RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-02-15 19:37:01 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: calibrate dlink dir-825 c1 and dir-835 a1 with nvmem

Browse Source 
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration
data from the nvmem subsystem.

This allows us to move the userspace caldata extraction for the pci-e ath9k
supported wifi into the device-tree definition of the device.

Currently, "mac-address-ascii" cells only works for ethernet and wmac devices,
so PCI ath9k device uses the old method to calibrate.

Signed-off-by: Edward Chow <equu@openmail.cc>
This commit is contained in:
Edward Chow 2023-01-02 19:24:20 +08:00 committed by Hauke Mehrtens
parent a7f3a51982
commit 2a20dc717a
3 changed files with 39 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi
View File

@ -29,6 +29,9 @@
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
nvmem-cells = <&macaddr_lan>;
nvmem-cell-names = "mac-address-ascii";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
@ -55,7 +58,13 @@
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
/* "mac-address-ascii" currently does not work for
ath9k pci devices. these below are retained for future
improvements. */
/* nvmem-cells = <&macaddr_wan>, <&cal_art_5000>;
nvmem-cell-names = "mac-address-ascii", "calibration";
mac-address-increment = <1>; */
qca,no-eeprom; /* remove this when "mac-address-ascii" works */
gpio-controller;
#gpio-cells = <2>;
};
@ -102,16 +111,40 @@
read-only;
};
partition@fe0000 {
mac: partition@fe0000 {
label = "mac";
reg = <0xfe0000 0x010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_lan: macaddr@4 {
reg = <0x4 0x11>;
};
macaddr_wan: macaddr@18 {
reg = <0x18 0x11>;
};
};
partition@ff0000 {
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: cal@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: cal@5000 {
reg = <0x5000 0x440>;
};
};
};
};
@ -127,5 +160,6 @@
&wmac {
status = "okay";
qca,no-eeprom;
nvmem-cells = <&macaddr_lan>, <&cal_art_1000>;
nvmem-cell-names = "mac-address-ascii", "calibration";
};

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -639,7 +639,6 @@ ath79_setup_macs()
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
lan_mac=$(mtd_get_mac_text "mac" 0x4)
wan_mac=$(mtd_get_mac_text "mac" 0x18)
;;
dlink,dir-842-c1|\

4
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -23,9 +23,7 @@ case "$FIRMWARE" in
avm,fritzdvbc)
caldata_extract_reverse "urlader" 0x1541 0x440
;;
dlink,dir-505|\
dlink,dir-825-c1|\
dlink,dir-835-a1)
dlink,dir-505)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
;;