mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-01-02 04:12:29 +00:00
ath79: add support for Letv LBA-047-CH
Specifications:
SOC: QCA9531 650 MHz
ROM: 16 MiB Flash (Winbond W25Q128FV)
RAM: 128 MiB DDR2 (Winbond W971GG6SB)
LAN: 10/100M *2
WAN: 10/100M *1
LED: BGR color *1
Mac address:
label C8:0E:77:xx:xx:68 art@0x0
lan C8:0E:77:xx:xx:62 art@0x6
wan C8:0E:77:xx:xx:68 art@0x0 (same as the label)
wlan C8:0E:77:xx:xx:B2 art@0x1002 (load automatically)
TFTP installation:
* Set local IP to 192.168.67.100 and open tftpd64, link lan
port to computer.
Rename "xxxx-factory.bin" to
"openwrt-ar71xx-generic-ap147-16M-rootfs-squashfs.bin".
* Make sure firmware file is in the tftpd's directory, push
reset button and plug in, hold it for 5 seconds, and then
it will download firmware from tftp server automatically.
More information:
* This device boot from flash@0xe80000 so we need a okli
loader to deal with small kernel partition issue. In order
to make full use of the storage space, connect a part of the
previous kernel partition to the firmware.
Stock Modify
0x000000-0x040000(u-boot) 0x000000-0x040000(u-boot)
0x040000-0x050000(u-boot-env) 0x000000-0x050000(u-boot-env)
0x050000-0xe80000(rootfs) 0x050000-0xe80000(firmware part1)
0xe80000-0xff0000(kernel) 0xe80000-0xe90000(okli-loader)
0xe90000-0xff0000(firmware part2)
0xff0000-0x1000000(art) 0xff0000-0x1000000(art)
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
This commit is contained in:
Shiji Yang
Adrian Schmutzler
parent
84451173f0
commit
184dc6e32a
158
target/linux/ath79/dts/qca9531_letv_lba-047-ch.dts
Normal file
158
target/linux/ath79/dts/qca9531_letv_lba-047-ch.dts
Normal file
@ -0,0 +1,158 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/mtd/partitions/uimage.h>
|
||||
|
||||
/ {
|
||||
model = "Letv LBA-047-CH";
|
||||
compatible = "letv,lba-047-ch", "qca,qca9531";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_red;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_red;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_wan_pin>;
|
||||
|
||||
led_status_blue: status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_red: status_red {
|
||||
label = "red:status";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x0>;
|
||||
label = "firmware";
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
openwrt,ih-magic = <IH_MAGIC_OKLI>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
/* GPIO 4: LED_LINK_5 (WAN) */
|
||||
led_wan_pin: pinmux_led_wan_pin {
|
||||
pinctrl-single,bits = <0x04 0x0000002d 0x000000ff>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwconcat0: partition@50000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x50000 0xe30000>;
|
||||
};
|
||||
|
||||
partition@e80000 {
|
||||
label = "loader";
|
||||
reg = <0xe80000 0x10000>;
|
||||
};
|
||||
|
||||
fwconcat1: partition@e90000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0xe90000 0x160000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ð1 {
|
||||
compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
||||
@ -306,6 +306,11 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
letv,lba-047-ch)
|
||||
ucidef_set_interface_wan "eth0"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
librerouter,librerouter-v1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "5:wan" "6@eth1" "4:lan"
|
||||
|
||||
@ -1414,6 +1414,21 @@ define Device/joyit_jt-or750i
|
||||
endef
|
||||
TARGET_DEVICES += joyit_jt-or750i
|
||||
|
||||
define Device/letv_lba-047-ch
|
||||
$(Device/loader-okli-uimage)
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := Letv
|
||||
DEVICE_MODEL := LBA-047-CH
|
||||
IMAGE_SIZE := 15936k
|
||||
LOADER_FLASH_OFFS := 0x50000
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
|
||||
append-loader-okli-uimage $(1) | pad-to 64k
|
||||
endef
|
||||
TARGET_DEVICES += letv_lba-047-ch
|
||||
|
||||
define Device/librerouter_librerouter-v1
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := Librerouter
|
||||
|
||||
Loading…
Reference in New Issue
Block a user