RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

bcm53xx: add testing support for kernel 6.1 

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki 2023-06-16 10:56:52 +02:00
parent 47cc09aa7a
commit 265071af7c
17 changed files with 2149 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/bcm53xx/Makefile
View File

@ -12,6 +12,7 @@ CPU_TYPE:=cortex-a9
SUBTARGETS:=generic
KERNEL_PATCHVER:=5.15
KERNEL_TESTING_PATCHVER:=6.1
define Target/Description
Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, *not* MIPS.

318
target/linux/bcm53xx/config-6.1 Normal file
View File

@ -0,0 +1,318 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BCM_53573=y
# CONFIG_ARCH_BCM_HR2 is not set
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_B53=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_FALLBACK_SPROM=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_SFLASH=y
# CONFIG_BCM_CYGNUS_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
# CONFIG_BGMAC_PLATFORM is not set
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
CONFIG_BROADCOM_PHY=y
CONFIG_CACHE_L2X0=y
CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_CLK_BCM_NS2 is not set
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_SR is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_BCM_5301X=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MISC=y
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_8250_SHIFT=0
CONFIG_DEBUG_UART_PHYS=0x18000300
CONFIG_DEBUG_UART_VIRT=0xf1000300
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_DEBUG_USER=y
CONFIG_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FWNODE_MDIO=y
CONFIG_FW_LOADER_PAGED_BUF=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_GENERIC=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_SMP=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KMAP_LOCAL=y
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
# CONFIG_LEDS_BCM63138 is not set
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_IPROC=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NR_CPUS=2
CONFIG_NVMEM=y
CONFIG_NVMEM_BRCM_NVRAM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIE_IPROC=y
CONFIG_PCIE_IPROC_BCMA=y
# CONFIG_PCIE_IPROC_PLATFORM is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
CONFIG_PHY_BCM_SR_USB=y
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_NS2_USB_DRD is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NS2_MUX is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PWM=y
CONFIG_PWM_BCM_IPROC=y
CONFIG_PWM_SYSFS=y
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
# CONFIG_VFP is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XXHASH=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y

99
target/linux/bcm53xx/patches-6.1/035-v6.2-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch Normal file
View File

@ -0,0 +1,99 @@
From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 8 Nov 2022 12:07:08 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
TP-Link routers have flash space partitioned according to the partitions
table. It may look like fixed partitioning but those partitions can be
actually reorganized. New can be added (or some removed), offsets and
sizes may change.
Fix DT to use binding for the TP-Link SafeLoader partitioning method.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++---------------
.../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 25 ++++---------------
2 files changed, 10 insertions(+), 40 deletions(-)
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -95,30 +95,15 @@
status = "okay";
partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
+ compatible = "tplink,safeloader-partitions";
+ partitions-table-offset = <0xe50000>;
- boot@0 {
- label = "boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- os-image@100000 {
- label = "os-image";
- reg = <0x040000 0x200000>;
+ partition-os-image {
compatible = "brcm,trx";
};
- rootfs@240000 {
- label = "rootfs";
- reg = <0x240000 0xc00000>;
- };
-
- nvram@ff0000 {
- label = "nvram";
- reg = <0xff0000 0x010000>;
+ partition-file-system {
+ linux,rootfs;
};
};
};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -104,30 +104,15 @@
status = "okay";
partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
+ compatible = "tplink,safeloader-partitions";
+ partitions-table-offset = <0xe50000>;
- boot@0 {
- label = "boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- os-image@100000 {
- label = "os-image";
- reg = <0x040000 0x200000>;
+ partition-os-image {
compatible = "brcm,trx";
};
- rootfs@240000 {
- label = "rootfs";
- reg = <0x240000 0xc00000>;
- };
-
- nvram@ff0000 {
- label = "nvram";
- reg = <0xff0000 0x010000>;
+ partition-file-system {
+ linux,rootfs;
};
};
};

242
target/linux/bcm53xx/patches-6.1/035-v6.2-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch Normal file
View File

