a few more dts files (WIP)

SVN-Revision: 34130
This commit is contained in:
John Crispin 2012-11-09 19:26:43 +00:00
parent a30b3066ce
commit 88e4d93802
4 changed files with 407 additions and 24 deletions

View File

@ -76,6 +76,7 @@
interrupt-parent = <&icu0>;
interrupts = <63 96>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
@ -91,34 +92,12 @@
interrupt-map = <
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
>;
gpios-reset = <&gpio 21 0>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
sflash@E100800 {
compatible = "lantiq,sflash_at45";
reg = <0xE100800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "linux";
reg = <0x20000 0x1d0000>;
};
};
gpio-keys {
compatible = "gpio-keys1";
reset {
@ -128,6 +107,7 @@
linux,code = <0x100>;
};
};
gpio-leds {
compatible = "gpio-leds";
festnetz {

View File

@ -0,0 +1,186 @@
/dts-v1/;
/include/ "danube.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "linux";
reg = <0x20000 0x7d0000>;
};
partition@7f0000 {
label = "boardconfig";
reg = <0x7f0000 0x10000>;
read-only;
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <2>;
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
"io21"; /* pci-rst */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
adsl: dsl@E116000 {
compatible = "lantiq,dsl-xway";
interrupt-parent = <&icu0>;
interrupts = <63 96>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
>;
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0x3>;
};
};
gpio-keys {
compatible = "gpio-keys1";
reset {
label = "Reset";
gpios = <&gpio 29 1>;
gpio-key,wakeup;
linux,code = <0x100>;
};
};
gpio-leds {
compatible = "gpio-leds";
power0 {
label = "power0";
gpios = <&gpio 3 1>;
default-state = "on";
};
message {
label = "message";
gpios = <&gpio 5 1>;
default-state = "on";
};
power1 {
label = "power1";
gpios = <&gpio 6 1>;
default-state = "on";
};
voice1 {
label = "voice1";
gpios = <&gpio 8 1>;
default-state = "on";
};
microphone {
label = "microphone";
gpios = <&gpiomm 3 1>;
default-state = "on";
};
wifi {
label = "wifi";
gpios = <&gpiomm 4 1>;
default-state = "on";
};
fxs1 {
label = "fxs1";
gpios = <&gpiomm 5 1>;
default-state = "on";
};
fx2 {
label = "fxs2";
gpios = <&gpiomm 6 1>;
default-state = "on";
};
fxo {
label = "fxo";
gpios = <&gpiomm 7 1>;
default-state = "on";
};
internet {
label = "internet";
gpios = <&gpiomm 8 1>;
default-state = "on";
};
voice2 {
label = "voice2";
gpios = <&gpiomm 9 1>;
default-state = "on";
};
};
};

View File

@ -0,0 +1,206 @@
/dts-v1/;
/include/ "danube.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "linux";
reg = <0x20000 0x7d0000>;
};
partition@7f0000 {
label = "boardconfig";
reg = <0x7f0000 0x10000>;
read-only;
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <2>;
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "gnt2", "req1", "req2";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
"io21"; /* pci-rst */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
adsl: dsl@E116000 {
compatible = "lantiq,dsl-xway";
interrupt-parent = <&icu0>;
interrupts = <63 96>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
>;
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0x3>;
};
};
gpio-keys {
compatible = "gpio-keys1";
reset {
label = "Reset";
gpios = <&gpio 29 1>;
gpio-key,wakeup;
linux,code = <0x100>;
};
};
gpio-leds {
compatible = "gpio-leds";
power0 {
label = "power0";
gpios = <&gpio 3 1>;
default-state = "on";
};
message {
label = "message";
gpios = <&gpio 5 1>;
default-state = "on";
};
power1 {
label = "power1";
gpios = <&gpio 6 1>;
default-state = "on";
};
voice1 {
label = "voice1";
gpios = <&gpio 8 1>;
default-state = "on";
};
microphone {
label = "microphone";
gpios = <&gpiomm 3 1>;
default-state = "on";
};
wifi {
label = "wifi";
gpios = <&gpiomm 4 1>;
default-state = "on";
};
fxs1 {
label = "fxs1";
gpios = <&gpiomm 5 1>;
default-state = "on";
};
fx2 {
label = "fxs2";
gpios = <&gpiomm 6 1>;
default-state = "on";
};
fxo {
label = "fxo";
gpios = <&gpiomm 7 1>;
default-state = "on";
};
internet {
label = "internet";
gpios = <&gpiomm 8 1>;
default-state = "on";
};
voice2 {
label = "voice2";
gpios = <&gpiomm 9 1>;
default-state = "on";
};
eth1 {
label = "eth1";
gpios = <&gpiomm 11 1>;
default-state = "on";
};
eth2 {
label = "eth2";
gpios = <&gpiomm 12 1>;
default-state = "on";
};
eth3 {
label = "eth3";
gpios = <&gpiomm 13 1>;
default-state = "on";
};
eth4 {
label = "eth4";
gpios = <&gpiomm 14 1>;
default-state = "on";
};
};
};

View File

@ -21,7 +21,7 @@ endef
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
ifeq ($(CONFIG_LINUX_3_5),y)
ifeq ($(CONFIG_LINUX_3_6),y)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(1).dtb ./$(1).dts
$(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(1).dtb
else
@ -202,14 +202,25 @@ endif
ifeq ($(CONFIG_TARGET_lantiq_xway),y)
# VR9
Image/BuildKernel/Profile/EASY80920-NAND=$(call Image/BuildKernel/Template,EASY80920-NAND)
Image/Build/Profile/EASY80920-NAND=$(call Image/Build/$(1),$(1),EASY80920-NAND)
Image/BuildKernel/Profile/EASY80920-NOR=$(call Image/BuildKernel/Template,EASY80920-NOR)
Image/Build/Profile/EASY80920-NOR=$(call Image/Build/$(1),$(1),EASY80920-NOR)
# Danube
Image/BuildKernel/Profile/ARV7525PW=$(call Image/BuildKernel/Template,ARV7525PW)
Image/Build/Profile/ARV7525PW=$(call Image/Build/$(1),$(1),ARV7525PW)
Image/BuildKernel/Profile/ARV4520PW=$(call Image/BuildKernel/Template,ARV4520PW)
Image/Build/Profile/ARV4520PW=$(call Image/Build/$(1),$(1),ARV4520PW)
Image/BuildKernel/Profile/ARV752DPW=$(call Image/BuildKernel/Template,ARV752DPW)
Image/Build/Profile/ARV752DPW=$(call Image/Build/$(1),$(1),ARV752DPW)
Image/BuildKernel/Profile/ARV752DPW22=$(call Image/BuildKernel/Template,ARV752DPW22)
Image/Build/Profile/ARV752DPW22=$(call Image/Build/$(1),$(1),ARV752DPW22)
endif
ifeq ($(CONFIG_TARGET_lantiq_vr9),y)