mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-23 23:23:31 +00:00
ath79: add support for Ubiquiti PowerBeam M (XW)
This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400, a 802.11n wireless with a feed+dish form factor. This device was previously supported by the ar71xx loco-m-xw firmware. Specifications: - Atheros AR9342 SoC - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see https://openwrt.org/toh/ubiquiti/powerbeam installation instructions) - Upload the factory image via AirOS web GUI. Flashing via TFTP: - Use a pointy tool (e.g., unbent paperclip) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin WARNING: so far, no non-destructive method has been discovered for opening the enclosure to reach the serial console. Internal photos are available here: https://fcc.io/SWX-NBM5HP Signed-off-by: Russell Senior <russell@personaltelco.net>
This commit is contained in:
parent
3c3a96df3f
commit
12eb5b2384
34
target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
Normal file
34
target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
Normal file
@ -0,0 +1,34 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9342_ubnt_xw.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342";
|
||||
model = "Ubiquiti PowerBeam M (XW)";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <4>;
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
/* default for ar934x, except for 1000M and 10M */
|
||||
pll-data = <0x02000000 0x00000101 0x00001313>;
|
||||
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rxd-delay = <3>;
|
||||
rxdv-delay = <3>;
|
||||
};
|
||||
};
|
@ -397,6 +397,7 @@ ubnt,nanostation-loco-m-xw|\
|
||||
ubnt,nanostation-m|\
|
||||
ubnt,nanostation-m-xw|\
|
||||
ubnt,picostation-m|\
|
||||
ubnt,powerbeam-m-xw|\
|
||||
ubnt,powerbridge-m|\
|
||||
ubnt,rocket-m)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
@ -85,6 +85,7 @@ ath79_setup_interfaces()
|
||||
ubnt,picostation-m|\
|
||||
ubnt,powerbeam-5ac-500|\
|
||||
ubnt,powerbeam-5ac-gen2|\
|
||||
ubnt,powerbeam-m-xw|\
|
||||
ubnt,powerbridge-m|\
|
||||
ubnt,rocket-5ac-lite|\
|
||||
ubnt,rocket-m|\
|
||||
|
@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
|
||||
|
||||
define Device/ubnt_powerbeam-m-xw
|
||||
$(Device/ubnt-xw)
|
||||
DEVICE_MODEL := PowerBeam M
|
||||
DEVICE_PACKAGES += rssileds
|
||||
SUPPORTED_DEVICES += loco-m-xw
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_powerbeam-m-xw
|
||||
|
||||
define Device/ubnt_powerbridge-m
|
||||
$(Device/ubnt-xm)
|
||||
SOC := ar7241
|
||||
|
Loading…
Reference in New Issue
Block a user