@ -0,0 +1,242 @@
From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 7 Nov 2022 14:41:04 +0100
Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
This adds a device tree for the D-Link DIR-890L. This device
is very similar to D-Link DIR-885L, the differences are detailed
as a comment in the DTS file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
2 files changed, 212 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-asus-rt-ac88u.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-dlink-dir-890l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xap-1610.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+ model = "D-Link DIR-890L";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ };
+
+ leds {
+ /*
+ * LED information is derived from the boot log which
+ * conveniently lists all the LEDs.
+ */
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ usb3-white {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2-white {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:white:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Called "factory reset" in the vendor dmesg */
+ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /*
+ * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+ * 64KB blocks; total size 2MB, same that can be
+ * found attached to the spi_nor SPI controller.
+ */
+ nvram@1e1f0000 {
+ compatible = "brcm,nvram";
+ reg = <0x1e1f0000 0x00010000>;
+
+ et0macaddr: et0macaddr {
+ };
+ };
+};
+
+&gmac2 {
+ /*
+ * The NVRAM curiously does not contain a MAC address
+ * for et2 so since that is the only ethernet interface
+ * actually in use on the platform, we use this et0 MAC
+ * address for et2.
+ */
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&nandcs {
+ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * This is called "nflash" in the vendor kernel with
+ * "upgrade" and "rootfs" (probably using OpenWrt
+ * splitpart). We call it "firmware" like standard tools
+ * assume. The CFE loader contains incorrect information
+ * about TRX partitions, ignore this, there are no TRX
+ * partitions: this device uses SEAMA.
+ */
+ firmware@0 {
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac2>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};

165
target/linux/bcm53xx/patches-6.1/035-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch Normal file
View File

@ -0,0 +1,165 @@
From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 19 Oct 2022 21:34:49 +0200
Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
This adds a device tree for the BCM53016-based D-Link DWL-8610AP
access point wireless router.
The TRX-format partitions had to be named "firmware" due to
an OpenWrt patch that only accepts parting such nodes if they
are named "firmware".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++
2 files changed, 132 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -140,6 +140,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-netgear-r8500.dtb \
bcm47094-phicomm-k3.dtb \
bcm53015-meraki-mr26.dtb \
+ bcm53016-dlink-dwl-8610ap.dtb \
bcm53016-meraki-mr32.dtb \
bcm94708.dtb \
bcm94709.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DWL-8610AP";
+ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+ memory@0 {
+ device_type = "memory";
+ /* 512 MB RAM in 2 x Macronix D9PSH chips */
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ diag {
+ /* Actually "diag" unclear what this means */
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ wlan-2g {
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan-5g {
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ debounce-interval = <100>;
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ /* This GPIO is actually stored in NVRAM, but it's not gonna change */
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /*
+ * Flash memory at 0x1e000000-0x1fffffff
+ * Macronix 32 64KB blocks; total size 2MB, same that can be
+ * found attached to the spi_nor SPI controller.
+ */
+ nvram@1e080000 {
+ compatible = "brcm,nvram";
+ reg = <0x1e080000 0x00020000>;
+
+ et0macaddr: et0macaddr {
+ };
+
+ et1macaddr: et1macaddr {
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&et1macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+ /* Serial SPI NOR Flash MX 25L1606E */
+ status = "okay";
+};
+
+&nandcs {
+ /*
+ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+ *
+ * This ECC is a bit unorthodox but it is what the stock firmware
+ * is using, so to be able to mount the original partitions
+ * this is necessary.
+ */
+ nand-ecc-strength = <5>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* This is named nflash1.trx in CFE */
+ trx@0 {
+ label = "firmware";
+ reg = <0x00000000 0x02800000>;
+ compatible = "brcm,trx";
+ };
+
+ /* This is named nflash1.trx2 in CFE */
+ trx2@2800000 {
+ label = "firmware2";
+ reg = <0x02800000 0x02800000>;
+ compatible = "brcm,trx";
+ };
+
+ /* This is named nflash1.rwfs in CFE */
+ free@5000000 {
+ label = "free";
+ reg = <0x05000000 0x03000000>;
+ };
+ };
+};

28
target/linux/bcm53xx/patches-6.1/036-v6.2-bcma-support-SPROM-rev-11.patch Normal file
View File

@ -0,0 +1,28 @@
From b9457a04eb89645049fdf427c13e6a18d5501895 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 11 Oct 2022 14:24:40 +0200
Subject: [PATCH] bcma: support SPROM rev 11
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Rev 11 works fine for me to set the MAC address of gmac0 and
gmac1 in the D-Link DWL-8610AP.
Cc: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/bcma/sprom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -170,7 +170,7 @@ static int bcma_sprom_valid(struct bcma_
return err;
revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
- if (revision != 8 && revision != 9 && revision != 10) {
+ if (revision < 8 || revision > 11) {
pr_err("Unsupported SPROM revision: %d\n", revision);
return -ENOENT;
}

