layerscape: update README for SD card boot and new devices
This patch is to update the README since SD card boot support and LS1012AFRWY/LS1021ATWR were introduced. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This commit is contained in:
Yangbo Lu
Hauke Mehrtens
parent
7016dd48f1
commit
0f44c7c8d1
|
|
@ -4,10 +4,15 @@ Layerscape Quick Start
|
|||
1. Layerscape target support
|
||||
----------------------------
|
||||
* ARMv8 64-bit
|
||||
LS1012ARDB LS1012AFRDM LS1043ARDB LS1046ARDB LS1088ARDB LS2088ARDB
|
||||
LS1012ARDB LS1012AFRWY LS1043ARDB LS1046ARDB LS1088ARDB LS2088ARDB
|
||||
(SD card boot support on LS1043ARDB/LS1046ARDB/LS1088ARDB)
|
||||
|
||||
* ARMv8 32-bit
|
||||
LS1012ARDB LS1012AFRDM LS1043ARDB LS1046ARDB
|
||||
LS1012ARDB LS1012AFRWY LS1043ARDB LS1046ARDB
|
||||
|
||||
* ARMv7
|
||||
LS1021ATWR
|
||||
(SD card boot support on LS1021ATWR)
|
||||
|
||||
|
||||
2. Build
|
||||
|
|
@ -17,129 +22,94 @@ Before configuration and build, update and install package feeds.
|
|||
$ ./scripts/feeds update -a
|
||||
$ ./scripts/feeds install -a
|
||||
|
||||
2.1 make menuconfig
|
||||
-------------------
|
||||
* For single device
|
||||
* make menuconfig
|
||||
Target System: "NXP Layerscape"
|
||||
Subtarget: (Select subtarget)
|
||||
Target Profile: (Select device, or "Multiple devices")
|
||||
Target Devices: (Select devices. Available when Target Profile is "Multiple devices")
|
||||
Target Images: (Disable "GZip images" if don't want to unzip manually to use the images.)
|
||||
|
||||
Target System: "NXP Layerscape".
|
||||
Subtarget: "ARMv8 64-bit based boards" or "ARMv8 32-bit based boards"
|
||||
Target Profile: (select device you want to build)
|
||||
Note: The first time make menuconfig would create a .config file which
|
||||
would include all dependencies for selected target. After that, make
|
||||
menuconfig still could be used to modify packages. If want to change
|
||||
other target, please remove .config and make menuconfig to select again.
|
||||
Otherwise the packages selected in .config would be a mess.
|
||||
|
||||
For example, build firmware for 64-bit ls1043ardb.
|
||||
+---------------------------------------------+
|
||||
| Target System (NXP Layerscape) ---> |
|
||||
|---------------------------------------------|
|
||||
| Subtarget (ARMv8 64-bit based boards) ---> |
|
||||
|---------------------------------------------|
|
||||
| Target Profile (ls1043ardb-armv8_64b) ---> |
|
||||
+---------------------------------------------+
|
||||
* make download (or make download -j<n>)
|
||||
|
||||
* For multiple devices
|
||||
* make (or make -j<n>)
|
||||
|
||||
Target System: "NXP Layerscape".
|
||||
Subtarget: "ARMv8 64-bit based boards" or "ARMv8 32-bit based boards"
|
||||
Target Profile: "Multiple devices"
|
||||
Target Devices: (select devices you want to build)
|
||||
|
||||
For example, build firmware for all 64-bit devices.
|
||||
Target Devices --->
|
||||
+-----------------------------------------------------------------+
|
||||
| [*] Enable all profiles by default |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] Use a per-device root filesystem that adds profile packages |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls1012afrdm-armv8_64b ---> |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls1012ardb-armv8_64b ---> |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls1043ardb-armv8_64b ---> |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls1046ardb-armv8_64b ---> |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls1088ardb-armv8_64b ---> |
|
||||
|-----------------------------------------------------------------|
|
||||
| [*] ls2088ardb-armv8_64b ---> |
|
||||
+-----------------------------------------------------------------+
|
||||
|
||||
Note: The first time make menuconfig would create a .config file which
|
||||
would include all dependencies for selected target. After that, make
|
||||
menuconfig still could be used to modify packages. If want to change
|
||||
other target, please remove .config and make menuconfig to select again.
|
||||
Otherwise the packages selected in .config would be a mess.
|
||||
|
||||
2.2 make (or make -j<n>)
|
||||
------------------------
|
||||
|
||||
2.3 Final firmware
|
||||
------------------
|
||||
Final firmware would be in bin/targets/layerscape/<subtarget>/, and
|
||||
named as openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin.
