mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-26 00:22:47 +00:00
mvebu: add support for ipTIME NAS1dual
ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Sungbo Eo
parent
f4fd2a1354
commit
6ff970bb51
@ -18,6 +18,9 @@ mvebu_setup_interfaces()
|
||||
cznic,turris-omnia)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2"
|
||||
;;
|
||||
iptime,nas1dual)
|
||||
ucidef_set_interface_lan "eth0 eth1" "dhcp"
|
||||
;;
|
||||
linksys,wrt1200ac|\
|
||||
linksys,wrt1900ac-v1|\
|
||||
linksys,wrt1900ac-v2|\
|
||||
|
||||
@ -5,6 +5,8 @@
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv strings'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
|
||||
@ -0,0 +1,318 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||||
/*
|
||||
* Device Tree file for ipTIME NAS1dual
|
||||
*
|
||||
* Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
|
||||
*
|
||||
* Based on armada-385-linksys.dtsi
|
||||
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "armada-385.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ipTIME NAS1dual";
|
||||
compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_ready;
|
||||
led-failsafe = &led_ready;
|
||||
led-running = &led_ready;
|
||||
led-upgrade = &led_ready;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x80000000>; /* 2GB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
||||
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_keys_pins>;
|
||||
|
||||
power {
|
||||
label = "Power Button";
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
copy {
|
||||
label = "USB Copy Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_leds_pins>;
|
||||
|
||||
led_ready: ready {
|
||||
label = "blue:ready";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd {
|
||||
label = "blue:hdd";
|
||||
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "blue:usb";
|
||||
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
||||
trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_fan_pins>;
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
/* We don't know the exact rpm, just use dummy values here. */
|
||||
gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sata_power_pins>;
|
||||
|
||||
reg_sata_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "sata-power";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ahci0 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sata-port@0 {
|
||||
reg = <0>;
|
||||
target-supply = <®_sata_power>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&bm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&bm_bppi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ge0_rgmii_pins>;
|
||||
status = "okay";
|
||||
phy-handle = <ðphy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <0>;
|
||||
bm,pool-short = <1>;
|
||||
nvmem-cells = <&macaddr_uboot_fffa8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ð1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
status = "okay";
|
||||
phy-handle = <ðphy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <2>;
|
||||
bm,pool-short = <3>;
|
||||
nvmem-cells = <&macaddr_uboot_fffa8>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
pca9536: gpio@41 {
|
||||
compatible = "nxp,pca9536";
|
||||
reg = <0x41>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "power-led", "power-board";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
/* LED1: On - Link, Blink - Activity, Off - No Link */
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
marvell,reg-init = <3 16 0 0x1017>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
marvell,reg-init = <3 16 0 0x1017>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio_keys_pins: gpio-keys-pins {
|
||||
marvell,pins = "mpp24", "mpp26", "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
gpio_leds_pins: gpio-leds-pins {
|
||||
marvell,pins = "mpp18", "mpp20", "mpp51";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
gpio_fan_pins: gpio-fan-pins {
|
||||
marvell,pins = "mpp25", "mpp50";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata_power_pins: sata-power-pins {
|
||||
marvell,pins = "mpp52";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
uart1_pins_alt: uart-pins-1-alt {
|
||||
marvell,pins = "mpp45", "mpp46";
|
||||
marvell,function = "ua1";
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x00000000 0x00100000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_uboot_fffa8: macaddr@fffa8 {
|
||||
reg = <0xfffa8 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
reg = <0x00100000 0x03ec0000>;
|
||||
label = "firmware";
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x00000000 0x00600000>;
|
||||
label = "kernel";
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
reg = <0x00600000 0x038c0000>;
|
||||
label = "rootfs";
|
||||
};
|
||||
};
|
||||
|
||||
partition@3fc0000 {
|
||||
reg = <0x03fc0000 0x00040000>;
|
||||
label = "config";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins_alt>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb3_0_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_0_port2: port@2 {
|
||||
reg = <2>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
@ -78,6 +78,20 @@ define Device/globalscale_mirabox
|
||||
endef
|
||||
TARGET_DEVICES += globalscale_mirabox
|
||||
|
||||
define Device/iptime_nas1dual
|
||||
DEVICE_VENDOR := ipTIME
|
||||
DEVICE_MODEL := NAS1dual
|
||||
DEVICE_PACKAGES := kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb3
|
||||
SOC := armada-385
|
||||
KERNEL := kernel-bin | append-dtb | iptime-naspkg nas1dual
|
||||
KERNEL_SIZE := 6144k
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE_SIZE := 64256k
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += iptime_nas1dual
|
||||
|
||||
define Device/kobol_helios4
|
||||
DEVICE_VENDOR := Kobol
|
||||
DEVICE_MODEL := Helios4
|
||||
|
||||
Loading…
Reference in New Issue
Block a user