43
target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch Normal file
View File

@ -0,0 +1,43 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 13 Apr 2021 18:25:20 +0200
Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Parsing every partition with "compatible" set to "brcm,trx" results in
parsing both: firmware partition and failsafe partition on devices that
implement failsafe booting. This affects e.g. Linksys EA9500 which has:
partition@200000 {
reg = <0x0200000 0x01d00000>;
compatible = "linksys,ns-firmware", "brcm,trx";
};
partition@1f00000 {
reg = <0x01f00000 0x01d00000>;
compatible = "linksys,ns-firmware", "brcm,trx";
};
Check for MTD partition name "firmware" before parsing. Recently added
ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
bootloader setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/mtd/parsers/parser_trx.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mtd/parsers/parser_trx.c
+++ b/drivers/mtd/parsers/parser_trx.c
@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i
if (err != 0 && err != -EINVAL)
pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
+ /* Don't parse any failsafe / backup partitions */
+ if (strcmp(mtd->name, "firmware"))
+ return -EINVAL;
+
parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
GFP_KERNEL);
if (!parts)

117
target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Normal file
View File

@ -0,0 +1,117 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 1 Oct 2016 22:54:48 +0200
Subject: [PATCH] usb: xhci: add support for performing fake doorbell
Broadcom's Northstar XHCI controllers seem to need a special start
procedure to work correctly. There isn't any official documentation of
this, the problem is that controller doesn't detect any connected
devices with default setup. Moreover connecting USB device to controller
that doesn't run properly can cause SoC's watchdog issues.
A workaround that was successfully tested on multiple devices is to
perform a fake doorbell. This patch adds code for doing this and enables
it on BCM4708 family.
---
drivers/usb/host/xhci-plat.c | 6 +++++
drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
drivers/usb/host/xhci.h | 1 +
3 files changed, 67 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct xhci_plat_priv *priv = xhci_to_priv(xhci);
+ struct platform_device*pdev = to_platform_device(dev);
+ struct device_node *node = pdev->dev.of_node;
/*
* As of now platform drivers don't provide MSI support so we ensure
@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT | priv->quirks;
+
+ if (node && of_machine_is_compatible("brcm,bcm4708"))
+ xhci->quirks |= XHCI_FAKE_DOORBELL;
}
/* called during probe() after chip reset completes */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -161,6 +161,49 @@ int xhci_start(struct xhci_hcd *xhci)
return ret;
}
+/**
+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
+ *
+ * Some controllers require a fake doorbell to start correctly. Without that
+ * they simply don't detect any devices.
+ */
+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
+{
+ u32 temp;
+
+ /* Alloc a virt device for that slot */
+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+ return -ENOMEM;
+ }
+
+ /* Ring fake doorbell for slot_id ep 0 */
+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
+ usleep_range(1000, 1500);
+
+ /* Read the status to check if HSE is set or not */
+ temp = readl(&xhci->op_regs->status);
+
+ /* Clear HSE if set */
+ if (temp & STS_FATAL) {
+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
+ temp &= ~0x1fff;
+ temp |= STS_FATAL;
+ writel(temp, &xhci->op_regs->status);
+ usleep_range(1000, 1500);
+ readl(&xhci->op_regs->status);
+ }
+
+ /* Free virt device */
+ xhci_free_virt_device(xhci, slot_id);
+
+ /* We're done if controller is already running */
+ if (readl(&xhci->op_regs->command) & CMD_RUN)
+ return 0;
+
+ return xhci_start(xhci);
+}
+
/*
* Reset a halted HC.
*
@@ -641,6 +684,14 @@ static int xhci_run_finished(struct xhci
return -ENODEV;
}
+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
+ int err = xhci_fake_doorbell(xhci, 1);
+ if (err) {
+ xhci_halt(xhci);
+ return err;
+ }
+ }
+
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
if (xhci->quirks & XHCI_NEC_HOST)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1899,6 +1899,7 @@ struct xhci_hcd {
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
+#define XHCI_FAKE_DOORBELL BIT_ULL(45)
unsigned int num_active_eps;
unsigned int limit_active_eps;

101
target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch Normal file
View File

