mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-27 00:52:36 +00:00
rockchip: Add support for RK3566 FriendlyElec NanoPi R3S
This commit adds support for the FriendlyElec NanoPi R3S. CPU: Rockchip RK3566, Quad-core Cortex-A55 RAM: 2GB LPDDR4X Ethernet: GMAC RTL8211F GbE, PCIe R8111H GbE USB3.0 Host: Type-A x1 Storage: MicroSD Slot x 1, and optional on-board 32GB eMMC Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds LED: LED x 3 RTC: One low-power RTC, supports backup battery input Both GbE controllers are working (WAN eth0, LAN eth1). Appropriate LAN/WAN interface assignments and MAC address generation. All three LEDs are working. USB appears to be working and has been tested with mass storage. Installation - microSD: -Uncompress the OpenWRT sysupgrade.img.gz -Write image to microSD card using dd or similar tool Installation - eMMC: -Boot from microSD -Uncompress the OpenWRT sysupgrade.img.gz -Flash to eMMC : dd if=x.img of=/dev/mmcblk0 -sync -Remove microSD card -Reboot Signed-off-by: Kevin Zhang <kevin@kevinzhang.me> Link: https://github.com/openwrt/openwrt/pull/16738 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Kevin Zhang
Hauke Mehrtens
parent
e35f0493b1
commit
2902b0a6fb
@ -11,6 +11,7 @@ case $board in
|
||||
friendlyarm,nanopi-r2c|\
|
||||
friendlyarm,nanopi-r2c-plus|\
|
||||
friendlyarm,nanopi-r2s|\
|
||||
friendlyarm,nanopi-r3s|\
|
||||
friendlyarm,nanopi-r4s|\
|
||||
friendlyarm,nanopi-r4s-enterprise|\
|
||||
friendlyarm,nanopi-r6c|\
|
||||
|
||||
@ -11,6 +11,7 @@ rockchip_setup_interfaces()
|
||||
friendlyarm,nanopi-r2c|\
|
||||
friendlyarm,nanopi-r2c-plus|\
|
||||
friendlyarm,nanopi-r2s|\
|
||||
friendlyarm,nanopi-r3s|\
|
||||
friendlyarm,nanopi-r4s|\
|
||||
friendlyarm,nanopi-r4s-enterprise|\
|
||||
friendlyarm,nanopi-r6c|\
|
||||
@ -62,16 +63,17 @@ rockchip_setup_macs()
|
||||
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
friendlyarm,nanopi-r4s-enterprise)
|
||||
wan_mac=$(get_mac_binary "/sys/bus/i2c/devices/2-0051/eeprom" 0xfa)
|
||||
lan_mac=$(macaddr_setbit_la "$wan_mac")
|
||||
;;
|
||||
friendlyarm,nanopi-r3s|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
friendlyarm,nanopi-r6c|\
|
||||
friendlyarm,nanopi-r6s)
|
||||
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk*)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
friendlyarm,nanopi-r4s-enterprise)
|
||||
wan_mac=$(get_mac_binary "/sys/bus/i2c/devices/2-0051/eeprom" 0xfa)
|
||||
lan_mac=$(macaddr_setbit_la "$wan_mac")
|
||||
;;
|
||||
xunlong,orangepi-r1-plus|\
|
||||
xunlong,orangepi-r1-plus-lts)
|
||||
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth1/address)" -1)
|
||||
|
||||
@ -31,6 +31,7 @@ set_interface_core() {
|
||||
case "$(board_name)" in
|
||||
armsom,sige7|\
|
||||
friendlyarm,nanopc-t6|\
|
||||
friendlyarm,nanopi-r3s|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
friendlyarm,nanopi-r6c|\
|
||||
radxa,e25|\
|
||||
|
||||
@ -65,6 +65,14 @@ define Device/friendlyarm_nanopi-r2s
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-r2s
|
||||
|
||||
define Device/friendlyarm_nanopi-r3s
|
||||
DEVICE_VENDOR := FriendlyARM
|
||||
DEVICE_MODEL := NanoPi R3S
|
||||
SOC := rk3566
|
||||
DEVICE_PACKAGES := kmod-r8169
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-r3s
|
||||
|
||||
define Device/friendlyarm_nanopi-r4s
|
||||
DEVICE_VENDOR := FriendlyARM
|
||||
DEVICE_MODEL := NanoPi R4S
|
||||
|
||||
@ -0,0 +1,567 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
|
||||
@@ -0,0 +1,554 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
+/*
|
||||
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
+ *
|
||||
+ * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
|
||||
+ * (http://www.friendlyelec.com)
|
||||
+ *
|
||||
+ * Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+#include <dt-bindings/pinctrl/rockchip.h>
|
||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
