openwrt/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts

// SPDX-License-Identifier: (GPL-2.0 OR MIT)

/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

#include "mt7986b.dtsi"

/ {
	model = "Netgear WAX220";
	compatible = "netgear,wax220", "mediatek,mt7986b";

	aliases {
		serial0 = &uart0;
		led-boot = &led_power_blue;
		led-failsafe = &led_power_amber;
		led-running = &led_power_green;
		led-upgrade = &led_power_amber;
	};

	gpio-keys {
		compatible = "gpio-keys";

		reset {
			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			label = "reset";
		};
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	leds {
		compatible = "gpio-leds";

		wlan5g_green {
			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
			label = "green:wlan5g";
		};

		led_power_amber: power_amber {
			gpios = <&pio 15 GPIO_ACTIVE_LOW>;
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_AMBER>;
		};

		wlan2g_green {
			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
			label = "green:wlan2g";
		};

		led_power_blue: power_blue {
			gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_BLUE>;
		};

		led_power_green: power_green {
			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
		};

		wlan2g_blue {
			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
			label = "blue:wlan2g";
		};

		lan_green {
			gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_GREEN>;
		};

		lan_amber {
			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_AMBER>;
		};

		wlan5g_blue {
			gpios = <&pio 2 GPIO_ACTIVE_LOW>;
			label = "blue:wlan5g";
		};
	};
};

&crypto {
	status = "okay";
};

&eth {
	status = "okay";

	gmac1: mac@1 {
		compatible = "mediatek,eth-mac";
		reg = <1>;
		phy-handle = <&phy6>;
		phy-mode = "2500base-x";
	};

	mdio: mdio-bus {
		#address-cells = <1>;
		#size-cells = <0>;
	};
};

&mdio {
	phy6: ethernet-phy@6 {
		reg = <6>;
		reset-assert-us = <100000>;
		reset-deassert-us = <100000>;
		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
		interrupt-controller;
		#interrupt-cells = <1>;
		interrupt-parent = <&pio>;
		interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
	};
};

&pio {
	spi_flash_pins: spi-flash-pins-33-to-38 {
		mux {
			function = "spi";
			groups = "spi0", "spi0_wp_hold";
		};
		conf-pu {
			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
			drive-strength = <8>;
			mediatek,pull-up-adv = <0>; /* bias-disable */
		};
		conf-pd {
			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
			drive-strength = <8>;
			mediatek,pull-down-adv = <0>; /* bias-disable */
		};
	};

	wf_2g_5g_pins: wf_2g_5g-pins {
		mux {
			function = "wifi";
			groups = "wf_2g", "wf_5g";
		};
		conf {
			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
			       "WF1_TOP_CLK", "WF1_TOP_DATA";
			drive-strength = <4>;
		};
	};

	wf_dbdc_pins: wf-dbdc-pins {
		mux {
			function = "wifi";
			groups = "wf_dbdc";
		};
		conf {
			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
			       "WF0_TOP_CLK", "WF0_TOP_DATA";
			drive-strength = <4>;
		};
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi_flash_pins>;
	status = "okay";

	spi_nand_flash: flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spi-nand";
		reg = <0>;

		spi-max-frequency = <20000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;

		mediatek,nmbm;
		mediatek,bmt-max-ratio = <1>;
		mediatek,bmt-max-reserved-blocks = <256>;
		mediatek,bmt-remap-range = <0x0 0x580000>;

		partitions: partitions {
			#address-cells = <0x1>;
			#size-cells = <0x1>;
			compatible = "fixed-partitions";

			partition@0 {
				label = "BL2";
				read-only;
				reg = <0x0 0x100000>;
			};

			partition@100000 {
				label = "u-boot-env";
				reg = <0x100000 0x80000>;
			};

			factory: partition@180000 {
				label = "Factory";
				reg = <0x180000 0x200000>;
			};

			partition@380000 {
				label = "FIP";
				reg = <0x380000 0x200000>;
			};

			partition@580000 {
				label = "ubi";
				reg = <0x580000 0x5140000>;
			};

			partition@56c0000 {
				label = "RAE";
				reg = <0x56c0000 0x400000>;
			};

			partition@5ac0000 {
				label = "POT";
				reg = <0x5ac0000 0x100000>;
			};

			partition@5bc0000 {
				label = "Language";
				reg = <0x5bc0000 0x400000>;
			};

			partition@5fc0000 {
				label = "Traffic";
				reg = <0x5fc0000 0x200000>;
			};

			partition@61c0000 {
				label = "Cert";
				reg = <0x61c0000 0x100000>;
			};

			partition@62c0000 {
				label = "NTGRcryptK";
				reg = <0x62c0000 0x100000>;
			};

			partition@63c0000 {
				label = "NTGRcryptD";
				reg = <0x63c0000 0x500000>;
			};

			partition@68c0000 {
				label = "LOG";
				reg = <0x68c0000 0x100000>;
			};

			partition@69c0000 {
				label = "User_data";
				reg = <0x69c0000 0x640000>;
			};
		};
	};

};

&trng {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&watchdog {
	status = "okay";
};

&wifi {
	status = "okay";
	pinctrl-names = "default", "dbdc";
	pinctrl-0 = <&wf_2g_5g_pins>;
	pinctrl-1 = <&wf_dbdc_pins>;

	mediatek,mtd-eeprom = <&factory 0x0>;
};