RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-01-05 06:02:29 +00:00
Code Issues Packages Projects Releases Wiki Activity

realtek: ensure output drivers are enabled in RTL8231

Browse Source 
The bootloader can leave the GPIO expander in a state which doesn't have
output drivers enabled so GPIOs will properly work for input but output
operations will have no effect.

To avoid disrupting the boot in case the bootloader left direction and
data registers in an inconsistent state (e.g. pulling SoC's reset to 0)
reconfigure everything as input.

Reviewed-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
This commit is contained in:
Paul Fertser 2021-10-01 12:37:11 +03:00 committed by Adrian Schmutzler
parent c4d5e60f61
commit 3810e89729
2 changed files with 14 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl8231.c
View File

@ -239,8 +239,6 @@ void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
int rtl8231_init(struct rtl8231_gpios *gpios)
{
u32 v;
pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id);
gpios->reg_cached = 0;
@ -254,11 +252,15 @@ int rtl8231_init(struct rtl8231_gpios *gpios)
sw_w32_mask(3, 1, RTL838X_DMY_REG5);
}
/* Select GPIO functionality for pins 0-34 */
/* Select GPIO functionality and force input direction for pins 0-36 */
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_DIR(0), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
v = rtl8231_read(gpios, RTL8231_GPIO_PIN_SEL(32));
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), v | 0x7);
rtl8231_write(gpios, RTL8231_GPIO_DIR(16), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), 0x03ff);
/* Set LED_Start to enable drivers for output mode */
rtl8231_write(gpios, RTL8231_LED_FUNC0, 1 << 1);
return 0;
}

12
target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
View File

@ -239,8 +239,6 @@ void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
int rtl8231_init(struct rtl8231_gpios *gpios)
{
u32 v;
pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id);
gpios->reg_cached = 0;
@ -254,11 +252,15 @@ int rtl8231_init(struct rtl8231_gpios *gpios)
sw_w32_mask(3, 1, RTL838X_DMY_REG5);
}
/* Select GPIO functionality for pins 0-34 */
/* Select GPIO functionality and force input direction for pins 0-36 */
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_DIR(0), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
v = rtl8231_read(gpios, RTL8231_GPIO_PIN_SEL(32));
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), v | 0x7);
rtl8231_write(gpios, RTL8231_GPIO_DIR(16), 0xffff);
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), 0x03ff);
/* Set LED_Start to enable drivers for output mode */
rtl8231_write(gpios, RTL8231_LED_FUNC0, 1 << 1);
return 0;
}