RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ipq40xx: add support for Plasma Cloud PA2200 

Device specifications:

* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (w25q256)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200
* GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE
* GPIO-LEDs for power (orange) and status (blue)
* 1x GPIO-button (reset)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + used as LAN interface
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 802.3at POE+
    + used as WAN interface
* 12V 2A DC

Flashing instructions:

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai>
[sven@narfation.org: prepare commit message, rebase, use all LEDs, switch
to dualboot_datachk upgrade script, use eth1 as designated WAN interface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Marek Lindner 2018-12-14 23:46:53 +08:00 committed by Petr Štetiar
parent ea5bb6bbfe
commit 4871fd2616
12 changed files with 243 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/boot/uboot-envtools/files/ipq40xx
View File

@ -37,7 +37,8 @@ glinet,gl-b1300 |\
luma,wrtq-329acn |\
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200)
plasmacloud,pa1200 |\
plasmacloud,pa2200)
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x10000" "0x10000"
;;
buffalo,wtr-m2133hp)

2
package/firmware/ipq-wifi/Makefile
View File

@ -43,6 +43,7 @@ ALLWIFIBOARDS:= \
luma_wrtq-329acn \
mobipromo_cm520-79f \
plasmacloud_pa1200 \
plasmacloud_pa2200 \
qxwlan_e2600ac
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@ -122,6 +123,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

BIN
package/firmware/ipq-wifi/board-plasmacloud_pa2200.ipq4019 Normal file
View File

Binary file not shown.

BIN
package/firmware/ipq-wifi/board-plasmacloud_pa2200.qca9888 Normal file
View File

Binary file not shown.

4
scripts/om-fwupgradecfg-gen.sh
View File

@ -7,7 +7,7 @@
#
usage() {
echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300|PA1200> <out file path> <kernel path> <rootfs path>"
echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300|PA1200|PA2200> <out file path> <kernel path> <rootfs path>"
rm -f $CFG_OUT
exit 1
}
@ -39,7 +39,7 @@ case $CE_TYPE in
SIZE_FACTOR=1024
SIZE_FORMAT="0x%08x"
;;
A62)
A62|PA2200)
MAX_PART_SIZE=15552
KERNEL_FLASH_ADDR=0x1a0000
SIZE_FACTOR=1024

3
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -18,7 +18,8 @@ ipq40xx_setup_interfaces()
engenius,emr3500|\
engenius,ens620ext|\
luma,wrtq-329acn|\
plasmacloud,pa1200)
plasmacloud,pa1200|\
plasmacloud,pa2200)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
aruba,ap-303|\

5
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -36,7 +36,8 @@ case "$FIRMWARE" in
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
;;
engenius,eap2200 |\
openmesh,a62)
openmesh,a62 |\
plasmacloud,pa2200)
caldata_extract "0:ART" 0x9000 0x2f20
;;
linksys,ea8300 |\
@ -102,6 +103,7 @@ case "$FIRMWARE" in
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)
@ -200,6 +202,7 @@ case "$FIRMWARE" in
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)

1
target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
View File

@ -48,6 +48,7 @@ platform_do_upgrade_dualboot_datachk() {
openmesh,a42)
primary_kernel_mtd=8
;;
plasmacloud,pa2200|\
openmesh,a62)
primary_kernel_mtd=10
;;

3
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -112,7 +112,8 @@ platform_do_upgrade() {
;;
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200)
plasmacloud,pa1200 |\
plasmacloud,pa2200)
PART_NAME="inactive"
platform_do_upgrade_dualboot_datachk "$1"
;;

210
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts Normal file
View File

@ -0,0 +1,210 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
* Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Plasma Cloud PA2200";
compatible = "plasmacloud,pa2200";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
};
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_status_blue;
led-running = &led_power_orange;
led-upgrade = &led_status_blue;
};
leds {
compatible = "gpio-leds";
led_power_orange: power_orange {
label = "orange:power";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
2g_blue {
label = "blue:2g";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
2g_green {
label = "green:5g1";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
5g2_green {
label = "green:5g2";
gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy2tpt";
};
led_status_blue: status_blue {
label = "blue:status";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
ieee80211-freq-limit = <5170000 5350000>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
ieee80211-freq-limit = <5470000 5875000>;
};

16
target/linux/ipq40xx/image/Makefile
View File

@ -664,6 +664,22 @@ define Device/plasmacloud_pa1200
endef
TARGET_DEVICES += plasmacloud_pa1200
define Device/plasmacloud_pa2200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
DEVICE_MODEL := PA2200
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@pc.pa2200
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
endef
TARGET_DEVICES += plasmacloud_pa2200
define Device/qcom_ap-dk01.1-c1
DEVICE_VENDOR := Qualcomm Atheros
DEVICE_MODEL := AP-DK01.1

3
target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -837,11 +837,55 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -837,11 +837,56 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -52,6 +52,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-e2600ac-c1.dtb \
+ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-pa2200.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-wpj419.dtb \