diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 4fb1af8218..dca6f43003 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -71,6 +71,9 @@ zyxel,ex5601-t0) local envdev=/dev/mtd$(find_mtd_index "u-boot-env") ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2" ;; +zyxel,ex5700-telenor) + ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1" + ;; esac config_load ubootenv diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts new file mode 100644 index 0000000000..b6bd746ef3 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include + +#include "mt7986a.dtsi" + +/ { + model = "ZyXEL EX5700 (Telenor)"; + compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + led-boot = &led_status_green; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_amber; + }; + + chosen { + stdout-path = "serial0:115200n8"; + + // Stock U-Boot crashes unless /chosen/bootargs exists + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + reset-button { + label = "reset"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps-button { + label = "wps"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + red1 { + label = "red:net"; + gpios = <&pio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1 { + label = "green:net"; + gpios = <&pio 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + amber1 { + label = "amber:net"; + gpios = <&pio 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + white2 { + label = "white:status"; + gpios = <&pio 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2 { + label = "red:status"; + gpios = <&pio 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led_status_green: green2 { + label = "green:status"; + gpios = <&pio 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led_status_amber: amber2 { + label = "amber:status"; + gpios = <&pio 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + +}; + +ð { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + label = "wan"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-delay-us = <50000>; + reset-post-delay-us = <20000>; + + phy5: phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <5>; + }; + + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + }; + + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0xa0000>; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wf_5g_pins>; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&pio { + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "switch_int", "mdc_mdio"; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_pereset"; // "pcie_clk" and "pcie_wake" is unused? + }; + }; + + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_5g_pins: wf_5g-pins { + mux { + function = "wifi"; + groups = "wf_5g"; + }; + conf { + pins = "WF1_HB1", "WF1_HB2", "WF1_HB3", "WF1_HB4", + "WF1_HB0", "WF1_HB5", "WF1_HB6", "WF1_HB7", + "WF1_HB8", "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + cs-gpios = <0>, <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + + flash@1 { + compatible = "spi-nand"; + reg = <1>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + spi-max-frequency = <20000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x000000 0x100000>; + read-only; + }; + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + }; + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + partition@580000 { + label = "ubi"; + reg = <0x580000 0x1da80000>; + }; + }; + }; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount new file mode 100644 index 0000000000..c52d004c63 --- /dev/null +++ b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount @@ -0,0 +1,12 @@ +#!/bin/sh /etc/rc.common +# SPDX-License-Identifier: GPL-2.0-only + +START=99 + +boot() { + case $(board_name) in + zyxel,ex5700-telenor) + fw_setenv uboot_bootcount 0 + ;; + esac +} diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index e008c23c0a..c3300201cf 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -509,6 +509,20 @@ define Device/zyxel_ex5601-t0-stock endef TARGET_DEVICES += zyxel_ex5601-t0-stock +define Device/zyxel_ex5700-telenor + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := EX5700 (Telenor) + DEVICE_DTS := mt7986a-zyxel-ex5700-telenor + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zyxel_ex5700-telenor + define Device/zyxel_nwa50ax-pro DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NWA50AX Pro