ramips: add support for Planex DB-WRT01

This patch add support for Planex DB-WRT01. DANBOARD route on
 the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
 DANBOARD is Cartoon character.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 46918

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -87,6 +87,9 @@ d105)
 	ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
 	set_usb_led "$board:green:usb"
 	;;
+db-wrt01)
+	ucidef_set_led_default "power" "power" "$board:orange:power" "1"
+	;;
 dcs-930l-b1)
 	ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
 	ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -61,6 +61,7 @@ ramips_setup_interfaces()
 		;;
 	3g-6200n|\
 	ai-br100|\
+	db-wrt01|\
 	dir-300-b7|\
 	dir-320-b1|\
 	dir-610-a1|\

target/linux/ramips/base-files/etc/diag.sh

@@ -94,6 +94,7 @@ get_status_led() {
 	y1s)
 		status_led="$board:blue:power"
 		;;
+	db-wrt01|\
 	esr-9753)
 		status_led="$board:orange:power"
 		;;

target/linux/ramips/base-files/lib/ramips.sh

@@ -97,6 +97,9 @@ ramips_board_detect() {
 	*"DAP-1350")
 		name="dap-1350"
 		;;
+	*"DB-WRT01")
+		name="db-wrt01"
+		;;
 	*"DCS-930")
 		name="dcs-930"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -36,6 +36,7 @@ platform_check_image() {
 	cf-wr800n|\
 	d105|\
 	dap-1350|\
+	db-wrt01|\
 	dcs-930|\
 	dcs-930l-b1|\
 	dir-300-b1|\

target/linux/ramips/dts/DB-WRT01.dts

@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-soc";
+	model = "Planex DB-WRT01";
+
+	palmbus@10000000 {
+		gpio1: gpio@638 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l6405d";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi refclk", "rgmii1";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "llllw";
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "ephy";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+	
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "db-wrt01:orange:power";
+			gpios = <&gpio1 1 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		s1 {
+			label = "wps";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x211>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -868,6 +868,7 @@ Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n
 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
 na930_mtd_size=20971520
 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
+Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
 Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
 Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001)
 Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1)
@@ -901,6 +902,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WHR300HP2,$(1))
 	$(call Image/Build/Profile/WHR600D,$(1))
 	$(call Image/Build/Profile/WHR1166D,$(1))
+	$(call Image/Build/Profile/DB-WRT01,$(1))
 	$(call Image/Build/Profile/MZK-750DHP,$(1))
 	$(call Image/Build/Profile/NA930,$(1))
 	$(call Image/Build/Profile/OY-0001,$(1))