RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-26 08:32:38 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for D-Link DIR-842 C1

Browse Source 
Hardware spec of DIR-842 C1:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: circuit onboard, but components are not soldered

Flash instructions:

1. Upgrade the factory.bin through the factory web interface or
   the u-boot failsafe interface.
   The firmware will boot up correctly for the first time.
   Do not power off the device after OpenWrt has booted.
   Otherwise the u-boot will enter failsafe mode as the checksum
   of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
   After upgrading completes the u-boot won't complain about the
   firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
   just upgrade the factory.bin through the u-boot failsafe interface
   and then goto step 2.

Signed-off-by: Jackson Lim <jackcolentern@gmail.com>
[fix whitespace issues]
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
Jackson Lim 2019-07-25 22:44:11 +08:00 committed by David Bauer
parent 7ed643d205
commit 030fc6ab6c
8 changed files with 207 additions and 144 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@ -62,6 +62,7 @@ comfast,cf-e5)
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"

2
target/linux/ath79/base-files/etc/board.d/02_network
View File

@ -115,6 +115,7 @@ ath79_setup_interfaces()
;;
dlink,dir-825-c1|\
dlink,dir-835-a1|\
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
engenius,epg5000|\
@ -307,6 +308,7 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "mac" 4)
wan_mac=$(mtd_get_mac_text "mac" 24)
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\

1
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -105,6 +105,7 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 4) 2
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\

1
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -189,6 +189,7 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
dlink,dir-842-c1|\
dlink,dir-842-c2|\
nec,wg1200cr)
ath10kcal_extract "art" 20480 12064

145
target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi Normal file
View File

@ -0,0 +1,145 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
keys {
compatible = "gpio-keys";
wps {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
// Pull up on boot - otherwise the reset button won't work
reset-button {
gpio-hog;
output-high;
gpios = <11 GPIO_ACTIVE_LOW>;
line-name = "reset-button";
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x10000>;
read-only;
};
partition@50000 {
label = "devdata";
reg = <0x050000 0x10000>;
read-only;
};
partition@60000 {
label = "devconf";
reg = <0x060000 0x10000>;
read-only;
};
partition@70000 {
label = "misc";
reg = <0x070000 0x10000>;
read-only;
};
partition@80000 {
compatible = "seama";
label = "firmware";
reg = <0x080000 0xf50000>;
};
art: partition@fd0000 {
label = "art";
reg = <0xfd0000 0x010000>;
read-only;
};
partition@fe0000 {
label = "reserved";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xcb37cb37 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
qca,no-eeprom;
};

41
target/linux/ath79/dts/qca9563_dlink_dir-842-c1.dts Normal file
View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9563_dlink_dir-842-c.dtsi"
/ {
compatible = "dlink,dir-842-c1", "qca,qca9563";
model = "D-Link DIR-842 C1";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
wps {
label = "dir-842-c1:green:wps";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
power: power {
label = "dir-842-c1:green:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet {
label = "dir-842-c1:green:internet";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
label = "dir-842-c1:green:wlan";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};

143
target/linux/ath79/dts/qca9563_dlink_dir-842-c2.dts
View File

@ -1,14 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
#include "qca9563_dlink_dir-842-c.dtsi"
/ {
model = "D-Link DIR-842 C2";
compatible = "dlink,dir-842-c2", "qca,qca9563";
model = "D-Link DIR-842 C2";
aliases {
led-boot = &power;
@ -17,10 +14,6 @@
led-upgrade = &power;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
@ -45,138 +38,6 @@
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
wps {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
// Pull up on boot - otherwise the reset button won't work
reset-button {
gpio-hog;
output-high;
gpios = <11 GPIO_ACTIVE_LOW>;
line-name = "reset-button";
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x10000>;
read-only;
};
partition@50000 {
label = "devdata";
reg = <0x050000 0x10000>;
read-only;
};
partition@60000 {
label = "devconf";
reg = <0x060000 0x10000>;
read-only;
};
partition@70000 {
label = "misc";
reg = <0x070000 0x10000>;
read-only;
};
partition@80000 {
compatible = "seama";
label = "firmware";
reg = <0x080000 0xf50000>;
};
art: partition@fd0000 {
label = "art";
reg = <0xfd0000 0x010000>;
read-only;
};
partition@fe0000 {
label = "reserved";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xcb37cb37 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&usb_phy0 {

17
target/linux/ath79/image/generic.mk
View File

@ -365,11 +365,10 @@ define Device/dlink_dir-859-a1
endef
TARGET_DEVICES += dlink_dir-859-a1
define Device/dlink_dir-842-c2
define Device/dlink_dir-842-c
ATH_SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-842
DEVICE_VARIANT := C2
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | seama
IMAGES += factory.bin
@ -384,7 +383,19 @@ define Device/dlink_dir-842-c2
IMAGE/factory.bin := \
$$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
IMAGE_SIZE := 15680k
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
define Device/dlink_dir-842-c1
$(Device/dlink_dir-842-c)
DEVICE_VARIANT := C1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += dlink_dir-842-c1
define Device/dlink_dir-842-c2
$(Device/dlink_dir-842-c)
DEVICE_VARIANT := C2
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += dlink_dir-842-c2