||
define Device/wd_mynet-n750
|
||||
$(Device/seama)
|
||||
ATH_SOC := ar9344
|
||||
|
||||
Loading…
Reference in New Issue
Block a user