+#include "rk3566.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "FriendlyElec NanoPi R3S";
|
||||
+ compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &gmac1;
|
||||
+ mmc0 = &sdhci;
|
||||
+ mmc1 = &sdmmc0;
|
||||
+ };
|
||||
+
|
||||
+ chosen: chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&reset_button_pin>;
|
||||
+
|
||||
+ button-reset {
|
||||
+ label = "reset";
|
||||
+ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ debounce-interval = <50>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>;
|
||||
+
|
||||
+ power_led: led-0 {
|
||||
+ color = <LED_COLOR_ID_RED>;
|
||||
+ function = LED_FUNCTION_POWER;
|
||||
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ lan_led: led-1 {
|
||||
+ color = <LED_COLOR_ID_GREEN>;
|
||||
+ function = LED_FUNCTION_LAN;
|
||||
+ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wan_led: led-2 {
|
||||
+ color = <LED_COLOR_ID_GREEN>;
|
||||
+ function = LED_FUNCTION_WAN;
|
||||
+ gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v0_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vdd_usbc>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb: regulator-vcc5v0_usb {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
+ regulator-name = "vcc5v0_usb";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vdd_usbc: regulator-vdd-usbc {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vdd_usbc";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&combphy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&combphy2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&gmac1 {
|
||||
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
+ assigned-clock-rates = <0>, <125000000>;
|
||||
+ clock_in_out = "output";
|
||||
+ phy-mode = "rgmii-id";
|
||||
+ phy-handle = <&rgmii_phy1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac1m0_miim
|
||||
+ &gmac1m0_tx_bus2_level3
|
||||
+ &gmac1m0_rx_bus2
|
||||
+ &gmac1m0_rgmii_clk_level2
|
||||
+ &gmac1m0_rgmii_bus_level3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <&vdd_gpu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ vdd_cpu: regulator@1c {
|
||||
+ compatible = "tcs,tcs4525";
|
||||
+ reg = <0x1c>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ regulator-name = "vdd_cpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <800000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+ regulator-ramp-delay = <2300>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rk809: pmic@20 {
|
||||
+ compatible = "rockchip,rk809";
|
||||
+ reg = <0x20>;
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ #clock-cells = <1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int>;
|
||||
+ system-power-controller;
|
||||
+ vcc1-supply = <&vcc3v3_sys>;
|
||||
+ vcc2-supply = <&vcc3v3_sys>;
|
||||
+ vcc3-supply = <&vcc3v3_sys>;
|
||||
+ vcc4-supply = <&vcc3v3_sys>;
|
||||
+ vcc5-supply = <&vcc3v3_sys>;
|
||||
+ vcc6-supply = <&vcc3v3_sys>;
|
||||
+ vcc7-supply = <&vcc3v3_sys>;
|
||||
+ vcc8-supply = <&vcc3v3_sys>;
|
||||
+ vcc9-supply = <&vcc3v3_sys>;
|
||||
+ wakeup-source;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_logic: DCDC_REG1 {
|
||||
+ regulator-name = "vdd_logic";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: DCDC_REG2 {
|
||||
+ regulator-name = "vdd_gpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_npu: DCDC_REG4 {
|
||||
+ regulator-name = "vdd_npu";
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: DCDC_REG5 {
|
||||
+ regulator-name = "vcc_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_image: LDO_REG1 {
|
||||
+ regulator-name = "vdda0v9_image";
|
||||
+ regulator-min-microvolt = <950000>;
|
||||
+ regulator-max-microvolt = <950000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda_0v9: LDO_REG2 {
|
||||
+ regulator-name = "vdda_0v9";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_pmu: LDO_REG3 {
|
||||
+ regulator-name = "vdda0v9_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_acodec: LDO_REG4 {