|
||||
* Final firmware/image
|
||||
Path: bin/targets/layerscape/<subtarget>/
|
||||
Firmware for flash: openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin
|
||||
Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img
|
||||
|
||||
|
||||
3. Program firmware to NOR/QSPI flash
|
||||
-------------------------------------
|
||||
* LS1043ARDB (NOR flash)
|
||||
3. Program NOR/QSPI flash or SD card
|
||||
------------------------------------
|
||||
The firmware.bin or sdcard.img is an all-in-one image including all things for
|
||||
OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.)
|
||||
If you want to install all things into flash, please use firmware.bin.
|
||||
If you want to install all things into SD card, please use sdcard.img.
|
||||
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
3.1 Program sdcard.img to SD card
|
||||
---------------------------------
|
||||
sdcard.img could be programmed to SD card in either u-boot environment
|
||||
or linux environment. After programming, configure the board to boot
|
||||
from SD card.
|
||||
|
||||
=> tftp a0000000 <firmware_name>.bin
|
||||
=> protect off all
|
||||
=> erase 64000000 +$filesize
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> cpld reset altbank
|
||||
* u-boot environment
|
||||
|
||||
* LS2088ARDB (NOR flash)
|
||||
=> tftp a0000000 <image_name>-sdcard.img
|
||||
=> mmc write a0000000 0 a0000
|
||||
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
Note: The default sdcard.img size is 320MB. a0000 is the block number for 320MB.
|
||||
blk_num = filesize / 512.
|
||||
|
||||
=> tftp a0000000 <firmware_name>.bin
|
||||
=> protect off all
|
||||
=> erase 584000000 +$filesize
|
||||
=> cp.b a0000000 584000000 $filesize
|
||||
=> qix altbank
|
||||
* linux environment
|
||||
|
||||
$ dd if=./<image_name>-sdcard.img of=/dev/mmcblkx
|
||||
|
||||
Note: Need to check the SD card device name to replace "mmcblkx".
|
||||
|
||||
3.2 Program firmware.bin to flash
|
||||
---------------------------------
|
||||
* LS1012ARDB (QSPI flash)
|
||||
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>.bin
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> i2c mw 0x24 0x7 0xfc;i2c mw 0x24 0x3 0xf5
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1012AFRDM (QSPI flash)
|
||||
* LS1043ARDB (NOR flash)
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
LS1012AFRDM board only has one bank. Start up board, and program firmware
|
||||
with below commands. Reset to start up OpenWrt.
|
||||
|
||||
=> tftp 96000000 <firmware_name>.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write 96000000 0 $filesize
|
||||
=> reset
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 64000000 +$filesize
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS1046ARDB (QSPI flash)
|
||||
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>.bin
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:1
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS1088ARDB (QSPI flash)
|
||||
|
||||
Start up from bank0, and program firmware to bank1 with below commands.
|
||||
Switch to bank1 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>.bin
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:1
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
|
|
@ -149,6 +119,35 @@ named as openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin.
|
|||
bank1 instead of 'qix altbank'.
|
||||
=> i2c mw 66 50 20;i2c mw 66 10 20;i2c mw 66 10 21
|
||||
|
||||
* LS2088ARDB (NOR flash)
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 584000000 +$filesize
|
||||
=> cp.b a0000000 584000000 $filesize
|
||||
=> qix altbank
|
||||
|
||||
3.3 Program LS1012AFRWY
|
||||
-----------------------
|
||||
* LS1012AFRWY (QSPI flash + SD card)
|
||||
LS1012AFRWY only supports 2MB QSPI flash. We have to put u-boot, and
|
||||
some firmwares on QSPI flash, and kernel/dtb/rootfs on SD card.
|
||||
So both firmware.bin and sdcard.img are needed for OpenWrt starting up.
|
||||
|
||||
To program sdcard.img, please use linux command described in 3.1 on a
|
||||
linux machine.
|
||||
To program firmware.bin, start up board from QSPI flash, and program
|
||||
firmware with below commands. Reset to start up OpenWrt. (LS1012AFRWY
|
||||
supports only one bank.)
|
||||
|
||||
=> tftp 96000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write 96000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
|
||||
4. Known issues and limitation
|
||||
------------------------------
|
||||
|
|
@ -161,10 +160,7 @@ named as openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin.
|
|||
=> setenv eth1addr 00:04:9F:04:65:4c
|
||||
|
||||
|
||||
5. Other references and sources
|
||||
-------------------------------
|
||||
5. Other references
|
||||
-------------------
|
||||
- NXP LSDK site: https://lsdk.github.io/
|
||||
|
||||
- NXP LSDK github: https://github.com/qoriq-open-source
|
||||
|
||||
- LEDE documentation: https://lede-project.org/docs/start
|
||||
- OpenWrt documentation: https://openwrt.org/docs/start
|
||||
|
|
|
|||
Loading…
Reference in New Issue