@ -0,0 +1,101 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 24 Sep 2014 22:14:07 +0200
Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Broadcom devices have broken CFE (bootloader) that leaves hardware in an
invalid state. It causes problems with booting Linux. On Northstar
devices kernel was randomly hanging in ~25% of tries during early init.
Hangs used to happen at random places in the start_kernel. On BCM53573
kernel doesn't even seem to start booting.
To workaround this problem we need to do following very early:
1) Clear 2 following bits in the SCTLR register:
#define CR_M (1 << 0) /* MMU enable */
#define CR_C (1 << 2) /* Dcache enable */
2) Flush the whole D-cache
3) Disable L2 cache
Unfortunately this patch is not upstreamable as it does above things
unconditionally. We can't check if we are running on Broadcom platform
in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
as it could break other devices support.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
OBJS += ll_char_wr.o font.o
endif
+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
+OBJS += head-bcm_5301x-mpcore.o
+OBJS += cache-v7-min.o
+endif
+
ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
--- /dev/null
+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
@@ -0,0 +1,37 @@
+/*
+ *
+ * Platform specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+ .section ".start", "ax"
+
+/*
+ * This code section is spliced into the head code by the linker
+ */
+
+__plat_uncompress_start:
+
+ @ Preserve r8/r7 i.e. kernel entry values
+ mov r12, r8
+
+ @ Clear MMU enable and Dcache enable bits
+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
+ bic r0, #CR_C|CR_M
+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
+ nop
+
+ @ Call the cache invalidation routine
+ bl v7_flush_dcache_all
+ nop
+ mov r0,#0
+ ldr r3, =0x19022000 @ L2 cache controller, control reg
+ str r0, [r3, #0x100] @ Disable L2 cache
+ nop
+
+ @ Restore
+ mov r8, r12
--- a/arch/arm/boot/compressed/cache-v7-min.S
+++ b/arch/arm/boot/compressed/cache-v7-min.S
@@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
__INIT
@@ -63,7 +64,7 @@ loop2:
ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
THUMB( lsl r6, r9, r2 )
THUMB( orr r11, r11, r6 ) @ factor index number into r11
- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the index
bge loop2
subs r4, r4, #1 @ decrement the way

711
target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch Normal file
View File

@ -0,0 +1,711 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining
devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -93,3 +93,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -83,3 +83,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -149,3 +149,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -46,3 +46,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -42,3 +42,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -86,3 +86,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -77,3 +77,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -66,6 +66,38 @@
status = "okay";
};
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ };
+ };
+};
+
&nandcs {
partitions {
compatible = "fixed-partitions";
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -130,3 +130,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -47,3 +47,45 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -104,3 +104,40 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -94,3 +94,45 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -38,6 +38,38 @@
status = "okay";
};
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
+
&nandcs {
partitions {
compatible = "fixed-partitions";
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -91,6 +91,43 @@
};
};
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
+
&spi_nor {
status = "okay";
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -100,6 +100,43 @@
vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
+
&spi_nor {
status = "okay";
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -107,3 +107,41 @@
&usb3_phy {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
+

64
target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch Normal file
View File

@ -0,0 +1,64 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-linksys-ea9200.dtb \
bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r7900.dtb \
bcm4709-netgear-r8000.dtb \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-asus-rt-ac88u.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
@@ -0,0 +1,42 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7900
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Netgear R7900";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ axi@18000000 {
+ usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};

27
target/linux/bcm53xx/patches-6.1/315-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch Normal file
View File

@ -0,0 +1,27 @@
From e492f69e4da879db7b3e9a2290e5b6620f1335b5 Mon Sep 17 00:00:00 2001
From: Aleksey Nasibulin <alealexpro100@ya.ru>
Date: Thu, 13 Oct 2022 08:16:51 +0000
Subject: [PATCH] ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys
EA6500 V2
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
Expand the definition to use all the available RAM.
Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")
Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
---
arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@
memory@0 {
device_type = "memory";
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
};
gpio-keys {

25
target/linux/bcm53xx/patches-6.1/321-ARM-dts-BCM5301X-Describe-partition-formats.patch Normal file
View File

@ -0,0 +1,25 @@
From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 22 Nov 2018 09:21:49 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's needed by OpenWrt for custom partitioning.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -35,6 +35,7 @@
partition@0 {
label = "firmware";
reg = <0x00000000 0x08000000>;
+ compatible = "seama";
};
};
};

59
target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch Normal file
View File

