mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-02-09 16:18:38 +00:00
ath79: Add support for Plasma Cloud PA300
Device specifications:
* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
- eth0
+ Label: Ethernet 1
+ 24V passive POE (mode B)
+ used as WAN interface
- eth1
+ Label: Ethernet 2
+ 802.3af POE
+ builtin switch port 2
+ used as LAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Sven Eckelmann
Petr Štetiar
parent
727eebbad1
commit
5fc28ef479
@ -81,6 +81,9 @@ netgear,wndr4300tn|\
|
||||
netgear,wndr4300sw)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
|
||||
;;
|
||||
plasmacloud,pa300)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
||||
;;
|
||||
qihoo,c301)
|
||||
ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
#
|
||||
|
||||
usage() {
|
||||
echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62> <out file path> <kernel path> <rootfs path>"
|
||||
echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>"
|
||||
rm -f $CFG_OUT
|
||||
exit 1
|
||||
}
|
||||
@ -20,6 +20,7 @@ KERNEL_PATH=$3
|
||||
ROOTFS_PATH=$4
|
||||
|
||||
case $CE_TYPE in
|
||||
PA300|\
|
||||
OM2P)
|
||||
MAX_PART_SIZE=7168
|
||||
KERNEL_FLASH_ADDR=0x1c0000
|
||||
|
||||
8
target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
Normal file
8
target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
Normal file
@ -0,0 +1,8 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9533_plasmacloud_pa300.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "plasmacloud,pa300", "qca,qca9533";
|
||||
model = "Plasma Cloud PA300";
|
||||
};
|
||||
140
target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
Normal file
140
target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
Normal file
@ -0,0 +1,140 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
/delete-property/ bootargs;
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_green;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_green;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
status_red {
|
||||
label = "red:status";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_green: status_green {
|
||||
label = "green:status";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "linux,wdt-gpio";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
hw_algo = "toggle";
|
||||
/* hw_margin_ms is actually 300s but driver limits it to 60s */
|
||||
hw_margin_ms = <60000>;
|
||||
always-running;
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
/* partitions are passed via bootloader */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x040000>;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "custom";
|
||||
reg = <0x080000 0x140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1c0000 {
|
||||
label = "inactive";
|
||||
reg = <0x1c0000 0x700000>;
|
||||
};
|
||||
|
||||
partition@8c0000 {
|
||||
label = "inactive2";
|
||||
reg = <0x8c0000 0x700000>;
|
||||
};
|
||||
|
||||
art: partition@fc0000 {
|
||||
label = "ART";
|
||||
reg = <0xfc0000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
/* Workaround: keep the Ethernet interfaces order/mapping correct
|
||||
* (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
|
||||
*/
|
||||
compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
};
|
||||
@ -149,6 +149,7 @@ ath79_setup_interfaces()
|
||||
comfast,cf-e120a-v3|\
|
||||
comfast,cf-e314n-v2|\
|
||||
compex,wpj531-16m|\
|
||||
plasmacloud,pa300|\
|
||||
tplink,cpe210-v1|\
|
||||
tplink,cpe220-v2|\
|
||||
tplink,cpe220-v3|\
|
||||
|
||||
@ -0,0 +1,104 @@
|
||||
# The U-Boot loader with the datachk patchset for dualbooting requires image
|
||||
# sizes and checksums to be provided in the U-Boot environment.
|
||||
# The devices come with 2 main partitions - while one is active
|
||||
# sysupgrade will flash the other. The boot order is changed to boot the
|
||||
# newly flashed partition. If the new partition can't be booted due to
|
||||
# upgrade failures the previously used partition is loaded.
|
||||
|
||||
platform_do_upgrade_dualboot_datachk() {
|
||||
local tar_file="$1"
|
||||
local restore_backup
|
||||
local primary_kernel_mtd
|
||||
|
||||
local setenv_script="/tmp/fw_env_upgrade"
|
||||
|
||||
local inactive_mtd="$(find_mtd_index $PART_NAME)"
|
||||
local inactive_offset="$(cat /sys/class/mtd/mtd${inactive_mtd}/offset)"
|
||||
local total_size="$(cat /sys/class/mtd/mtd${inactive_mtd}/size)"
