ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC
The Ubiquiti NanoBeam AC Gen1 XC (NBE-5AC-19) is an outdoor 802.11ac CPE with a waterproof casing (ultrasonically welded) and bulb shaped. Hardware: - SoC: Qualcomm Atheros QCA9558 - RAM: 128 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet: 1x GbE, AR8033 phy connected via SGMII - PSU: 24 Vdc passive PoE - WiFi 5 GHz: Qualcomm Atheros QCA988X - Buttons: 1x reset - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue - Internal antenna: 19 dBi planar Installation from stock airOS firmware: - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at https://openwrt.org/toh/ubiquiti/common Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This commit is contained in:
Daniel González Cabanelas
Petr Štetiar
parent
66071729a2
commit
73ea763c0d
|
|
@ -0,0 +1,111 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Device Tree file for Ubiquiti Nanobeam NBE-5AC-19 (XC)
|
||||
*
|
||||
* Copyright (C) 2022 Daniel González Cabanelas <dgcbueu@gmail.com>
|
||||
* based on device tree from qca9558_ubnt_powerbeam-5ac-500.dts
|
||||
*/
|
||||
|
||||
#include "qca955x_ubnt_xc.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ubnt,nanobeam-ac-xc", "ubnt,xc", "qca,qca9558";
|
||||
model = "Ubiquiti NanoBeam AC Gen1 (XC)";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
led_spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
|
||||
led_gpio: led_gpio@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <1>;
|
||||
spi-max-frequency = <10000000>;
|
||||
enable-gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
rssi0 {
|
||||
label = "blue:rssi0";
|
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
rssi1 {
|
||||
label = "blue:rssi1";
|
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
rssi2 {
|
||||
label = "blue:rssi2";
|
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
rssi3 {
|
||||
label = "blue:rssi3";
|
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
led_power: power {
|
||||
label = "blue:power";
|
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <4>;
|
||||
phy4: ethernet-phy@4 {
|
||||
phy-mode = "sgmii";
|
||||
reg = <4>;
|
||||
at803x-override-sgmii-link-check;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-reg = <0 0x48 0>;
|
||||
pll-data = <0x03000000 0x00000101 0x00001313>;
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy4>;
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
};
|
||||
|
|
@ -414,6 +414,7 @@ trendnet,tew-823dru)
|
|||
ubnt,bullet-ac|\
|
||||
ubnt,nanobeam-ac|\
|
||||
ubnt,nanobeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac-xc|\
|
||||
ubnt,nanostation-ac|\
|
||||
ubnt,powerbeam-5ac-gen2)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
|
|
|||
|
|
@ -85,6 +85,7 @@ ath79_setup_interfaces()
|
|||
ubnt,lap-120|\
|
||||
ubnt,litebeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac|\
|
||||
ubnt,nanobeam-ac-xc|\
|
||||
ubnt,nanobridge-m|\
|
||||
ubnt,nanostation-ac-loco|\
|
||||
ubnt,nanostation-loco-m|\
|
||||
|
|
@ -714,6 +715,7 @@ ath79_setup_macs()
|
|||
;;
|
||||
ubnt,litebeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac-xc|\
|
||||
ubnt,powerbeam-5ac-500|\
|
||||
ubnt,powerbeam-5ac-gen2)
|
||||
label_mac=$(mtd_get_mac_binary art 0x5006)
|
||||
|
|
|
|||
|
|
@ -37,6 +37,7 @@ case "$FIRMWARE" in
|
|||
ubnt,litebeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac|\
|
||||
ubnt,nanobeam-ac-gen2|\
|
||||
ubnt,nanobeam-ac-xc|\
|
||||
ubnt,nanostation-ac|\
|
||||
ubnt,nanostation-ac-loco|\
|
||||
ubnt,powerbeam-5ac-500|\
|
||||
|
|
|
|||
|
|
@ -246,6 +246,15 @@ define Device/ubnt_nanobeam-ac-gen2
|
|||
endef
|
||||
TARGET_DEVICES += ubnt_nanobeam-ac-gen2
|
||||
|
||||
define Device/ubnt_nanobeam-ac-xc
|
||||
$(Device/ubnt-xc)
|
||||
SOC := qca9558
|
||||
DEVICE_MODEL := NanoBeam AC
|
||||
DEVICE_VARIANT := Gen1 (XC)
|
||||
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_nanobeam-ac-xc
|
||||
|
||||
define Device/ubnt_nanobridge-m
|
||||
$(Device/ubnt-xm)
|
||||
SOC := ar7241
|
||||
|
|
|
|||
Loading…
Reference in New Issue