openwrt/target/linux/brcm47xx/patches-4.4/940-bcm47xx-yenta.patch

47 lines
1.5 KiB
Diff
Raw Normal View History

--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -919,6 +919,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -934,6 +936,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1018,6 +1021,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
}
@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d
dev_info(&dev->dev, "Socket status: %08x\n",
cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */