RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-22 14:43:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
47eeb9f857
openwrt/target/linux/apm821xx/image/Makefile

165 lines
4.1 KiB
Makefile
Raw Normal View History

apm821xx: add support for the apm821xx device target This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:50 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
apm821xx: add support for the Cisco Meraki MR24 This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:51 +00:00
include $(INCLUDE_DIR)/host.mk
apm821xx: add support for the apm821xx device target This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:50 +00:00
apm821xx: add support for the Cisco Meraki MR24 This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:51 +00:00
DEVICE_VARS += DEVICE_DTS DEVICE_PROFILE IMAGE_SIZE DTB_SIZE
apm821xx: add support for the apm821xx device target This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:50 +00:00
define Device/Default
apm821xx: add support for the Cisco Meraki MR24 This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:51 +00:00
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
DEVICE_PROFILE :=
DEVICE_DTS :=
KERNEL_ENTRY := 0x00000000
KERNEL_LOADADDR := 0x00000000
endef
define Build/dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
endef
ifeq ($(SUBTARGET),nand)
define Image/cpiogz
( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
define Build/MerakiAdd-dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
( \
dd if=$@.dtb bs=$(DTB_SIZE) conv=sync; \
dd if=$@ bs=$(BLOCKSIZE) conv=sync; \
) > $@.new
@mv $@.new $@
apm821xx: add support for the apm821xx device target This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:50 +00:00
endef
apm821xx: add support for the Cisco Meraki MR24 This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:51 +00:00
define Build/MerakiAdd-initramfs
$(call Image/cpiogz)
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
-C gzip -n "$(PROFILE) rootfs" \
-d $(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz \
$(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz
( \
dd if=$@ bs=1k conv=sync; \
dd if=$(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz bs=$(BLOCKSIZE) conv=sync; \
) > $@.new
@mv $@.new $@
endef
define Build/MerakiNAND
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
-B $(DEVICE_PROFILE) -s \
-i $@ \
-o $@.new
@cp $@.new $@
endef
define Device/mr24
DEVICE_TITLE := Cisco Meraki MR24
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k wpad-mini
DEVICE_PROFILE := MR24
DEVICE_DTS := MR24
BLOCKSIZE := 64512
IMAGES := sysupgrade.tar
DTB_SIZE := 64512
KERNEL_SIZE := 2048k
IMAGE_SIZE := 8191k
KERNEL := kernel-bin | lzma | uImage lzma | MerakiAdd-dtb | MerakiNAND
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | lzma | uImage lzma | MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | MerakiNAND
IMAGE/sysupgrade.tar := sysupgrade-nand
endef
TARGET_DEVICES += mr24
apm821xx: add support for the apm821xx device target This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:50 +00:00
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
endif
ifeq ($(SUBTARGET),sata)
### Image scripts for the WD My Book Live Series ###
define Build/boot-script
$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
-d mbl_boot.scr \
$@.scr
endef
define Build/boot-img
$(RM) -rf $@.bootdir
mkdir -p $@.bootdir/boot
$(CP) $@.scr $@.bootdir/boot/boot.scr
$(CP) $@.dtb $@.bootdir/boot/$(DEVICE_DTB)
$(CP) $(word 1,$^) $@.bootdir/boot/uImage
genext2fs --block-size $(BLOCKSIZE) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
# convert it to revision 1 - needed for u-boot ext2load
$(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
$(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
endef
define Build/hdd-img
./mbl_gen_hdd_img.sh $@ $@.boot $(word 2,$^)
$(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
endef
define Build/uRamdisk
$(call Image/mkfs/ext4)
gzip -9n -c $(KDIR)/root.ext4 > $(KDIR)/root.ext4.gz
$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T ramdisk -C gzip -n "$(PROFILE) rootfs" \
-d $(KDIR)/root.ext4.gz \
$@.uRamdisk
endef
define Build/recovery-tar
sh ./mbl_gen_recovery_tar.sh \
--profile $(DEVICE_PROFILE) \
--dtb $@.dtb \
--dtbname $(DEVICE_DTB) \
--kernel $@ \
--rootfs $@.uRamdisk \
$@
endef
define Device/MyBookLiveDefault
IMAGE_SIZE := 48m
BLOCKSIZE := 1024
DTB_SIZE := 16384
KERNEL := kernel-bin | gzip | uImage gzip
BOOT_SIZE := 8
IMAGES := rootfs.img recovery.tar
DEVICE_DTB := apollo3g.dtb
IMAGE/rootfs.img := boot-script | dtb | boot-img | hdd-img
IMAGE/recovery.tar := kernel-bin | dtb | uRamdisk | recovery-tar
endef
define Device/MyBookLiveSingle
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live
DEVICE_DTS := apollo3g
DEVICE_PROFILE := apollo3g
endef
TARGET_DEVICES += MyBookLiveSingle
define Device/MyBookLiveDuo
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live Duo
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-ledtrig-usbdev kmod-usb-storage kmod-fs-vfat wpad-mini
DEVICE_DTS := apollo3g-duo
DEVICE_PROFILE := ap2nc
endef
TARGET_DEVICES += MyBookLiveDuo
apm821xx: add support for the Cisco Meraki MR24 This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-20 13:44:51 +00:00
endif
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink