bcm53xx: add support for Phicomm K3
Hardware specifications: - CPU: Broadcom BCM4709C0 @1.4GHz (Dual-Core ARM) - RAM: 512 MB (DDR3) - Flash: 128 MB (NAND) - LAN ports: 3, LAN speed: 10/100/1000 - WAN ports: 1, WAN speed: 10/100/1000 - 2.4G: BCM4366 4x4 MIMO 1000Mbps -- Skyworks SE2623L 2.4GHz Power Amplifier (x4) - 5G: BCM4366 4x4 MIMO 2167Mbps -- RFMD RFPA5542 5GHz Power Amplifier Module (x4) - USB: 1x USB 3.0 port - 1x LED, 1x reset button, 1x power switch - 1x system status touch screen Flash: - Enter CFE - Upload the trx file - Reboot Signed-off-by: Hao Dong <halbertdong@gmail.com>
This commit is contained in:
Hao Dong
Rafał Miłecki
parent
3ccc0fdd9c
commit
62dadcb86c
|
|
@ -24,6 +24,12 @@ buffalo,wzr-1750dhp)
|
|||
board_config_flush
|
||||
exit 0
|
||||
;;
|
||||
phicomm,k3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:wan" "5@eth0"
|
||||
board_config_flush
|
||||
exit 0
|
||||
;;
|
||||
esac
|
||||
|
||||
wan_macaddr="$(nvram get wan_hwaddr)"
|
||||
|
|
|
|||
|
|
@ -313,6 +313,13 @@ define Device/smartrg-sr400ac
|
|||
endef
|
||||
TARGET_DEVICES += smartrg-sr400ac
|
||||
|
||||
define Device/phicomm-k3
|
||||
DEVICE_TITLE := PHICOMM K3
|
||||
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
||||
IMAGES := trx
|
||||
endef
|
||||
TARGET_DEVICES += phicomm-k3
|
||||
|
||||
define Device/tenda-ac9
|
||||
DEVICE_TITLE := Tenda AC9
|
||||
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,114 @@
|
|||
From 8ab0ea8e9275c03f253f84dc83ee86cdbeb1fcf4 Mon Sep 17 00:00:00 2001
|
||||
From: Hao Dong <halbertdong@gmail.com>
|
||||
Date: Sat, 19 Jan 2019 17:25:29 +0000
|
||||
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
|
||||
|
||||
This router has BCM4709C0, 128MB NAND flash (MX30LF1G18AC-TI),
|
||||
and 512MB memory, with 3 x LAN and 1 x WAN. WL chips are
|
||||
BCM4366C0 x 2. The router has a small LCD and 3 capactive keys
|
||||
driven by a PIC microcontroller, which is in turn wired to
|
||||
UART1 of main board.
|
||||
|
||||
Everything except the LCD works. Hamster has activated LCD through
|
||||
UART1, but further programming, i.e., a independent package, is
|
||||
required to make sure its working properly.
|
||||
|
||||
Since the firmware of Broadcom 4366c0 has been provided by
|
||||
openwrt.org, now its wireless is functional but limited. The
|
||||
"official" firmware cannot work properly in some 5G Hz channel.
|
||||
|
||||
Signed-off-by: Hao Dong <halbertdong@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 1 +
|
||||
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 75 +++++++++++++++++++++++
|
||||
2 files changed, 76 insertions(+)
|
||||
create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm47094-luxul-xwr-3100.dtb \
|
||||
bcm47094-luxul-xwr-3150-v1.dtb \
|
||||
bcm47094-netgear-r8500.dtb \
|
||||
+ bcm47094-phicomm-k3.dtb \
|
||||
bcm94708.dtb \
|
||||
bcm94709.dtb \
|
||||
bcm953012er.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
|
||||
@@ -0,0 +1,75 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
+/*
|
||||
+* Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
|
||||
+* Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
|
||||
+*/
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "bcm47094.dtsi"
|
||||
+#include "bcm5301x-nand-cs0-bch4.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
|
||||
+ model = "Phicomm K3";
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x00000000 0x08000000
|
||||
+ 0x88000000 0x18000000>;
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ restart {
|
||||
+ label = "Reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb3_phy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&nandcs {
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "boot";
|
||||
+ reg = <0x0000000 0x0080000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@80000 {
|
||||
+ label = "nvram";
|
||||
+ reg = <0x0080000 0x0100000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@180000{
|
||||
+ label = "phicomm";
|
||||
+ reg = <0x0180000 0x0280000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@400000 {
|
||||
+ label = "firmware";
|
||||
+ reg = <0x0400000 0x7C00000>;
|
||||
+ compatible = "brcm,trx";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
From 8ab0ea8e9275c03f253f84dc83ee86cdbeb1fcf4 Mon Sep 17 00:00:00 2001
|
||||
From: Hao Dong <halbertdong@gmail.com>
|
||||
Date: Sat, 19 Jan 2019 17:25:29 +0000
|
||||
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
|
||||
|
||||
This router has BCM4709C0, 128MB NAND flash (MX30LF1G18AC-TI),
|
||||
and 512MB memory, with 3 x LAN and 1 x WAN. WL chips are
|
||||
BCM4366C0 x 2. The router has a small LCD and 3 capactive keys
|
||||
driven by a PIC microcontroller, which is in turn wired to
|
||||
UART1 of main board.
|
||||
|
||||
Everything except the LCD works. Hamster has activated LCD through
|
||||
UART1, but further programming, i.e., a independent package, is
|
||||
required to make sure its working properly.
|
||||
|
||||
Since the firmware of Broadcom 4366c0 has been provided by
|
||||
openwrt.org, now its wireless is functional but limited. The
|
||||
"official" firmware cannot work properly in some 5G Hz channel.
|
||||
|
||||
Signed-off-by: Hao Dong <halbertdong@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 1 +
|
||||
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 75 +++++++++++++++++++++++
|
||||
2 files changed, 76 insertions(+)
|
||||
create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm47094-luxul-xwr-3100.dtb \
|
||||
bcm47094-luxul-xwr-3150-v1.dtb \
|
||||
bcm47094-netgear-r8500.dtb \
|
||||
+ bcm47094-phicomm-k3.dtb \
|
||||
bcm94708.dtb \
|
||||
bcm94709.dtb \
|
||||
bcm953012er.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
|
||||
@@ -0,0 +1,75 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
+/*
|
||||
+* Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
|
||||
+* Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
|
||||
+*/
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "bcm47094.dtsi"
|
||||
+#include "bcm5301x-nand-cs0-bch4.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
|
||||
+ model = "Phicomm K3";
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ reg = <0x00000000 0x08000000
|
||||
+ 0x88000000 0x18000000>;
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ restart {
|
||||
+ label = "Reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb3_phy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&nandcs {
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "boot";
|
||||
+ reg = <0x0000000 0x0080000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@80000 {
|
||||
+ label = "nvram";
|
||||
+ reg = <0x0080000 0x0100000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@180000{
|
||||
+ label = "phicomm";
|
||||
+ reg = <0x0180000 0x0280000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@400000 {
|
||||
+ label = "firmware";
|
||||
+ reg = <0x0400000 0x7C00000>;
|
||||
+ compatible = "brcm,trx";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
Loading…
Reference in New Issue