|
||||
+ regulator-name = "vccio_acodec";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_sd: LDO_REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pmu: LDO_REG6 {
|
||||
+ regulator-name = "vcc3v3_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca_1v8: LDO_REG7 {
|
||||
+ regulator-name = "vcca_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_pmu: LDO_REG8 {
|
||||
+ regulator-name = "vcca1v8_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_image: LDO_REG9 {
|
||||
+ regulator-name = "vcca1v8_image";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: SWITCH_REG1 {
|
||||
+ regulator-name = "vcc_3v3";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sd: SWITCH_REG2 {
|
||||
+ regulator-name = "vcc3v3_sd";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c1 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ hym8563: rtc@51 {
|
||||
+ compatible = "haoyu,hym8563";
|
||||
+ reg = <0x51>;
|
||||
+ #clock-cells = <0>;
|
||||
+ clock-output-names = "hym8563";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&hym8563_int>;
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ wakeup-source;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mdio1 {
|
||||
+ rgmii_phy1: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ interrupt-parent = <&gpio4>;
|
||||
+ interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <ð_phy_reset_pin>;
|
||||
+ reset-assert-us = <20000>;
|
||||
+ reset-deassert-us = <100000>;
|
||||
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie2x1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pcie_reset_h>;
|
||||
+ reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ gpio-leds {
|
||||
+ lan_led_pin: lan-led-pin {
|
||||
+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ power_led_pin: power-led-pin {
|
||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wan_led_pin: wan-led-pin {
|
||||
+ rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gmac {
|
||||
+ eth_phy_reset_pin: eth-phy-reset-pin {
|
||||
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie {
|
||||
+ pcie_reset_h: pcie-reset-h {
|
||||
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pmic {
|
||||
+ pmic_int: pmic-int {
|
||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rockchip-key {
|
||||
+ reset_button_pin: reset-button-pin {
|
||||
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rtc {
|
||||
+ hym8563_int: hym8563-int {
|
||||
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ usb {
|
||||
+ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
|
||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pmu_io_domains {
|
||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||||
+ pmuio2-supply = <&vcc3v3_pmu>;
|
||||
+ vccio1-supply = <&vccio_acodec>;
|
||||
+ vccio2-supply = <&vcc_1v8>;
|
||||
+ vccio3-supply = <&vccio_sd>;
|
||||
+ vccio4-supply = <&vcc_3v3>;
|
||||
+ vccio5-supply = <&vcc_1v8>;
|
||||
+ vccio6-supply = <&vcc_3v3>;
|
||||
+ vccio7-supply = <&vcc_3v3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdhci {
|
||||
+ bus-width = <8>;
|
||||
+ max-frequency = <200000000>;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc0 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ no-sdio;
|
||||
+ no-mmc;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
+ sd-uhs-sdr50;
|
||||
+ vmmc-supply = <&vcc3v3_sd>;
|
||||
+ vqmmc-supply = <&vccio_sd>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_host {
|
||||
+ phy-supply = <&vcc5v0_usb>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_otg {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_xhci {
|
||||
+ extcon = <&usb2phy0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_xhci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop {
|
||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-an
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
Loading…
Reference in New Issue
Block a user