@ -0,0 +1,59 @@
From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 16 Oct 2014 20:52:16 +0200
Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/mtd/ubi/attach.c | 5 +++++
drivers/mtd/ubi/io.c | 4 ++++
drivers/mtd/ubi/ubi.h | 1 +
3 files changed, 10 insertions(+)
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
#define AV_ADD BIT(1)
#define AV_FIND_OR_ADD (AV_FIND | AV_ADD)
+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
+bool erase_all_next;
+
/**
* find_or_add_av - internal function to find a volume, add a volume or do
* both (find and add if missing).
@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
if (!ai)
return -ENOMEM;
+ erase_all_next = false;
+
#ifdef CONFIG_MTD_UBI_FASTMAP
/* On small flash devices we disable fastmap in any case. */
if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
}
magic = be32_to_cpu(ec_hdr->magic);
+ if (magic == 0xdeadc0de)
+ erase_all_next = true;
+ if (erase_all_next)
+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
if (magic != UBI_EC_HDR_MAGIC) {
if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -820,6 +820,7 @@ extern struct mutex ubi_devices_mutex;
extern struct blocking_notifier_head ubi_notifiers;
/* attach.c */
+extern bool erase_all_next;
struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
int ec);
void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);

36
target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch Normal file
View File

@ -0,0 +1,36 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Mon, 20 Jun 2022 10:01:18 +0200
Subject: [PATCH] net: disable GRO by default
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
In many cases GRO improves network performance however it comes at a
cost of chacksums calculations. In case of slow CPU and missing hardware
csum calculation support GRO can actually decrease network speed.
On BCM4708 *disabling* GRO results in following NAT masquarade speed
changes:
1. 364 Mb/s → 396 Mb/s (packet steering disabled)
2. 341 Mb/s → 566 Mb/s (packet steering enabled)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
include/linux/netdev_features.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/netdev_features.h
+++ b/include/linux/netdev_features.h
@@ -242,10 +242,10 @@ static inline int find_next_netdev_featu
#define NETIF_F_UPPER_DISABLES NETIF_F_LRO
/* changeable features with no special hardware requirements */
-#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO)
+#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO)
/* Changeable features with no special hardware requirements that defaults to off. */
-#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD)
+#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD | NETIF_F_GRO)
#define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \
NETIF_F_HW_VLAN_CTAG_RX | \

33
target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch Normal file
View File

@ -0,0 +1,33 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 10 Jun 2022 13:10:47 +0200
Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquarade speed by ~95%.
Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/net/ethernet/broadcom/bgmac.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -328,8 +328,7 @@
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
BGMAC_RX_FRAME_OFFSET)
-/* Jumbo frame size with FCS */
-#define BGMAC_RX_MAX_FRAME_SIZE 9724
+#define BGMAC_RX_MAX_FRAME_SIZE 1536
#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))

80
target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch Normal file
View File

@ -0,0 +1,80 @@
From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Mon, 15 Aug 2016 10:30:41 +0200
Subject: [PATCH] BCM53573 minor hacks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -54,6 +54,7 @@
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ilp>;
};
clocks {
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -330,14 +330,6 @@ static int bcma_register_devices(struct
}
#endif
-#ifdef CONFIG_BCMA_SFLASH
- if (bus->drv_cc.sflash.present) {
- err = platform_device_register(&bcma_sflash_dev);
- if (err)
- bcma_err(bus, "Error registering serial flash\n");
- }
-#endif
-
#ifdef CONFIG_BCMA_NFLASH
if (bus->drv_cc.nflash.present) {
err = platform_device_register(&bcma_nflash_dev);
@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b
bcma_register_core(bus, core);
}
+#ifdef CONFIG_BCMA_SFLASH
+ if (bus->drv_cc.sflash.present) {
+ err = platform_device_register(&bcma_sflash_dev);
+ if (err)
+ bcma_err(bus, "Error registering serial flash\n");
+ }
+#endif
+
/* Try to get SPROM */
err = bcma_sprom_get(bus);
if (err == -ENOENT) {
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -14,6 +14,7 @@
#include <linux/smp.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
+#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/clocksource_ids.h>
@@ -1021,6 +1022,16 @@ static void __init arch_timer_of_configu
if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
arch_timer_rate = rate;
+ /* Get clk rate through clk driver if present */
+ if (!arch_timer_rate) {
+ struct clk *clk = of_clk_get(np, 0);
+
+ if (!IS_ERR(clk)) {
+ if (!clk_prepare_enable(clk))
+ arch_timer_rate = clk_get_rate(clk);
+ }
+ }
+
/* Check the timer frequency. */
if (validate_timer_rate())
pr_warn("frequency not available\n");