diff --git a/target/linux/ramips/dts/mt7621_wodesys_wd-r1802u.dts b/target/linux/ramips/dts/mt7621_wodesys_wd-r1802u.dts new file mode 100644 index 0000000000..f16d27e8d7 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_wodesys_wd-r1802u.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "wodesys,wd-r1802u", "mediatek,mt7621-soc"; + model = "Wodesys WD-R1802U"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_blue; + led-failsafe = &led_red; + led-running = &led_green; + led-upgrade = &led_blue; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_green: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_blue: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + led_red: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_4 1>; + nvmem-cell-names = "mac-address"; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>; + nvmem-cell-names = "eeprom", "precal"; + mediatek,disable-radar-background; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000 0x30000>; + read-only; + }; + + /* 0x30000-0x4ffff are unused + (flash contents is 0xff) */ + + partition@50000 { + label = "factory"; + reg = <0x50000 0x40000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0xe00>; + }; + + macaddr_factory_4: macaddr@4 { // wifi 2.4 + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + precal_factory_e10: precal@e10 { + reg = <0xe10 0x19c10>; + }; + }; + }; + + partition@90000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x90000 0xf70000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "wdt"; + function = "gpio"; + }; +}; + +&switch0 { + ports { + port@4 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&xhci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index f8da28e9d6..5f6399eaed 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2898,6 +2898,17 @@ define Device/winstars_ws-wn583a6 endef TARGET_DEVICES += winstars_ws-wn583a6 +define Device/wodesys_wd-r1802u + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 15808k + DEVICE_VENDOR := Wodesys + DEVICE_MODEL := WD-R1802U + DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools + SUPPORTED_DEVICES += mt7621-rfb-ax-nor +endef +TARGET_DEVICES += wodesys_wd-r1802u + define Device/xiaomi_nand_separate $(Device/nand) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index accee97fb6..b7e3a49b43 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -61,6 +61,7 @@ ramips_setup_interfaces() ubnt,unifi-nanohd|\ yuncore,fap690|\ wavlink,wl-wn573hx1|\ + wodesys,wd-r1802u|\ zyxel,nwa50ax|\ zyxel,nwa55axe) ucidef_set_interface_lan "lan"