kirkwood: refresh 6.6 patches

Removed upstream merged:
002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch

Manually refreshed:
100-ib62x0.patch
101-iconnect.patch
102-dockstar.patch
103-iomega-ix2-200.patch
105-linksys-viper-dts.patch
106-goflexnet.patch
107-01-zyxel-nsa3x0-common-nand-partitions.patch
107-03-nsa325.patch
109-pogoplug_v4.patch
110-pogo_e02.patch
111-l-50.patch
112-sheevaplug.patch
113-readynas_duo_v2.patch
114-ctera-c-200-v1.patch
115-nsa310s.patch
116-4i-edge-200.patch
117-netgear_stora.patch
203-blackarmor-nas220.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

target/linux/kirkwood/patches-6.6/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch

@@ -1,301 +0,0 @@
-From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sat, 29 Oct 2022 22:57:38 +0200
-Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board
-
-Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
-
-Specification:
- - Processor Marvell 88F6702 1 GHz
- - 256MB RAM
- - 128MB NAND
- - 1x GBE LAN port (PHY: Marvell 88E1318)
- - 2x USB 2.0
- - 1x SATA
- - 3x button
- - 7x leds
- - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
-
-Tested-by: Tony Dinh <mibodhi@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Acked-by: Adam Baker <linux@baker-net.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile             |   1 +
- arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++
- 2 files changed, 260 insertions(+)
- create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -356,6 +356,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-nsa320.dtb \
- 	kirkwood-nsa325.dtb \
- 	kirkwood-openblocks_a6.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,259 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * ZyXEL NSA310S Board Description
-+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
-+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
-+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
-+ * Based upon the board setup file created by Peter Schildmann
-+ */
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	model = "ZyXEL NSA310S";
-+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = &uart0;
-+	};
-+
-+	gpio_poweroff {
-+		compatible = "gpio-poweroff";
-+		pinctrl-0 = <&pmx_pwr_off>;
-+		pinctrl-names = "default";
-+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_buttons>;
-+		pinctrl-names = "default";
-+
-+		power {
-+			label = "Power Button";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		copy {
-+			label = "Copy Button";
-+			linux,code = <KEY_COPY>;
-+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		reset {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&pmx_leds>;
-+		pinctrl-names = "default";
-+
-+		led-1 {
-+			function = LED_FUNCTION_DISK_ERR;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-2 {
-+			function = LED_FUNCTION_USB;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "usb-host";
-+		};
-+
-+		led-3 {
-+			function = LED_FUNCTION_DISK;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ata1";
-+		};
-+
-+		led-4 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-5 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-6 {
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		led-7 {
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	usb0_power: regulator@1 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "USB Power";
-+
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-always-on;
-+		regulator-boot-on;
-+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	sata1_power: regulator@2 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "SATA1 Power";
-+
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-always-on;
-+		regulator-boot-on;
-+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	thermal-zones {
-+		disk-thermal {
-+			polling-delay = <20000>;
-+			polling-delay-passive = <2000>;
-+
-+			thermal-sensors = <&hdd_temp>;
-+
-+			trips {
-+				disk_alert: disk-alert {
-+					temperature = <40000>;
-+					hysteresis = <5000>;
-+					type = "active";
-+				};
-+				disk_crit: disk-crit {
-+					temperature = <60000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	rtc@68 {
-+		compatible = "htk,ht1382";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@1 {
-+		reg = <1>;
-+		phy-mode = "rgmii-id";
-+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+				   <0x1 0x10 0x0 0x1017>,
-+				   <0x1 0x11 0x0 0x4408>,
-+				   <0x1 0x16 0x0 0x0>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	chip-delay = <35>;
-+
-+	partition@0 {
-+		label = "uboot";
-+		reg = <0x0000000 0x00c0000>;
-+		read-only;
-+	};
-+	partition@c0000 {
-+		label = "uboot_env";
-+		reg = <0x00c0000 0x0080000>;
-+	};
-+	partition@140000 {
-+		label = "ubi";
-+		reg = <0x0140000 0x7ec0000>;
-+	};
-+};
-+
-+&pciec {
-+	status = "okay";
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	pinctrl-names = "default";
-+
-+	pmx_buttons: pmx-buttons {
-+		marvell,pins = "mpp24", "mpp25", "mpp26";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_leds: pmx-leds {
-+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
-+						"mpp28", "mpp29";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_power: pmx-power {
-+		marvell,pins = "mpp21", "mpp33";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_pwr_off: pmx-pwr-off {
-+		marvell,pins = "mpp27";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&rtc {
-+	status = "disabled";
-+};
-+
-+&sata {
-+	status = "okay";
-+	nr-ports = <1>;
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	hdd_temp: sata-port@0 {
-+		reg = <0>;
-+		#thermal-sensor-cells = <0>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};

target/linux/kirkwood/patches-6.6/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch

@@ -1,249 +0,0 @@
-From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Mon, 3 Oct 2022 09:34:43 +0200
-Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board
-
-Add Endian 4i Edge 200 is 5-port firewall.
-It have also clone: Endian UTM Mini (The same hardware, with added WLAN
-card).
-
-Hardware:
-  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
-  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
-  - NAND Flash: 512MB (Micron 29F4G08AAC)
-  - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
-  - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
-  - Storage: MicroSD Slot
-  - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
-          (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
-  - USB: 1x USB 2.0 port
-  - Console: RJ-45 port
-  - LEDs: 3x GPIO controlled
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile                 |   1 +
- arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++
- 2 files changed, 206 insertions(+)
- create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -300,6 +300,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
- 	keystone-k2g-evm.dtb \
- 	keystone-k2g-ice.dtb
- dtb-$(CONFIG_MACH_KIRKWOOD) += \
-+	kirkwood-4i-edge-200.dtb \
- 	kirkwood-b3.dtb \
- 	kirkwood-blackarmor-nas220.dtb \
- 	kirkwood-c200-v1.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
-@@ -0,0 +1,205 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Endian 4i Edge 200 Board Description
-+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
-+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	model = "Endian 4i Edge 200";
-+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x20000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8";
-+		stdout-path = &uart0;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&pmx_led>;
-+		pinctrl-names = "default";
-+
-+		led-1 {
-+			function = LED_FUNCTION_SD;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "mmc0";
-+		};
-+
-+		led-2 {
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-3 {
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+};
-+
-+&eth0port {
-+	speed = <1000>;
-+	duplex = <1>;
-+};
-+
-+&eth1 {
-+	status = "okay";
-+};
-+
-+&eth1port {
-+	phy-handle = <&ethphyb>;
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphyb: ethernet-phy@b {
-+		reg = <0x0b>;
-+
-+		marvell,reg-init =
-+			/* link-activity, bi-color mode 4 */
-+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
-+	};
-+
-+	switch0: switch@11 {
-+		compatible = "marvell,mv88e6085";
-+		reg = <0x11>;
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			port@0 {
-+				reg = <0>;
-+				label = "port1";
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "port2";
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "port3";
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "port4";
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				phy-mode = "rgmii-id";
-+				ethernet = <&eth0port>;
-+
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x00000000 0x000a0000>;
-+		read-only;
-+	};
-+
-+	partition@a0000 {
-+		label = "u-boot-env";
-+		reg = <0x000a0000 0x00060000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "kernel";
-+		reg = <0x00100000 0x00400000>;
-+	};
-+
-+	partition@500000 {
-+		label = "ubi";
-+		reg = <0x00500000 0x1fb00000>;
-+	};
-+};
-+
-+&pciec {
-+	status = "okay";
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	pinctrl-0 = <&pmx_sysrst>;
-+	pinctrl-names = "default";
-+
-+	pmx_sysrst: pmx-sysrst {
-+		marvell,pins = "mpp6";
-+		marvell,function = "sysrst";
-+	};
-+
-+	pmx_sdio_cd: pmx-sdio-cd {
-+		marvell,pins = "mpp28";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led: pmx-led {
-+		marvell,pins = "mpp34", "mpp35", "mpp49";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&rtc {
-+	status = "okay";
-+};
-+
-+&sata_phy0 {
-+	status = "disabled";
-+};
-+
-+&sata_phy1 {
-+	status = "disabled";
-+};
-+
-+&sdio {
-+	pinctrl-0 = <&pmx_sdio_cd>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+	cd-gpios = <&gpio0 28 9>;
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&usb0 {
-+	status = "okay";
-+};

