RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-11 17:34:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for WD My Net N600

Browse Source 
SoC: AR9344
RAM: 128MB
Flash: 16MiB SPI NOR
5GHz WiFi: AR9382 PCIe 2x2:2 802.11n
2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n

5x Fast ethernet via SoC switch (green LEDs)
1x USB 2.0
4x front LEDs from SoC GPIO
1x front WPS button from SoC GPIO
1x bottom reset button from SoC GPIO

UART header JP1, 115200 no parity 1 stop
TX
GND
VCC
(N/P)
RX

Flash factory image via "emergency room" recovery:
- Configure your computer with a static IP 192.168.1.123/24
- Connect to LAN port on the N600 switch
- Hold reset putton
- Power on, holding reset until the power LED blinks slowly
- Visit http://192.168.1.1/ and upload OpenWrt factory image
- Wait at least 5 minutes for flashing, reboot and key generation
- Visit http://192.168.1.1/ (OpenWrt LuCI) and upload OpenWrt sysupgrade image

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
[dt leds preparations]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Ryan Mounce 2021-11-16 21:55:19 +10:30 committed by Christian Lamparter
parent 7853453950
commit 35aecc9d4a
6 changed files with 216 additions and 87 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

108
target/linux/ath79/dts/ar9344_wd_mynet-n600.dts Normal file
View File

@ -0,0 +1,108 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344_wd_mynet-nxxx.dtsi"
#include <dt-bindings/leds/common.h>
/ {
model = "Western Digital My Net N600";
compatible = "wd,mynet-n600", "qca,ar9344";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
led_power: led-1 {
label = "blue:power";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
};
led-3 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WPS;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wps {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&gpio {
gpio_ext_lna0 {
gpio-hog;
gpios = <14 0>;
output-high;
line-name = "ext:lna0";
};
gpio_ext_lna1 {
gpio-hog;
gpios = <15 0>;
output-high;
line-name = "ext:lna1";
};
};
&pinmux {
pmx_led_switch: pinmux_led_switch {
pinctrl-single,bits =
<0x0 0x2c2b2a00 0xffffff00>, /* GPIO1-3 default to PHY2-4 */
<0x4 0x00000029 0x000000ff>; /* GPIO4 default to PHY1 */
};
};
&builtin_switch {
pinctrl-names = "default";
pinctrl-0 = <&pmx_led_switch>;
};
&usb {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
switch-only-mode = <1>;
};
};
&eth1 {
status = "okay";
};

89
target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
View File

@ -1,18 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344_wd_mynet-nxxx.dtsi"
/ {
model = "Western Digital My Net N750";
compatible = "wd,mynet-n750", "qca,ar9344";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
@ -59,75 +52,19 @@
};
};
&ref {
clock-frequency = <40000000>;
};
&gpio {
gpio_ext_lna0 {
gpio-hog;
gpios = <15 0>;
output-high;
line-name = "mynet-n750:ext:lna0";
line-name = "ext:lna0";
};
gpio_ext_lna1 {
gpio-hog;
gpios = <18 0>;
output-high;
line-name = "mynet-n750:ext:lna1";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "bdcfg";
reg = <0x040000 0x10000>;
read-only;
};
partition@50000 {
label = "devdata";
reg = <0x050000 0x10000>;
read-only;
};
partition@60000 {
label = "devconf";
reg = <0x060000 0x10000>;
read-only;
};
partition@70000 {
compatible = "seama";
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
line-name = "ext:lna1";
};
};
@ -154,26 +91,6 @@
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&mdio0 {
status = "okay";

88
target/linux/ath79/dts/ar9344_wd_mynet-nxxx.dtsi Normal file
View File

@ -0,0 +1,88 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "bdcfg";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "devdata";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "devconf";
reg = <0x060000 0x010000>;
read-only;
};
partition@70000 {
compatible = "seama";
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};

4
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -130,7 +130,8 @@ ath79_setup_interfaces()
pcs,cr3000|\
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
tplink,archer-c59-v2)
tplink,archer-c59-v2|\
wd,mynet-n600)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
@ -595,6 +596,7 @@ ath79_setup_macs()
;;
dlink,dir-859-a1|\
qihoo,c301|\
wd,mynet-n600|\
wd,mynet-n750)
lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")

2
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -30,6 +30,7 @@ case "$FIRMWARE" in
dlink,dir-859-a1|\
nec,wf1200cr|\
nec,wg1200cr|\
wd,mynet-n600|\
wd,mynet-n750)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
@ -126,6 +127,7 @@ case "$FIRMWARE" in
openmesh,mr600-v2)
caldata_extract "ART" 0x5000 0x440
;;
wd,mynet-n600|\
wd,mynet-n750)
caldata_extract "art" 0x5000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")

12
target/linux/ath79/image/generic.mk
View File

@ -2336,6 +2336,18 @@ define Device/wallys_dr531
endef
TARGET_DEVICES += wallys_dr531
define Device/wd_mynet-n600
$(Device/seama)
SOC := ar9344
DEVICE_VENDOR := Western Digital
DEVICE_MODEL := My Net N600
IMAGE_SIZE := 15872k
DEVICE_PACKAGES := kmod-usb2
SEAMA_SIGNATURE := wrgnd16_wd_db600
SUPPORTED_DEVICES += mynet-n600
endef
TARGET_DEVICES += wd_mynet-n600
define Device/wd_mynet-n750
$(Device/seama)
SOC := ar9344