openwrt/target/linux/imx/Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2013-2014 OpenWrt.org

include $(TOPDIR)/rules.mk

BOARD:=imx
BOARDNAME:=NXP i.MX
FEATURES:=audio display fpu gpio pcie rtc usb usbgadget squashfs targz nand ubifs boot-part rootfs-part
SUBTARGETS:=cortexa7 cortexa9 cortexa53

KERNEL_PATCHVER:=6.1
KERNEL_TESTING_PATCHVER:=6.6

include $(INCLUDE_DIR)/target.mk

DEFAULT_PACKAGES += uboot-envtools mkf2fs e2fsprogs blkid

$(eval $(call BuildTarget))
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 13:52:34 +00:00			`# SPDX-License-Identifier: GPL-2.0-only`
imx6: add new target SVN-Revision: 36753 2013-05-29 01:27:29 +00:00			`#`
imx6: make boardname consistent with other targets Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 40758 2014-05-13 21:56:05 +00:00			`# Copyright (C) 2013-2014 OpenWrt.org`
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 13:52:34 +00:00
imx6: add new target SVN-Revision: 36753 2013-05-29 01:27:29 +00:00			`include $(TOPDIR)/rules.mk`

imx6: rename target to 'imx' This is first step in migrating to a generic i.MX target which in the next steps will also get divided into arch-specific subtargets. In the result, this will make it possible to support, within a single target, also other modern NXP i.MX families, like the i.MX 7, i.MX 8 or recently introduced i.MX 9. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 2021-03-28 14:56:18 +00:00			`BOARD:=imx`
			`BOARDNAME:=NXP i.MX`
imx6: extend cubox support to hummingboard, add support for building full images Signed-off-by: Felix Fietkau <nbd@nbd.name> 2018-08-26 18:04:08 +00:00			`FEATURES:=audio display fpu gpio pcie rtc usb usbgadget squashfs targz nand ubifs boot-part rootfs-part`
imx: add imx8m support Add imx8m support: - add a cortexa53 subtarget to imx - move ARCH and KERNELNAME to subtargets - account for kernel modules that are not used for cortexa53 No device-specific targets or firmware images are created yet but all imx8m* dtbs will be built. enabling CONFIG_TARGET_ROOTFS_INITRAMFS results in openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin which has been successfully booted on an imx8mm-evk using the following: u-boot=> tftpboot $fdt_addr_r image-imx8mm-evk.dtb && \ tftpboot $kernel_addr_r openwrt-imx-cortexa53-imx8m-initramfs-kernel.bin && \ booti $kernel_addr_r - $fdt_addr_r Signed-off-by: Tim Harvey <tharvey@gateworks.com> 2024-01-08 22:04:15 +00:00			`SUBTARGETS:=cortexa7 cortexa9 cortexa53`
imx6: add new target SVN-Revision: 36753 2013-05-29 01:27:29 +00:00
imx: switch to kernel 6.1 I have this kernel running for weeks some on a lot of boards in multiple scenarios Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> 2024-02-13 10:18:03 +00:00			`KERNEL_PATCHVER:=6.1`
imx: add 6.6 kernel as testing allow to test 6.6 kernel for imx Signed-off-by: Tim Harvey <tharvey@gateworks.com> 2024-05-16 23:31:30 +00:00			`KERNEL_TESTING_PATCHVER:=6.6`
imx6: add new target SVN-Revision: 36753 2013-05-29 01:27:29 +00:00
			`include $(INCLUDE_DIR)/target.mk`

imx6: Add support for Toradex Apalis family of CoMs This patch adds support for the following computer on modules (CoM) from Toradex[A]: Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC 0° to +70° C Temp Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC 0° to +70° C Temp I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on Eval[C] board as well. A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6 B. https://www.toradex.com/products/carrier-board/ixora-carrier-board C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board Flashing/recovery instructions: 1. Download and compile imx_loader for OpenWrt from https://github.com/ynezz/imx_loader 2. Enter recovery mode as desribed in https://developer.toradex.com/knowledge-base/imx-recovery-mode 3. Connect board via USB to the host computer, check that it's connected by lsusb: 15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip in RecoveryMode 4. Copy following OpenWrt images to imx_loader directory: SPL u-boot.img u-boot-with-spl.imx openwrt-imx6-apalis-recovery.scr openwrt-imx6-apalis-squashfs.combined.bin 5. Run imx_usb in imx_loader directory Signed-off-by: Petr Štetiar <ynezz@true.cz> 2018-11-23 09:33:24 +00:00			`DEFAULT_PACKAGES += uboot-envtools mkf2fs e2fsprogs blkid`
imx6: put uboot-envtools in DEFAULT_PACKAGES Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478 2015-04-17 13:47:13 +00:00
imx6: add new target SVN-Revision: 36753 2013-05-29 01:27:29 +00:00			`$(eval $(call BuildTarget))`