diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
index a4a148f53b..a33279e596 100644
--- a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
@@ -1,143 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7621_cudy_wr1300-v2v3.dtsi"
 
 / {
 	compatible = "cudy,wr1300-v2", "mediatek,mt7621-soc";
 	model = "Cudy WR1300 v2";
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-		label-mac-device = &gmac0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "green:wps";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				compatible = "nvmem-cells";
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				eeprom_factory_0: eeprom@0 {
-					reg = <0x0 0x400>;
-				};
-
-				eeprom_factory_8000: eeprom@8000 {
-					reg = <0x8000 0x4da8>;
-				};
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xf80000>;
-			};
-
-			partition@fd0000 {
-				label = "debug";
-				reg = <0xfd0000 0x10000>;
-				read-only;
-			};
-
-			partition@fe0000 {
-				label = "backup";
-				reg = <0xfe0000 0x10000>;
-				read-only;
-			};
-
-			bdinfo: partition@ff0000 {
-				compatible = "nvmem-cells";
-				label = "bdinfo";
-				reg = <0xff0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				macaddr_bdinfo_de00: macaddr@de00 {
-					reg = <0xde00 0x6>;
-				};
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
 };
 
 &pcie1 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
-		nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00>;
+		nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>;
 		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <2400000 2500000>;
 	};
 };
 
@@ -145,60 +21,8 @@
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
-		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
 		nvmem-cell-names = "eeprom", "mac-address";
-		mac-address-increment = <2>;
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&macaddr_bdinfo_de00>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
-	status = "okay";
-	label = "wan";
-	phy-handle = <&ethphy4>;
-
-	nvmem-cells = <&macaddr_bdinfo_de00>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-};
-
-&mdio {
-	ethphy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&switch0 {
-	ports {
-		port@0 {
-			status = "okay";
-			label = "lan4";
-		};
-
-		port@1 {
-			status = "okay";
-			label = "lan3";
-		};
-
-		port@2 {
-			status = "okay";
-			label = "lan2";
-		};
-
-		port@3 {
-			status = "okay";
-			label = "lan1";
-		};
-	};
-};
-
-&state_default {
-	gpio {
-		groups = "wdt", "i2c", "jtag";
-		function = "gpio";
+		ieee80211-freq-limit = <5000000 6000000>;
 	};
 };
diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2v3.dtsi b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2v3.dtsi
new file mode 100644
index 0000000000..b4c61fb7c6
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2v3.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		led-boot = &led_sys;
+		led-failsafe = &led_sys;
+		led-running = &led_sys;
+		led-upgrade = &led_sys;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sys: sys {
+			label = "green:sys";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "green:wps";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x400>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x4da8>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+			};
+
+			partition@fd0000 {
+				label = "debug";
+				reg = <0xfd0000 0x10000>;
+				read-only;
+			};
+
+			partition@fe0000 {
+				label = "backup";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "bdinfo";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_bdinfo_de00: macaddr@de00 {
+						compatible = "mac-base";
+						reg = <0xde00 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_bdinfo_de00 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "okay";
+	label = "wan";
+	phy-handle = <&ethphy4>;
+
+	nvmem-cells = <&macaddr_bdinfo_de00 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+	ethphy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan4";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan1";
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "wdt", "i2c", "jtag";
+		function = "gpio";
+	};
+};
diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v3.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v3.dts
new file mode 100644
index 0000000000..cb75703a0a
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v3.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_cudy_wr1300-v2v3.dtsi"
+
+/ {
+	compatible = "cudy,wr1300-v3", "mediatek,mt7621-soc";
+	model = "Cudy WR1300 v3";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>;
+		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <2400000 2500000>;
+
+		led {
+			led-sources = <0>;
+			led-active-low;
+		};
+	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index a306331159..a2bcc07fe5 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -615,6 +615,18 @@ define Device/cudy_wr1300-v2
 endef
 TARGET_DEVICES += cudy_wr1300-v2
 
+define Device/cudy_wr1300-v3
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 15872k
+  DEVICE_VENDOR := Cudy
+  DEVICE_MODEL := WR1300
+  DEVICE_VARIANT := v3
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+	-uboot-envtools
+  SUPPORTED_DEVICES += cudy,wr1300 R30
+endef
+TARGET_DEVICES += cudy_wr1300-v3
+
 define Device/cudy_wr2100
   $(Device/dsa-migration)
   DEVICE_VENDOR := Cudy