RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/ixp4xx/config-6.6

261 lines
6.2 KiB
Groff
Raw Normal View History

ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_ALIGNMENT_TRAP=y
ixp4xx: Add USRobotics USR8200 support This brings back USRobotics USR8200 support to the IXP4xx target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-23 06:43:09 +00:00
CONFIG_AMD_PHY=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IXP4XX=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4 is not set
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_ARCH_STACKWALK=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_HAS_GROUP_RELOCS=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_BUFFER_HEAD=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_ENDIAN_BE32=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_CPU_MITIGATIONS=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CPU_XSCALE=y
CONFIG_CRC16=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DEV_IXP4XX=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_DES=m
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_CRYPTO_LIB_GF128MUL=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_8250_SHIFT=2
CONFIG_DEBUG_UART_PHYS=0xc8000003
CONFIG_DEBUG_UART_VIRT=0xfec00003
CONFIG_DMA_OPS=y
CONFIG_DTC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_EXT4_FS=y
# CONFIG_FARSYNC is not set
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FORCE_PCI=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_FUNCTION_ALIGNMENT=0
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_FWNODE_MDIO=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_IXP4XX=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_GRO_CELLS=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_HAS_IOPORT=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HDLC=y
CONFIG_HWMON=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_IOP3XX=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_IRQCHIP=y
CONFIG_IRQSTACKS=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_IWMMXT is not set
CONFIG_IXP4XX_ETH=y
CONFIG_IXP4XX_HSS=y
CONFIG_IXP4XX_IRQ=y
CONFIG_IXP4XX_NPE=y
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_TIMER=y
CONFIG_IXP4XX_WATCHDOG=y
CONFIG_JBD2=y
CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGRATION=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_IXP4XX=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_NET_DEVLINK=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6060=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_EGRESS=y
CONFIG_NET_INGRESS=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_SELFTESTS=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_NET_SWITCHDEV=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_NET_VENDOR_XSCALE=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_NET_XGRESS=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_NLS=y
CONFIG_NVMEM=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_NVMEM_LAYOUTS=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_NVMEM_SYSFS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PAGE_POOL=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_PATA_IXP4XX_CF=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_IXP4XX=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_PHYLIB_LEDS=y
CONFIG_PHYLINK=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_RANDSTRUCT_NONE=y
CONFIG_RATIONAL=y
CONFIG_REALTEK_PHY=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_SCSI=y
CONFIG_SCSI_COMMON=y
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_SERIAL_8250_FSL=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SG_POOL=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
CONFIG_SWPHY=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_PCI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USE_OF=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0