openwrt/target/linux/s3c24xx/patches-2.6.24/1148-fix-backlight-disable-on-zero-intensity.patch.patch

82 lines
2.5 KiB
Diff
Raw Normal View History

From c9d44c8b43d29dd500c1dd711e490bdcd47f2830 Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Tue, 13 May 2008 18:53:40 +0100
Subject: [PATCH] fix-backlight-disable-on-zero-intensity.patch
It's never right to put 0 intensity into LEDOUT according to datasheet
But having a floor at intensity 2 means backlight isn't properly off
when "dimmed". So change to intensity 0 --> disable backlight.
Signed-off-by: Andy Green <andy@openmoko.com>
---
drivers/i2c/chips/pcf50633.c | 34 +++++++++++++++++++++-------------
1 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
index dc4ea0a..205f4e3 100644
--- a/drivers/i2c/chips/pcf50633.c
+++ b/drivers/i2c/chips/pcf50633.c
@@ -1458,6 +1458,9 @@ static int pcf50633bl_get_intensity(struct backlight_device *bd)
struct pcf50633_data *pcf = bl_get_data(bd);
int intensity = reg_read(pcf, PCF50633_REG_LEDOUT);
+ if (!(reg_read(pcf, PCF50633_REG_LEDOUT) & 1))
+ intensity = 0;
+
return intensity & 0x3f;
}
@@ -1466,31 +1469,36 @@ static int pcf50633bl_set_intensity(struct backlight_device *bd)
struct pcf50633_data *pcf = bl_get_data(bd);
int intensity = bd->props.brightness;
int old_intensity = reg_read(pcf, PCF50633_REG_LEDOUT);
- u_int8_t ledena = 2;
int ret;
- if (bd->props.power != FB_BLANK_UNBLANK)
- intensity = 0;
- if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+ if (!(reg_read(pcf, PCF50633_REG_LEDOUT) & 1))
+ old_intensity = 0;
+
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.fb_blank != FB_BLANK_UNBLANK))
intensity = 0;
- /* The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
+ /*
+ * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
* if seen, you have to re-enable the LED unit
+ * we treat intensity 0 as disable
*/
- if (intensity != 0 && old_intensity == 0) {
- ledena = reg_read(pcf, PCF50633_REG_LEDENA);
- reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
+ if (intensity && !old_intensity) {
+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x00);
+ if (ret)
+ return ret;
}
if (!intensity) /* illegal to set LEDOUT to 0 */
- ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
- else
+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x00);
+ else {
ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
intensity);
-
- if (intensity != 0 && old_intensity == 0)
- reg_write(pcf, PCF50633_REG_LEDENA, ledena);
+ if (ret)
+ return ret;
+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x01);
+ }
return ret;
}
--
1.5.6.5