|
||||
local flash_start_mem=0x9f000000
|
||||
|
||||
# detect to which flash region the new image is written to.
|
||||
#
|
||||
# 1. check what is the mtd index for the first flash region on this
|
||||
# device
|
||||
# 2. check if the target partition ("inactive") has the mtd index of
|
||||
# the first flash region
|
||||
#
|
||||
# - when it is: the new bootseq will be 1,2 and the first region is
|
||||
# modified
|
||||
# - when it isnt: bootseq will be 2,1 and the second region is
|
||||
# modified
|
||||
#
|
||||
# The detection has to be done via the hardcoded mtd partition because
|
||||
# the current boot might be done with the fallback region. Let us
|
||||
# assume that the current bootseq is 1,2. The bootloader detected that
|
||||
# the image in flash region 1 is corrupt and thus switches to flash
|
||||
# region 2. The bootseq in the u-boot-env is now still the same and
|
||||
# the sysupgrade code can now only rely on the actual mtd indexes and
|
||||
# not the bootseq variable to detect the currently booted flash
|
||||
# region/image.
|
||||
#
|
||||
# In the above example, an implementation which uses bootseq ("1,2") to
|
||||
# detect the currently booted image would assume that region 1 is booted
|
||||
# and then overwrite the variables for the wrong flash region (aka the
|
||||
# one which isn't modified). This could result in a device which doesn't
|
||||
# boot anymore to Linux until it was reflashed with ap51-flash.
|
||||
local next_boot_part="1"
|
||||
case "$(board_name)" in
|
||||
plasmacloud,pa300)
|
||||
primary_kernel_mtd=3
|
||||
;;
|
||||
*)
|
||||
echo "failed to detect primary kernel mtd partition for board"
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
[ "$inactive_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
|
||||
local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
|
||||
# rootfs without EOF marker
|
||||
rootfs_length=$((rootfs_length-4))
|
||||
|
||||
local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
|
||||
# md5 checksum of rootfs with EOF marker
|
||||
local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
|
||||
|
||||
#
|
||||
# add tar support to get_image() to use default_do_upgrade() instead?
|
||||
#
|
||||
|
||||
# take care of restoring a saved config
|
||||
[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
|
||||
|
||||
mtd -q erase inactive
|
||||
tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
|
||||
tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
|
||||
|
||||
# prepare new u-boot env
|
||||
if [ "$next_boot_part" = "1" ]; then
|
||||
echo "bootseq 1,2" > $setenv_script
|
||||
else
|
||||
echo "bootseq 2,1" > $setenv_script
|
||||
fi
|
||||
|
||||
printf "kernel_size_%i %i\n" $next_boot_part $((kernel_length / 1024)) >> $setenv_script
|
||||
printf "vmlinux_start_addr 0x%08x\n" $((flash_start_mem + inactive_offset)) >> $setenv_script
|
||||
printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
|
||||
printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
|
||||
|
||||
printf "rootfs_size_%i %i\n" $next_boot_part $(((total_size-kernel_length) / 1024)) >> $setenv_script
|
||||
printf "rootfs_start_addr 0x%08x\n" $((flash_start_mem+inactive_offset+kernel_length)) >> $setenv_script
|
||||
printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
|
||||
printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
|
||||
|
||||
# store u-boot env changes
|
||||
mkdir -p /var/lock
|
||||
fw_setenv -s $setenv_script || {
|
||||
echo "failed to update U-Boot environment"
|
||||
return 1
|
||||
}
|
||||
}
|
||||
@ -5,6 +5,9 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
redboot_fis_do_upgrade() {
|
||||
local append
|
||||
local sysup_file="$1"
|
||||
@ -47,6 +50,10 @@ platform_do_upgrade() {
|
||||
jjplus,ja76pf2)
|
||||
redboot_fis_do_upgrade "$1" linux
|
||||
;;
|
||||
plasmacloud,pa300)
|
||||
PART_NAME="inactive"
|
||||
platform_do_upgrade_dualboot_datachk "$1"
|
||||
;;
|
||||
ubnt,routerstation|\
|
||||
ubnt,routerstation-pro)
|
||||
redboot_fis_do_upgrade "$1" kernel
|
||||
|
||||
@ -1579,6 +1579,24 @@ define Device/pisen_wmm003n
|
||||
endef
|
||||
TARGET_DEVICES += pisen_wmm003n
|
||||
|
||||
define Device/plasmacloud_pa300-common
|
||||
SOC := qca9533
|
||||
DEVICE_VENDOR := Plasma Cloud
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
IMAGE_SIZE := 7168k
|
||||
BLOCKSIZE := 64k
|
||||
IMAGES += factory.bin
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
endef
|
||||
|
||||
define Device/plasmacloud_pa300
|
||||
$(Device/plasmacloud_pa300-common)
|
||||
DEVICE_MODEL := PA300
|
||||
endef
|
||||
TARGET_DEVICES += plasmacloud_pa300
|
||||
|
||||
define Device/qihoo_c301
|
||||
$(Device/seama)
|
||||
SOC := ar9344
|
||||
|
||||
Loading…
Reference in New Issue
Block a user