openwrt/target/linux/malta/be64/config-default

# CONFIG_32BIT is not set
CONFIG_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_MMAP_RND_BITS=12
CONFIG_ARCH_MMAP_RND_BITS_MAX=18
CONFIG_ARCH_MMAP_RND_BITS_MIN=12
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_RIXI=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_MIPS64=y
CONFIG_CPU_MIPS64_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HUGEPAGES=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_MIPS32_N32 is not set
# CONFIG_MIPS32_O32 is not set
CONFIG_MIPS_EBPF_JIT=y
CONFIG_MIPS_PGD_C0_CONTEXT=y
CONFIG_MIPS_SPRAM=y
# CONFIG_MIPS_VA_BITS_48 is not set
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_TARGET_ISA_REV=2
CONFIG_ZONE_DMA32=y
malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211 2013-04-05 12:36:48 +00:00			`# CONFIG_32BIT is not set`
refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36214 2013-04-06 11:40:41 +00:00			`CONFIG_64BIT=y`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_ARCH_DMA_ADDR_T_64BIT=y`
malta: Refresh kernel 4.14 configuration Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2019-01-13 13:31:03 +00:00			`CONFIG_ARCH_MMAP_RND_BITS=12`
			`CONFIG_ARCH_MMAP_RND_BITS_MAX=18`
			`CONFIG_ARCH_MMAP_RND_BITS_MIN=12`
malta: upgrade to kernel 4.9 This brings the MIPS malta target to kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2017-10-15 10:42:33 +00:00			`CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y`
malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211 2013-04-05 12:36:48 +00:00			`CONFIG_CPU_BIG_ENDIAN=y`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_CPU_HAS_RIXI=y`
malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211 2013-04-05 12:36:48 +00:00			`# CONFIG_CPU_LITTLE_ENDIAN is not set`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_CPU_MIPS64=y`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_CPU_MIPS64_R2=y`
			`CONFIG_CPU_MIPSR2=y`
malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211 2013-04-05 12:36:48 +00:00			`CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_CPU_SUPPORTS_HUGEPAGES=y`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_CPU_SUPPORTS_MSA=y`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_HAVE_EBPF_JIT=y`
			`CONFIG_HAVE_KVM=y`
malta: Refresh kernel 4.14 configuration Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2019-01-13 13:31:03 +00:00			`CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y`
malta: Deactivate MIPS O32 and N32 support OpenWrt is completely compiled from sources using a 64 bit compiler, we do not need support for the old 32 bit MIPS interface on 64 Bit CPUs, deactivate it. Fixes: 46af22de16b2 ("kernel: Remove CONFIG_COMPAT") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2019-05-12 15:14:38 +00:00			`# CONFIG_MIPS32_N32 is not set`
			`# CONFIG_MIPS32_O32 is not set`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_MIPS_EBPF_JIT=y`
			`CONFIG_MIPS_PGD_C0_CONTEXT=y`
			`CONFIG_MIPS_SPRAM=y`
malta: upgrade to kernel 4.9 This brings the MIPS malta target to kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2017-10-15 10:42:33 +00:00			`# CONFIG_MIPS_VA_BITS_48 is not set`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_MODULES_USE_ELF_RELA=y`
malta: enable be64 and le64 subtargets Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> 2016-08-15 11:16:02 +00:00			`CONFIG_PGTABLE_LEVELS=3`
malta: refresh configuration Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819 2013-08-21 00:36:53 +00:00			`CONFIG_PHYS_ADDR_T_64BIT=y`
			`CONFIG_SYS_SUPPORTS_HUGETLBFS=y`
malta: update MIPS64 ISA to R2 Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2020-08-14 05:11:22 +00:00			`CONFIG_TARGET_ISA_REV=2`
malta: enable be64 and le64 subtargets Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> 2016-08-15 11:16:02 +00:00			`CONFIG_ZONE_DMA32=y`