target/linux/kirkwood/patches-6.6/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch

@@ -1,108 +0,0 @@
-From 8aea8659a5f3ae8dc63c9f632ce1f676a1483556 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Fri, 7 Apr 2023 17:17:20 +0200
-Subject: [PATCH] ARM: dts: kirkwood: Add missing phy-mode and fixed links
-
-The DSA framework has got more picky about always having a phy-mode
-for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
-switch to impose the RGMII delays.
-
-Additionally, the cpu label has never actually been used in the
-binding, so remove it.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/kirkwood-dir665.dts          | 3 ++-
- arch/arm/boot/dts/kirkwood-l-50.dts            | 2 +-
- arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 3 ++-
- arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 3 ++-
- arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 2 +-
- 5 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/kirkwood-dir665.dts
-+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
-@@ -232,7 +232,7 @@
- 
- 			port@6 {
- 				reg = <6>;
--				label = "cpu";
-+				phy-mode = "rgmii-id";
- 				ethernet = <&eth0port>;
- 				fixed-link {
- 					speed = <1000>;
-@@ -251,6 +251,7 @@
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
-+		phy-mode = "rgmii";
- 	};
- };
- 
---- a/arch/arm/boot/dts/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
-@@ -254,7 +254,6 @@
- 
- 			port@6 {
- 				reg = <6>;
--				label = "cpu";
- 				phy-mode = "rgmii-id";
- 				ethernet = <&eth1port>;
- 				fixed-link {
-@@ -330,6 +329,7 @@
- 	ethernet1-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
-+		phy-mode = "rgmii";
- 	};
- };
- 
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -198,7 +198,7 @@
- 
- 			port@5 {
- 				reg = <5>;
--				label = "cpu";
-+				phy-mode = "rgmii-id";
- 				ethernet = <&eth0port>;
- 				fixed-link {
- 					speed = <1000>;
-@@ -221,6 +221,7 @@
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
-+		phy-mode = "rgmii";
- 	};
- };
- 
---- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
-+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
-@@ -149,7 +149,7 @@
- 
- 			port@5 {
- 				reg = <5>;
--				label = "cpu";
-+				phy-mode = "rgmii-id";
- 				ethernet = <&eth0port>;
- 				fixed-link {
- 					speed = <1000>;
-@@ -166,6 +166,7 @@
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
-+		phy-mode = "rgmii";
- 	};
- };
- 
---- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
-@@ -105,7 +105,7 @@
- 
- 			port@5 {
- 				reg = <5>;
--				label = "cpu";
-+				phy-mode = "rgmii-id";
- 				ethernet = <&eth0port>;
- 				fixed-link {
- 					speed = <1000>;

target/linux/kirkwood/patches-6.6/005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch

@@ -1,89 +0,0 @@
-From b3f1a164c7f742503dc7159011f7ad6b092b660e Mon Sep 17 00:00:00 2001
-From: Greg Ungerer <gerg@kernel.org>
-Date: Fri, 24 Nov 2023 14:15:28 +1000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix marvell 6350 switch probing
-
-As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
-be filled") Marvell 88e6350 switches fail to be probed:
-
-    ...
-    mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
-    mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces
-    error creating PHYLINK: -22
-    mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22
-    ...
-
-The problem stems from the use of mv88e6185_phylink_get_caps() to get
-the device capabilities. Create a new dedicated phylink_get_caps for the
-6351 family (which the 6350 is one of) to properly support their set of
-capabilities.
-
-According to chip.h the 6351 switch family includes the 6171, 6175, 6350
-and 6351 switches, so update each of these to use the correct
-phylink_get_caps.
-
-Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
-Signed-off-by: Greg Ungerer <gerg@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++----
- 1 file changed, 16 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -652,6 +652,18 @@ static void mv88e6250_phylink_get_caps(s
- 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
- }
- 
-+static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
-+				       struct phylink_config *config)
-+{
-+	unsigned long *supported = config->supported_interfaces;
-+
-+	/* Translate the default cmode */
-+	mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
-+
-+	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
-+				   MAC_1000FD;
-+}
-+
- static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
- {
- 	u16 reg, val;
-@@ -4498,7 +4510,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6172_ops = {
-@@ -4599,7 +4611,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6176_ops = {
-@@ -5256,7 +5268,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6351_ops = {
-@@ -5302,7 +5314,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
- 	.avb_ops = &mv88e6352_avb_ops,
- 	.ptp_ops = &mv88e6352_ptp_ops,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6352_ops = {

target/linux/kirkwood/patches-6.6/100-ib62x0.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
 @@ -6,7 +6,14 @@
  
  / {

target/linux/kirkwood/patches-6.6/101-iconnect.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
 @@ -8,6 +8,13 @@
  	model = "Iomega Iconnect";
  	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/102-dockstar.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
 @@ -8,6 +8,13 @@
  	model = "Seagate FreeAgent Dockstar";
  	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
 @@ -8,6 +8,13 @@
  	model = "Iomega StorCenter ix2-200";
  	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
 @@ -24,6 +24,10 @@
  	};
  

target/linux/kirkwood/patches-6.6/106-goflexnet.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
 @@ -8,6 +8,13 @@
  	model = "Seagate GoFlex Net";
  	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
 @@ -112,40 +112,16 @@
  
  	partition@0 {

target/linux/kirkwood/patches-6.6/107-03-nsa325.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
 @@ -15,6 +15,13 @@
  	model = "ZyXEL NSA325";
  	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
 @@ -18,12 +18,20 @@
  	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
  		     "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/110-pogo_e02.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
 @@ -20,6 +20,13 @@
  	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
  		     "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/111-l-50.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-l-50.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
 @@ -18,6 +18,13 @@
  		reg = <0x00000000 0x20000000>;
  	};

target/linux/kirkwood/patches-6.6/112-sheevaplug.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
++++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
 @@ -78,13 +78,8 @@
  	};
  
@@ -16,8 +16,8 @@
  	};
  };
  
---- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
 @@ -13,6 +13,13 @@
  	model = "Globalscale Technologies SheevaPlug";
  	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
 @@ -19,6 +19,13 @@
  		reg = <0x00000000 0x10000000>;
  	};

target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
-+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
 @@ -14,6 +14,14 @@
  	model = "Ctera C200 V1";
  	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/115-nsa310s.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa310s.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
 @@ -16,6 +16,13 @@
  	model = "ZyXEL NSA310S";
  	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";

target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
-+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
 @@ -20,6 +20,13 @@
  		reg = <0x00000000 0x20000000>;
  	};

target/linux/kirkwood/patches-6.6/117-netgear_stora.patch

@@ -1,6 +1,6 @@
---- a/arch/arm/boot/dts/Makefile
+--- a/arch/arm/boot/dts/marvell/Makefile
-+++ b/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/marvell/Makefile
-@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+@@ -157,6 +157,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
  	kirkwood-rs411.dtb \
  	kirkwood-sheevaplug.dtb \
  	kirkwood-sheevaplug-esata.dtb \

target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch

@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
-+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
 @@ -17,6 +17,13 @@
  	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
  		     "marvell,kirkwood";