mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-27 00:52:36 +00:00
ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3100RPv2 http://www.netgear.com/support/product/wn3100rpv2.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This device seems to be same hardware as a WN3000RPv3 Flash instructions: - Use the Netgear WebUI to upgrade to OpenWRT using the factory image (see note below), - Use the sysupgrade image for upgrading versions from OpenWRT, - TFTP recovery procedure can be used to flash the factory image (preferred method). Note: - The WebUI may not reboot automatically, wait at least 5 minutes before powercycling the device Flashing using TFTP: - Set you IP address to 192.168.1.10/24 (no gateway) - Connect your machine to the Ethernet port - Power off the device and wait for 10 seconds, - Hold the reset button and power on the device (do not release reset), - Hold the reset button until the green light is flashing (Approx. 15s) - launch tftp, set mode to binary and connect to 192.168.1.1 - put the factory firmware image - All leds will switch off (like a power off), this is normal - Wait for the device to reboot in the new OpenWRT image (max 5 mins) - The first boot will take longer than usual. - After boot, the Device IP on the ethernet port is 192.168.1.1 Signed-off-by: Rodolphe de Saint Léger <rdesaintleger@gmail.com> [drop unneeded includes in dts, wrap commit message] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Rodolphe de Saint Léger
Sungbo Eo
parent
be89c9eec4
commit
7bc20cb614
@ -1,161 +1,8 @@
|
||||
/* This file is released into the public domain */
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7620a_netgear_wn3x00rp.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
|
||||
model = "Netgear WN3000RP v3";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_g {
|
||||
label = "green:power";
|
||||
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
power_r {
|
||||
label = "red:power";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_g {
|
||||
label = "green:client";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_r {
|
||||
label = "red:client";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_g {
|
||||
label = "green:router";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_r {
|
||||
label = "red:router";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
l_arrow {
|
||||
label = "blue:leftarrow";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
r_arrow {
|
||||
label = "blue:rightarrow";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x40000 0x7b0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&art 0x1000>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
default {
|
||||
groups = "i2c", "uartf", "spi refclk";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
8
target/linux/ramips/dts/mt7620a_netgear_wn3100rp-v2.dts
Normal file
8
target/linux/ramips/dts/mt7620a_netgear_wn3100rp-v2.dts
Normal file
@ -0,0 +1,8 @@
|
||||
/* This file is released into the public domain */
|
||||
|
||||
#include "mt7620a_netgear_wn3x00rp.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "netgear,wn3100rp-v2", "ralink,mt7620a-soc";
|
||||
model = "Netgear WN3100RP v2";
|
||||
};
|
||||
158
target/linux/ramips/dts/mt7620a_netgear_wn3x00rp.dtsi
Normal file
158
target/linux/ramips/dts/mt7620a_netgear_wn3x00rp.dtsi
Normal file
@ -0,0 +1,158 @@
|
||||
/* This file is released into the public domain */
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_g {
|
||||
label = "green:power";
|
||||
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
power_r {
|
||||
label = "red:power";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_g {
|
||||
label = "green:client";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_r {
|
||||
label = "red:client";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_g {
|
||||
label = "green:router";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_r {
|
||||
label = "red:router";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
l_arrow {
|
||||
label = "blue:leftarrow";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
r_arrow {
|
||||
label = "blue:rightarrow";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x40000 0x7b0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&art 0x1000>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
default {
|
||||
groups = "i2c", "uartf", "spi refclk";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
||||
@ -819,6 +819,22 @@ define Device/netgear_wn3000rp-v3
|
||||
endef
|
||||
TARGET_DEVICES += netgear_wn3000rp-v3
|
||||
|
||||
define Device/netgear_wn3100rp-v2
|
||||
SOC := mt7620a
|
||||
IMAGE_SIZE := 7872k
|
||||
NETGEAR_HW_ID := 29764883+8+0+32+2x2+0
|
||||
NETGEAR_BOARD_ID := WN3100RPv2
|
||||
BLOCKSIZE := 4k
|
||||
IMAGES += factory.bin
|
||||
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | \
|
||||
append-uImage-fakehdr filesystem
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | netgear-dni
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := WN3100RP
|
||||
DEVICE_VARIANT := v2
|
||||
endef
|
||||
TARGET_DEVICES += netgear_wn3100rp-v2
|
||||
|
||||
define Device/netis_wf2770
|
||||
SOC := mt7620a
|
||||
IMAGE_SIZE := 16064k
|
||||
|
||||
@ -161,7 +161,8 @@ lenovo,newifi-y1s)
|
||||
ucidef_set_led_netdev "wan" "WAN" "blue:internet" "eth0.2" "tx rx"
|
||||
;;
|
||||
netgear,ex2700|\
|
||||
netgear,wn3000rp-v3)
|
||||
netgear,wn3000rp-v3|\
|
||||
netgear,wn3100rp-v2)
|
||||
ucidef_set_led_netdev "wifi_led" "wifi" "green:router" "wlan0"
|
||||
;;
|
||||
netgear,ex3700|\
|
||||
|
||||
@ -54,6 +54,7 @@ ramips_setup_interfaces()
|
||||
netgear,ex6120|\
|
||||
netgear,ex6130|\
|
||||
netgear,wn3000rp-v3|\
|
||||
netgear,wn3100rp-v2|\
|
||||
planex,cs-qr10|\
|
||||
planex,mzk-ex300np|\
|
||||
planex,mzk-ex750np|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user