openwrt/target/linux/realtek/dts/rtl8382_iodata_bsh-g24mb.dts

193 lines
3.5 KiB
Plaintext
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc";
model = "I-O DATA BSH-G24MB";
aliases {
led-boot = &led_sys_loop;
led-failsafe = &led_sys_loop;
led-upgrade = &led_sys_loop;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_disable_sys_led>;
compatible = "gpio-leds";
led_sys_loop: led {
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio1: rtl8231-gpio {
compatible = "realtek,rtl8231-gpio";
#gpio-cells = <2>;
gpio-controller;
indirect-access-bus-id = <0>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x10000>;
read-only;
};
partition@90000 {
label = "u-boot-env2";
reg = <0x90000 0x10000>;
};
partition@a0000 {
label = "jffs2_cfg";
reg = <0xa0000 0x100000>;
read-only;
};
partition@1a0000 {
label = "jffs2_log";
reg = <0x1a0000 0x100000>;
read-only;
};
/*
* use 2x OS partitions in OpenWrt
*
* 0x2A0000-0x94FFFF: RUNTIME
* 0x950000-0xFFFFFF: RUNTIME2 (not used in stock)
*/
partition@2a0000 {
compatible = "openwrt,uimage", "denx,uimage";
label = "firmware";
reg = <0x2a0000 0xd60000>;
openwrt,ih-magic = <0x83800013>;
};
};
};
};
&ethernet0 {
mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
EXTERNAL_PHY(0)
EXTERNAL_PHY(1)
EXTERNAL_PHY(2)
EXTERNAL_PHY(3)
EXTERNAL_PHY(4)
EXTERNAL_PHY(5)
EXTERNAL_PHY(6)
EXTERNAL_PHY(7)
INTERNAL_PHY(8)
INTERNAL_PHY(9)
INTERNAL_PHY(10)
INTERNAL_PHY(11)
INTERNAL_PHY(12)
INTERNAL_PHY(13)
INTERNAL_PHY(14)
INTERNAL_PHY(15)
EXTERNAL_PHY(16)
EXTERNAL_PHY(17)
EXTERNAL_PHY(18)
EXTERNAL_PHY(19)
EXTERNAL_PHY(20)
EXTERNAL_PHY(21)
EXTERNAL_PHY(22)
EXTERNAL_PHY(23)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(0, 1, qsgmii)
SWITCH_PORT(1, 2, qsgmii)
SWITCH_PORT(2, 3, qsgmii)
SWITCH_PORT(3, 4, qsgmii)
SWITCH_PORT(4, 5, qsgmii)
SWITCH_PORT(5, 6, qsgmii)
SWITCH_PORT(6, 7, qsgmii)
SWITCH_PORT(7, 8, qsgmii)
SWITCH_PORT(8, 9, internal)
SWITCH_PORT(9, 10, internal)
SWITCH_PORT(10, 11, internal)
SWITCH_PORT(11, 12, internal)
SWITCH_PORT(12, 13, internal)
SWITCH_PORT(13, 14, internal)
SWITCH_PORT(14, 15, internal)
SWITCH_PORT(15, 16, internal)
SWITCH_PORT(16, 17, qsgmii)
SWITCH_PORT(17, 18, qsgmii)
SWITCH_PORT(18, 19, qsgmii)
SWITCH_PORT(19, 20, qsgmii)
SWITCH_PORT(20, 21, qsgmii)
SWITCH_PORT(21, 22, qsgmii)
SWITCH_PORT(22, 23, qsgmii)
SWITCH_PORT(23, 24, qsgmii)
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};